aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/task-analyzer.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-06-15arm64: defconfig: Enable UBIFSDhruva Gole1-0/+2
UBIFS is a file system for flash devices which works on top of UBI. Signed-off-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230417092243.967871-1-d-gole@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-14arm64: defconfig: enable drivers for Verdin AM62Francesco Dolcini1-0/+3
Enable drivers used on Verdin AM62 [1] as modules: * PWM driver support for the EHRPWM controller * TC358768 parallel RGB to DSI bridge * SN65DSI83 DSI to LVDS bridge [1] https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230601131332.26877-3-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-13arm64: defconfig: Build SM6115 display and GPU clock controller driversKonrad Dybcio1-0/+2
Enable the clock controllers required for a good visual experience on Qualcomm SM6115 platform boards. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> [vzapolskiy: minimal changes to a commit message] Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230601075650.1437184-6-vladimir.zapolskiy@linaro.org
2023-06-13arm64: defconfig: Build display clock controller driver for QCM2290Vladimir Zapolskiy1-0/+1
Build display clock controller driver for Qualcomm QCM2290 platform. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230601075650.1437184-5-vladimir.zapolskiy@linaro.org
2023-06-13arm64: defconfig: Build interconnect driver for QCM2290Vladimir Zapolskiy1-0/+1
Build Qualcomm QCM2290 interconnect driver as a kernel module by default. QUPv3 GENI IP uses the interconnects and provides UARTs, but since the dependency is not yet displayed in the platform qcm2290.dtsi file, it could be assumed that the interconnect IP is preconfigured, thus building the driver as a module and placing it in an initramfs should be sufficient for booting up to rootfs stage. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230601075650.1437184-4-vladimir.zapolskiy@linaro.org
2023-06-13arm64: defconfig: Build Global Clock Controller driver for QCM2290Vladimir Zapolskiy1-0/+1
Build Qualcomm QCM2290 GCC driver. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230601075650.1437184-3-vladimir.zapolskiy@linaro.org
2023-06-13arm64: defconfig: Build MSM power manager driverVladimir Zapolskiy1-0/+1
Build Qualcomm MSM Power Manager driver, which is needed for QCM2290 platform, otherwise the TLMM pin controller driver probe fails on boot. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230601075650.1437184-2-vladimir.zapolskiy@linaro.org
2023-06-13arm64: defconfig: Enable sc828x0xp lpasscc clock controllerSrinivas Kandagatla1-0/+1
Enabled sc828x0xp lpasscc clock controller driver required for X13s laptop. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230608125315.11454-7-srinivas.kandagatla@linaro.org
2023-06-04arm64: defconfig: Enable the TI SN65DSI83 driverFabio Estevam1-0/+1
There are some imx8mm-based boards that contain an SN65DSI83 MIPI DSI to LVDS bridge chip. Add support for it so that the LVDS output can be functional by default. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-06-02arm64: defconfig: Enable Renesas MTU3a counter configBiju Das1-0/+3
Enable MFD & counter related configs for Renesas MTU3a Counter as it is populated on RZ/{G2L, LC, UL} and RZ/V2L SMARC EVKs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230417100607.309068-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-05-29arm64: defconfig: enable Mediatek PMIC keyAlexandre Mergnat1-0/+1
Some Mediatek PMIC devices can manage Power and Home keys (buttons). This patch enable the driver which handle the 2 keys managed by the Mediatek PMIC. Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20230203-evk-board-support-v8-2-7019f3fd0adf@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-05-29arm64: defconfig: enable MT6357 regulatorAlexandre Mergnat1-0/+1
Enable the power regulator support of MediaTek MT6357 PMIC. This driver supports the control of different power rails of device through regulator interface. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20230203-evk-board-support-v8-1-7019f3fd0adf@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-05-27ARM: imx_v6_v7_defconfig: Remove KERNEL_LZO configOtavio Salvador1-1/+0
The KERNEL_GZIP is used in most config and is the default, there is no clear reason to diverge so let default be used. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-05-26arm64: defconfig: Enable ipq6018 apss clock and PLL controllerDevi Priya1-0/+1
The PLL and IPQ6018 APSS clock controller are used on several IPQ platforms to clock the CPU. Hence it should be enabled and built-in. Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406061314.10916-6-quic_devipriy@quicinc.com
2023-05-26arm64: defconfig: Enable ARCH_SPARX5 and ARCH_REALTEKKrzysztof Kozlowski1-0/+3
Enable Microchip SparX-5 (ARCH_SPARX5) with its MMC controller and Realtek (ARCH_REALTEK) so their DTS will get built with defconfig and maybe platforms could be booted from it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230517143011.549319-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-23arm64: defconfig: enable FSA4480 driver as moduleNeil Armstrong1-0/+1
Enable the FSA4480 driver as module for Qualcomm HDK8350 and HDK8450 platforms to permit USB-C Altmode support. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230503-topic-sm8450-graphics-dp-next-v3-5-6c43d293995f@linaro.org
2023-05-21Linux 6.4-rc3Linus Torvalds1-1/+1
2023-05-21KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_saveMingwei Zhang1-1/+5
Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to save/restore the register value during migration. Missing this may cause userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the value to the target VM. In addition, there is no need to add MSR_IA32_TSX_CTRL when ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So add the checking in kvm_probe_msr_to_save(). Fixes: c11f83e0626b ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality") Reported-by: Jim Mattson <jmattson@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20230509032348.1153070-1-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-21KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)Sean Christopherson1-16/+0
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's allowed XCR0 when emulating ECREATE. Note, this could theoretically break a setup where userspace advertises a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID XFRM subleaf based on the guest's XCR0. Reviewed-by: Kai Huang <kai.huang@intel.com> Tested-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230503160838.3412617-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-21KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATESean Christopherson1-2/+9
Explicitly check the vCPU's supported XCR0 when determining whether or not the XFRM for ECREATE is valid. Checking CPUID works because KVM updates guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed XCR0, but that is rather subtle and KVM should not modify guest CPUID except for modeling true runtime behavior (allowed XFRM is most definitely not "runtime" behavior). Reviewed-by: Kai Huang <kai.huang@intel.com> Tested-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230503160838.3412617-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-20fbdev: stifb: Whitespace cleanupsHelge Deller1-3/+3
Missed whitespace cleanups in stifb. Fixes: 8000425739dc ("fbdev: stifb: Remove trailing whitespaces") Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-20fbdev: udlfb: Use usb_control_msg_send()Helge Deller1-11/+3
Use the newly introduced usb_control_msg_send() instead of usb_control_msg() when selecting the channel. Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-20block: remove NFL4_UFLG_MASKChristoph Hellwig1-2/+0
The NFL4_UFLG_MASK define slipped in in commit 9208d4149758 ("block: add a ->get_unique_id method") and should never have been added, as NFSD as the only user of it already has it's copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230520090010.527046-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-20fbdev: udlfb: Fix endpoint checkAlan Stern1-5/+8
The syzbot fuzzer detected a problem in the udlfb driver, caused by an endpoint not having the expected type: usb 1-1: Read EDID byte 0 failed: -71 usb 1-1: Unable to get valid EDID from device/display ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743 The current approach for this issue failed to catch the problem because it only checks for the existence of a bulk-OUT endpoint; it doesn't check whether this endpoint is the one that the driver will actually use. We can fix the problem by instead checking that the endpoint used by the driver does exist and is bulk-OUT. Reported-and-tested-by: syzbot+0e22d63dcebb802b9bc8@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Pavel Skripkin <paskripkin@gmail.com> Fixes: aaf7dbe07385 ("video: fbdev: udlfb: properly check endpoint type") Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-20fbdev: atyfb: Remove unused clock determinationNiklas Schnelle1-5/+0
Just below the removed lines par->clk_wr_offset is hard coded to 3 so there is no use in determining a different clock just to then ignore it anyway. This also removes the only I/O port use remaining in the driver allowing it to be built without CONFIG_HAS_IOPORT. Link: https://lore.kernel.org/all/ZBx5aLo5h546BzBt@intel.com/ Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-20fbdev: i810: include i810_main.h in i810_dvt.cArnd Bergmann1-1/+2
Building with W=1 shows that a header needs to be included to make the prototypes visible: drivers/video/fbdev/i810/i810_dvt.c:194:6: error: no previous prototype for 'round_off_xres' [-Werror=missing-prototypes] drivers/video/fbdev/i810/i810_dvt.c:233:6: error: no previous prototype for 'i810fb_encode_registers' [-Werror=missing-prototypes] drivers/video/fbdev/i810/i810_dvt.c:245:6: error: no previous prototype for 'i810fb_fill_var_timings' [-Werror=missing-prototypes] drivers/video/fbdev/i810/i810_dvt.c:279:5: error: no previous prototype for 'i810_get_watermark' [-Werror=missing-prototypes] Adding the header leads to another warning from a mismatched prototype, so fix this as well: drivers/video/fbdev/i810/i810_dvt.c:280:5: error: conflicting types for 'i810_get_watermark'; have 'u32(struct fb_var_screeninfo *, Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-20fbdev: fbmem: mark get_fb_unmapped_area() staticArnd Bergmann2-2/+2
There is a global function with this name on sparc, but no global declaration: drivers/video/fbdev/core/fbmem.c:1469:15: error: no previous prototype for 'get_fb_unmapped_area' Make the generic definition static to avoid this warning. On sparc, this is never seen. Edit by Helge: Update Kconfig text as suggested by Geert Uytterhoeven. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-19block: Deny writable memory mapping if block is read-onlyLoic Poulain1-1/+11
User should not be able to write block device if it is read-only at block level (e.g force_ro attribute). This is ensured in the regular fops write operation (blkdev_write_iter) but not when writing via user mapping (mmap), allowing user to actually write a read-only block device via a PROT_WRITE mapping. Example: This can lead to integrity issue of eMMC boot partition (e.g mmcblk0boot0) which is read-only by default. To fix this issue, simply deny shared writable mapping if the block is readonly. Note: Block remains writable if switch to read-only is performed after the initial mapping, but this is expected behavior according to commit a32e236eb93e ("Partially revert "block: fail op_is_write() requests to read-only partitions"")'. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230510074223.991297-1-loic.poulain@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-19s390/dasd: fix command reject error on ESE devicesStefan Haberland1-2/+31
Formatting a thin-provisioned (ESE) device that is part of a PPRC copy relation might fail with the following error: dasd-eckd 0.0.f500: An error occurred in the DASD device driver, reason=09 [...] 24 Byte: 0 MSG 4, no MSGb to SYSOP During format of an ESE disk the Release Allocated Space command is used. A bit in the payload of the command is set that is not allowed to be set for devices in a copy relation. This bit is set to allow the partial release of an extent. Check for the existence of a copy relation before setting the respective bit. Fixes: 91dc4a197569 ("s390/dasd: Add new ioctl to release space") Cc: stable@kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230519102340.3854819-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-19KVM: Fix vcpu_array[0] racesMichal Luczaj1-6/+10
In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's no failure path requiring vcpu removal and destruction. Such order is important because vcpu_array accessors may end up referencing vcpu at vcpu_array[0] even before online_vcpus is set to 1. When online_vcpus=0, any call to kvm_get_vcpu() goes through array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0): int num_vcpus = atomic_read(&kvm->online_vcpus); i = array_index_nospec(i, num_vcpus); return xa_load(&kvm->vcpu_array, i); Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over an "empty" range, but actually [0, ULONG_MAX]: xa_for_each_range(&kvm->vcpu_array, idx, vcpup, 0, \ (atomic_read(&kvm->online_vcpus) - 1)) In both cases, such online_vcpus=0 edge case, even if leading to unnecessary calls to XArray API, should not be an issue; requesting unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range(). However, this means that when the first vCPU is created and inserted in vcpu_array *and* before online_vcpus is incremented, code calling kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU. This should not pose a problem assuming that once a vcpu is stored in vcpu_array, it will remain there, but that's not the case: kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed from the vcpu_array, then destroyed: vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus); r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT); kvm_get_kvm(kvm); r = create_vcpu_fd(vcpu); if (r < 0) { xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx); kvm_put_kvm_no_destroy(kvm); goto unlock_vcpu_destroy; } atomic_inc(&kvm->online_vcpus); This results in a possible race condition when a reference to a vcpu is acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said vcpu is destroyed. Signed-off-by: Michal Luczaj <mhal@rbox.co> Message-Id: <20230510140410.1093987-2-mhal@rbox.co> Cc: stable@vger.kernel.org Fixes: c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-19KVM: VMX: Fix header file dependency of asm/vmx.hJacob Xu1-0/+2
Include a definition of WARN_ON_ONCE() before using it. Fixes: bb1fcc70d98f ("KVM: nVMX: Allow L1 to use 5-level page walks for nested EPT") Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Jacob Xu <jacobhxu@google.com> [reworded commit message; changed <asm/bug.h> to <linux/bug.h>] Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220225012959.1554168-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-19KVM: Don't enable hardware after a restart/shutdown is initiatedSean Christopherson1-1/+16
Reject hardware enabling, i.e. VM creation, if a restart/shutdown has been initiated to avoid re-enabling hardware between kvm_reboot() and machine_{halt,power_off,restart}(). The restart case is especially problematic (for x86) as enabling VMX (or clearing GIF in KVM_RUN on SVM) blocks INIT, which results in the restart/reboot hanging as BIOS is unable to wake and rendezvous with APs. Note, this bug, and the original issue that motivated the addition of kvm_reboot(), is effectively limited to a forced reboot, e.g. `reboot -f`. In a "normal" reboot, userspace will gracefully teardown userspace before triggering the kernel reboot (modulo bugs, errors, etc), i.e. any process that might do ioctl(KVM_CREATE_VM) is long gone. Fixes: 8e1c18157d87 ("KVM: VMX: Disable VMX when system shutdown") Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Message-Id: <20230512233127.804012-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-19KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdownSean Christopherson1-15/+11
Use syscore_ops.shutdown to disable hardware virtualization during a reboot instead of using the dedicated reboot_notifier so that KVM disables virtualization _after_ system_state has been updated. This will allow fixing a race in KVM's handling of a forced reboot where KVM can end up enabling hardware virtualization between kernel_restart_prepare() and machine_restart(). Rename KVM's hook to match the syscore op to avoid any possible confusion from wiring up a "reboot" helper to a "shutdown" hook (neither "shutdown nor "reboot" is completely accurate as the hook handles both). Opportunistically rewrite kvm_shutdown()'s comment to make it less VMX specific, and to explain why kvm_rebooting exists. Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: James Morse <james.morse@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Zenghui Yu <yuzenghui@huawei.com> Cc: kvmarm@lists.linux.dev Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Anup Patel <anup@brainfault.org> Cc: Atish Patra <atishp@atishpatra.org> Cc: kvm-riscv@lists.infradead.org Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Message-Id: <20230512233127.804012-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-19perf bench syscall: Fix __NR_execve undeclared build errorTiezhu Yang1-0/+3
The __NR_execve definition for i386 was deleted by mistake in the commit ece7f7c0507c ("perf bench syscall: Add fork syscall benchmark"), add it to fix the build error on i386. Fixes: ece7f7c0507cc147 ("perf bench syscall: Add fork syscall benchmark") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: loongson-kernel@lists.loongnix.cn Closes: https://lore.kernel.org/all/CA+G9fYvgBR1iB0CorM8OC4AM_w_tFzyQKHc+rF6qPzJL=TbfDQ@mail.gmail.com/ Link: https://lore.kernel.org/r/1684480657-2375-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-19fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()Dan Carpenter1-1/+2
This was using the wrong variable, "r", instead of "ddata->vcc_reg", so it returned success instead of a negative error code. Fixes: 0d3dbeb8142a ("video: fbdev: omapfb: panel-tpo-td043mtea1: Make use of the helper function dev_err_probe()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Helge Deller <deller@gmx.de>
2023-05-19perf test attr: Fix python SafeConfigParser() deprecation warningIan Rogers1-3/+3
Address the warning: ``` tests/attr.py:155: DeprecationWarning: The SafeConfigParser class has been renamed to ConfigParser in Python 3.2. This alias will be removed in Python 3.12. Use ConfigParser directly instead. parser = configparser.SafeConfigParser() ``` by removing the word 'Safe'. Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20230517225707.2682235-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-19perf test attr: Update no event/metric expectationsIan Rogers5-174/+249
Previously hard coded events/metrics were used, update for the use of the TopdownL1 json metric group. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Fixes: 94b1a603fca78388 ("perf stat: Add TopdownL1 metric as a default if present") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20230517225707.2682235-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-19driver core: class: properly reference count class_dev_iter()Greg Kroah-Hartman2-0/+3
When class_dev_iter is initialized, the reference count for the subsys private structure is incremented, but never decremented, causing a memory leak over time. To resolve this, save off a pointer to the internal structure into the class_dev_iter structure and then when the iterator is finished, drop the reference count. Reported-and-tested-by: syzbot+e7afd76ad060fa0d2605@syzkaller.appspotmail.com Fixes: 7b884b7f24b4 ("driver core: class.c: convert to only use class_to_subsys") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/r/2023051610-stove-condense-9a77@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-18nvme-pci: Add quirk for Teamgroup MP33 SSDDaniel Smith1-0/+2
Add a quirk for Teamgroup MP33 that reports duplicate ids for disk. Signed-off-by: Daniel Smith <dansmith@ds.gy> [kch: patch formatting] Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Daniel Smith <dansmith@ds.gy> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-05-18ublk: fix AB-BA lockdep warningMing Lei1-2/+7
When handling UBLK_IO_FETCH_REQ, ctx->uring_lock is grabbed first, then ub->mutex is acquired. When handling UBLK_CMD_STOP_DEV or UBLK_CMD_DEL_DEV, ub->mutex is grabbed first, then calling io_uring_cmd_done() for canceling uring command, in which ctx->uring_lock may be required. Real deadlock only happens when all the above commands are issued from same uring context, and in reality different uring contexts are often used for handing control command and IO command. Fix the issue by using io_uring_cmd_complete_in_task() to cancel command in ublk_cancel_dev(ublk_cancel_queue). Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/linux-block/becol2g7sawl4rsjq2dztsbc7mqypfqko6wzsyoyazqydoasml@rcxarzwidrhk Cc: Ziyang Zhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20230517133408.210944-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-18drm/amd/display: enable dpia validateMustapha Ghaddar1-0/+3
Use dpia_validate_usb4_bw() function Fixes: a8b537605e22 ("drm/amd/display: Add function pointer for validate bw usb4") Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-18drm/amd/pm: fix possible power mode mismatch between driver and PMFWEvan Quan3-19/+20
PMFW may boots the ASIC with a different power mode from the system's real one. Notify PMFW explicitly the power mode the system in. This is needed only when ACDC switch via gpio is not supported. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-05-18drm/amdgpu: skip disabling fence driver src_irqs when device is unpluggedGuchun Chen1-1/+2
When performing device unbind or halt, we have disabled all irqs at the very begining like amdgpu_pci_remove or amdgpu_device_halt. So amdgpu_irq_put for irqs stored in fence driver should not be called any more, otherwise, below calltrace will arrive. [ 139.114088] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:616 amdgpu_irq_put+0xf6/0x110 [amdgpu] [ 139.114655] Call Trace: [ 139.114655] <TASK> [ 139.114657] amdgpu_fence_driver_hw_fini+0x93/0x130 [amdgpu] [ 139.114836] amdgpu_device_fini_hw+0xb6/0x350 [amdgpu] [ 139.114955] amdgpu_driver_unload_kms+0x51/0x70 [amdgpu] [ 139.115075] amdgpu_pci_remove+0x63/0x160 [amdgpu] [ 139.115193] ? __pm_runtime_resume+0x64/0x90 [ 139.115195] pci_device_remove+0x3a/0xb0 [ 139.115197] device_remove+0x43/0x70 [ 139.115198] device_release_driver_internal+0xbd/0x140 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-18drm/amdgpu/gmc11: implement get_vbios_fb_size()Alex Deucher1-1/+20
Implement get_vbios_fb_size() so we can properly reserve the vbios splash screen to avoid potential artifacts on the screen during the transition from the pre-OS console to the OS console. Acked-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-05-18drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision idJesse Zhang1-19/+14
Due to the raven2 and raven/picasso maybe have the same GC_HWIP version. So differentiate them by revision id. Signed-off-by: shanshengwang <shansheng.wang@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-18drm/amdgpu/gfx11: Adjust gfxoff before powergating on gfx11 as wellGuilherme G. Piccoli1-1/+7
(Bas: speculative change to mirror gfx10/gfx9) Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-05-18drm/amdgpu/gfx10: Disable gfxoff before disabling powergating.Bas Nieuwenhuizen1-1/+7
Otherwise we get a full system lock (looks like a FW mess). Copied the order from the GFX9 powergating code. Fixes: 366468ff6c34 ("drm/amdgpu: Allow GfxOff on Vangogh as default") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2545 Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-05-18ceph: force updating the msg pointer in non-split caseXiubo Li1-0/+13
When the MClientSnap reqeust's op is not CEPH_SNAP_OP_SPLIT the request may still contain a list of 'split_realms', and we need to skip it anyway. Or it will be parsed as a corrupt snaptrace. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/61200 Reported-by: Frank Schilder <frans@dtu.dk> Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-05-18ceph: silence smatch warning in reconnect_caps_cb()Xiubo Li1-1/+2
Smatch static checker warning: fs/ceph/mds_client.c:3968 reconnect_caps_cb() warn: missing error code here? '__get_cap_for_mds()' failed. 'err' = '0' [ idryomov: Dan says that Smatch considers it intentional only if the "ret = 0;" assignment is within 4 or 5 lines of the goto. ] Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-05-17MAINTAINERS: skip CCing netdev for Bluetooth patchesJakub Kicinski1-0/+1
As requested by Marcel skip netdev for Bluetooth patches. Bluetooth has its own mailing list and overloading netdev leads to fewer people reading it. Link: https://lore.kernel.org/netdev/639C8EA4-1F6E-42BE-8F04-E4A753A6EFFC@holtmann.org/ Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230517014253.1233333-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.