diff options
Diffstat (limited to 'drivers/usb/storage')
| -rw-r--r-- | drivers/usb/storage/realtek_cr.c | 13 | ||||
| -rw-r--r-- | drivers/usb/storage/scsiglue.c | 26 | ||||
| -rw-r--r-- | drivers/usb/storage/sierra_ms.c | 4 | ||||
| -rw-r--r-- | drivers/usb/storage/uas.c | 35 |
4 files changed, 40 insertions, 38 deletions
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 31b024441938..cc794e25a0b6 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -763,18 +763,16 @@ static void rts51x_suspend_timer_fn(struct timer_list *t) break; case RTS51X_STAT_IDLE: case RTS51X_STAT_SS: - usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n", - atomic_read(&us->pusb_intf->pm_usage_cnt), + usb_stor_dbg(us, "RTS51X_STAT_SS, power.usage:%d\n", atomic_read(&us->pusb_intf->dev.power.usage_count)); - if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) { + if (atomic_read(&us->pusb_intf->dev.power.usage_count) > 0) { usb_stor_dbg(us, "Ready to enter SS state\n"); rts51x_set_stat(chip, RTS51X_STAT_SS); /* ignore mass storage interface's children */ pm_suspend_ignore_children(&us->pusb_intf->dev, true); usb_autopm_put_interface_async(us->pusb_intf); - usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n", - atomic_read(&us->pusb_intf->pm_usage_cnt), + usb_stor_dbg(us, "RTS51X_STAT_SS 01, power.usage:%d\n", atomic_read(&us->pusb_intf->dev.power.usage_count)); } break; @@ -807,11 +805,10 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) int ret; if (working_scsi(srb)) { - usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n", - atomic_read(&us->pusb_intf->pm_usage_cnt), + usb_stor_dbg(us, "working scsi, power.usage:%d\n", atomic_read(&us->pusb_intf->dev.power.usage_count)); - if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) { + if (atomic_read(&us->pusb_intf->dev.power.usage_count) <= 0) { ret = usb_autopm_get_interface(us->pusb_intf); usb_stor_dbg(us, "working scsi, ret=%d\n", ret); } diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index a73ea495d5a7..59190d88fa9f 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -65,6 +65,7 @@ static const char* host_info(struct Scsi_Host *host) static int slave_alloc (struct scsi_device *sdev) { struct us_data *us = host_to_us(sdev->host); + int maxp; /* * Set the INQUIRY transfer length to 36. We don't use any of @@ -74,20 +75,17 @@ static int slave_alloc (struct scsi_device *sdev) sdev->inquiry_len = 36; /* - * USB has unusual DMA-alignment requirements: Although the - * starting address of each scatter-gather element doesn't matter, - * the length of each element except the last must be divisible - * by the Bulk maxpacket value. There's currently no way to - * express this by block-layer constraints, so we'll cop out - * and simply require addresses to be aligned at 512-byte - * boundaries. This is okay since most block I/O involves - * hardware sectors that are multiples of 512 bytes in length, - * and since host controllers up through USB 2.0 have maxpacket - * values no larger than 512. - * - * But it doesn't suffice for Wireless USB, where Bulk maxpacket - * values can be as large as 2048. To make that work properly - * will require changes to the block layer. + * USB has unusual scatter-gather requirements: the length of each + * scatterlist element except the last must be divisible by the + * Bulk maxpacket value. Fortunately this value is always a + * power of 2. Inform the block layer about this requirement. + */ + maxp = usb_maxpacket(us->pusb_dev, us->recv_bulk_pipe, 0); + blk_queue_virt_boundary(sdev->request_queue, maxp - 1); + + /* + * Some host controllers may have alignment requirements. + * We'll play it safe by requiring 512-byte alignment always. */ blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c index 6ac60abd2e15..e605cbc3d8bf 100644 --- a/drivers/usb/storage/sierra_ms.c +++ b/drivers/usb/storage/sierra_ms.c @@ -194,8 +194,6 @@ int sierra_ms_init(struct us_data *us) kfree(swocInfo); } complete: - result = device_create_file(&us->pusb_intf->dev, &dev_attr_truinst); - - return 0; + return device_create_file(&us->pusb_intf->dev, &dev_attr_truinst); } diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index a6d68191c861..047c5922618f 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -789,24 +789,33 @@ static int uas_slave_alloc(struct scsi_device *sdev) { struct uas_dev_info *devinfo = (struct uas_dev_info *)sdev->host->hostdata; + int maxp; sdev->hostdata = devinfo; /* - * USB has unusual DMA-alignment requirements: Although the - * starting address of each scatter-gather element doesn't matter, - * the length of each element except the last must be divisible - * by the Bulk maxpacket value. There's currently no way to - * express this by block-layer constraints, so we'll cop out - * and simply require addresses to be aligned at 512-byte - * boundaries. This is okay since most block I/O involves - * hardware sectors that are multiples of 512 bytes in length, - * and since host controllers up through USB 2.0 have maxpacket - * values no larger than 512. + * We have two requirements here. We must satisfy the requirements + * of the physical HC and the demands of the protocol, as we + * definitely want no additional memory allocation in this path + * ruling out using bounce buffers. * - * But it doesn't suffice for Wireless USB, where Bulk maxpacket - * values can be as large as 2048. To make that work properly - * will require changes to the block layer. + * For a transmission on USB to continue we must never send + * a package that is smaller than maxpacket. Hence the length of each + * scatterlist element except the last must be divisible by the + * Bulk maxpacket value. + * If the HC does not ensure that through SG, + * the upper layer must do that. We must assume nothing + * about the capabilities off the HC, so we use the most + * pessimistic requirement. + */ + + maxp = usb_maxpacket(devinfo->udev, devinfo->data_in_pipe, 0); + blk_queue_virt_boundary(sdev->request_queue, maxp - 1); + + /* + * The protocol has no requirements on alignment in the strict sense. + * Controllers may or may not have alignment restrictions. + * As this is not exported, we use an extremely conservative guess. */ blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); |