wireguard-linux-compat/src/compat, branch master

compat: drop CentOS 8 Stream support

2022-06-29T13:36:49Z

Nobody uses this and it's impossible to maintain given the current CI situation. RHEL 7 and 8 release remain for now, though that might not always be the case. See the link for details. Link: https://lists.zx2c4.com/pipermail/wireguard/2022-June/007664.html Suggested-by: Philip J. Perry Signed-off-by: Jason A. Donenfeld

compat: do not backport ktime_get_coarse_boottime_ns to c8s

2022-06-28T10:44:18Z

Also bump the c8s version stamp. Reported-by: Vladimír Beneš Signed-off-by: Jason A. Donenfeld

compat: handle backported rng and blake2s

2022-06-22T15:14:00Z

Signed-off-by: Jason A. Donenfeld

device: check for metadata_dst with skb_valid_dst()

2022-04-14T12:49:25Z

When we try to transmit an skb with md_dst attached through wireguard we hit a null pointer dereference in wg_xmit() due to the use of dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to dereference dst->dev. Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which checks for DST_METADATA flag, and if it's set, then falls back to wireguard's device mtu. That gives us the best chance of transmitting the packet; otherwise if the blackhole netdev is used we'd get ETH_MIN_MTU. [ 263.693506] BUG: kernel NULL pointer dereference, address: 00000000000000e0 [ 263.693908] #PF: supervisor read access in kernel mode [ 263.694174] #PF: error_code(0x0000) - not-present page [ 263.694424] PGD 0 P4D 0 [ 263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522 [ 263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014 [ 263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20 [ 263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00 [ 263.696339] RSP: 0018:ffffa4a4422fbb28 EFLAGS: 00010246 [ 263.696600] RAX: 0000000000000000 RBX: ffff8ac9c3553000 RCX: 0000000000000000 [ 263.696891] RDX: 0000000000000401 RSI: 00000000fffffe01 RDI: ffffc4a43fb48900 [ 263.697178] RBP: ffffa4a4422fbb90 R08: ffffffff9622635e R09: 0000000000000002 [ 263.697469] R10: ffffffff9b69a6c0 R11: ffffa4a4422fbd0c R12: ffff8ac9d18b1a00 [ 263.697766] R13: ffff8ac9d0ce1840 R14: ffff8ac9d18b1a00 R15: ffff8ac9c3553000 [ 263.698054] FS: 00007f3704c337c0(0000) GS:ffff8acaebf40000(0000) knlGS:0000000000000000 [ 263.698470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 263.698826] CR2: 00000000000000e0 CR3: 0000000117a5c000 CR4: 00000000000006e0 [ 263.699214] Call Trace: [ 263.699505] [ 263.699759] wg_xmit+0x411/0x450 [ 263.700059] ? bpf_skb_set_tunnel_key+0x46/0x2d0 [ 263.700382] ? dev_queue_xmit_nit+0x31/0x2b0 [ 263.700719] dev_hard_start_xmit+0xd9/0x220 [ 263.701047] __dev_queue_xmit+0x8b9/0xd30 [ 263.701344] __bpf_redirect+0x1a4/0x380 [ 263.701664] __dev_queue_xmit+0x83b/0xd30 [ 263.701961] ? packet_parse_headers+0xb4/0xf0 [ 263.702275] packet_sendmsg+0x9a8/0x16a0 [ 263.702596] ? _raw_spin_unlock_irqrestore+0x23/0x40 [ 263.702933] sock_sendmsg+0x5e/0x60 [ 263.703239] __sys_sendto+0xf0/0x160 [ 263.703549] __x64_sys_sendto+0x20/0x30 [ 263.703853] do_syscall_64+0x3b/0x90 [ 263.704162] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 263.704494] RIP: 0033:0x7f3704d50506 [ 263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 [ 263.705652] RSP: 002b:00007ffe954b0b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 263.706141] RAX: ffffffffffffffda RBX: 0000558bb259b490 RCX: 00007f3704d50506 [ 263.706544] RDX: 000000000000004a RSI: 0000558bb259b7b2 RDI: 0000000000000003 [ 263.706952] RBP: 0000000000000000 R08: 00007ffe954b0b90 R09: 0000000000000014 [ 263.707339] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe954b0b90 [ 263.707735] R13: 000000000000004a R14: 0000558bb259b7b2 R15: 0000000000000001 [ 263.708132] [ 263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge] [ 263.708942] CR2: 00000000000000e0 Link: https://github.com/cilium/cilium/issues/19428 Reported-by: Martynas Pumputis Signed-off-by: Nikolay Aleksandrov Acked-by: Daniel Borkmann [Jason: polyfilled for < 4.3] Signed-off-by: Jason A. Donenfeld

queueing: use CFI-safe ptr_ring cleanup function

2022-03-02T22:49:51Z

We make too nuanced use of ptr_ring to entirely move to the skb_array wrappers, but we at least should avoid the naughty function pointer cast when cleaning up skbs. Otherwise RAP/CFI will honk at us. This patch uses the __skb_array_destroy_skb wrapper for the cleanup, rather than directly providing kfree_skb, which is what other drivers in the same situation do too. Reported-by: PaX Team Signed-off-by: Jason A. Donenfeld

compat: drop Ubuntu 14.04

2021-12-13T14:06:45Z

It's been over a year since we announced sunsetting this. Link: https://lore.kernel.org/wireguard/CAHmME9rckipsdZYW+LA=x6wCMybdFFA+VqoogFXnR=kHYiCteg@mail.gmail.com/T Signed-off-by: Jason A. Donenfeld

compat: udp_tunnel: don't take reference to non-init namespace

2021-12-06T17:34:54Z

The comment to sk_change_net is instructive: Kernel sockets, f.e. rtnl or icmp_socket, are a part of a namespace. They should not hold a reference to a namespace in order to allow to stop it. Sockets after sk_change_net should be released using sk_release_kernel We weren't following these rules before, and were instead using __sock_create, which means we kept a reference to the namespace, which in turn meant that interfaces were not cleaned up on namespace exit. Signed-off-by: Jason A. Donenfeld

compat: siphash: use _unaligned version by default

2021-12-03T22:24:03Z

On ARM v6 and later, we define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS because the ordinary load/store instructions (ldr, ldrh, ldrb) can tolerate any misalignment of the memory address. However, load/store double and load/store multiple instructions (ldrd, ldm) may still only be used on memory addresses that are 32-bit aligned, and so we have to use the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS macro with care, or we may end up with a severe performance hit due to alignment traps that require fixups by the kernel. Testing shows that this currently happens with clang-13 but not gcc-11. In theory, any compiler version can produce this bug or other problems, as we are dealing with undefined behavior in C99 even on architectures that support this in hardware, see also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363. Fortunately, the get_unaligned() accessors do the right thing: when building for ARMv6 or later, the compiler will emit unaligned accesses using the ordinary load/store instructions (but avoid the ones that require 32-bit alignment). When building for older ARM, those accessors will emit the appropriate sequence of ldrb/mov/orr instructions. And on architectures that can truly tolerate any kind of misalignment, the get_unaligned() accessors resolve to the leXX_to_cpup accessors that operate on aligned addresses. Since the compiler will in fact emit ldrd or ldm instructions when building this code for ARM v6 or later, the solution is to use the unaligned accessors unconditionally on architectures where this is known to be fast. The _aligned version of the hash function is however still needed to get the best performance on architectures that cannot do any unaligned access in hardware. This new version avoids the undefined behavior and should produce the fastest hash on all architectures we support. Reported-by: Ard Biesheuvel Signed-off-by: Arnd Bergmann Reviewed-by: Jason A. Donenfeld Acked-by: Ard Biesheuvel Signed-off-by: Jason A. Donenfeld

ratelimiter: use kvcalloc() instead of kvzalloc()

2021-12-03T22:24:03Z

Use 2-factor argument form kvcalloc() instead of kvzalloc(). Signed-off-by: Gustavo A. R. Silva Signed-off-by: Jason A. Donenfeld

device: reset peer src endpoint when netns exits

2021-12-03T22:24:03Z

Each peer's endpoint contains a dst_cache entry that takes a reference to another netdev. When the containing namespace exits, we take down the socket and prevent future sockets from being created (by setting creating_net to NULL), which removes that potential reference on the netns. However, it doesn't release references to the netns that a netdev cached in dst_cache might be taking, so the netns still might fail to exit. Since the socket is gimped anyway, we can simply clear all the dst_caches (by way of clearing the endpoint src), which will release all references. However, the current dst_cache_reset function only releases those references lazily. But it turns out that all of our usages of wg_socket_clear_peer_endpoint_src are called from contexts that are not exactly high-speed or bottle-necked. For example, when there's connection difficulty, or when userspace is reconfiguring the interface. And in particular for this patch, when the netns is exiting. So for those cases, it makes more sense to call dst_release immediately. For that, we add a small helper function to dst_cache. This patch also adds a test to netns.sh from Hangbin Liu to ensure this doesn't regress. Test-by: Hangbin Liu Reported-by: Xiumei Mu Signed-off-by: Jason A. Donenfeld