wireguard-linux/Documentation/devicetree/bindings/connector, branch jd/unified-crypt-queue

dt-bindings: Convert usb-connector to YAML format.

2020-03-12T19:02:35Z

Convert the usb-connector.txt bindings file to YAML format. This allows it to be used in dt_bindings_check verification. This patch was born out of a patch series for the addition of a Type C connector class port driver[1]. An attempt has been made to maintain the same documentation text and example structure as was in the .txt file, but wherever needed modifications have been made to satisfy dt_bindings_check. Also, update all references to usb-connector.txt to now use usb-connector.yaml. [1]: https://lkml.org/lkml/2020/2/19/1232 Signed-off-by: Prashant Malani Reviewed-by: Benson Leung Signed-off-by: Rob Herring

dt-bindings: connector: Improve the english of the initial description

2019-12-10T10:34:29Z

The description lacks a few indefinite articles when reading and as a result is a bit clunky to read. Introduce a few indefinite articles to appease the grammar gods. Cc: Andrzej Hajda Cc: Rob Herring Cc: Chanwoo Choi Cc: linux-usb@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20191128134358.3880498-3-bryan.odonoghue@linaro.org Signed-off-by: Greg Kroah-Hartman

dt-bindings: connector: add optional properties for Type-B

2019-09-03T14:00:39Z

Add id-gpios, vbus-gpios, vbus-supply and pinctrl properties for usb-b-connector Signed-off-by: Chunfeng Yun Reviewed-by: Rob Herring Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/1567070558-29417-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: connector: Spelling mistake

2019-04-10T21:33:48Z

Cosmetic change multpile -> multiple. Fixes: 593aa2b405f9 ("dt-bindings: add bindings for USB physical connector") Signed-off-by: Miquel Raynal Signed-off-by: Rob Herring

dt-bindings: connector: Add self-powered property

2018-11-07T12:20:39Z

>From USB_PD_R3_0 7.1.5 Response to Hard Resets Device operation during and after a Hard Reset is defined as follows: Self-powered devices Should Not disconnect from USB during a Hard Reset (see Section 9.1.2). Bus powered devices will disconnect from USB during a Hard Reset due to the loss of their power source. Therefore it is necessary to know whether the port belongs to a device which is self powered or bus powered. This change adds "self-powered" flag to the connector class which present indicates that the port belongs to a device that is self powered. Else it is bus powered usb device. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Rob Herring ------- Changes is v3: - Rebase on top of usb-next - no change w.r.t to this patch. Same as previous versions. No v2 version as the patch was introduced there. Signed-off-by: Greg Kroah-Hartman

dt-bindings: connector: Add support for USB-PD PPS APDOs to bindings

2018-09-20T10:56:02Z

Add support for PPS APDOs to connector bindings so a port controller can specify support for PPS, as per existing FIXED/BATT/VAR PDOs. Signed-off-by: Adam Thomson Reviewed-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

dt-bindings: connector: add properties for typec

2018-06-28T10:49:47Z

Add bindings supported by current typec driver, so user can pass all those properties via dt. Reviewed-by: Rob Herring Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman

dt-bindings: add bindings for Samsung micro-USB 11-pin connector

2018-03-07T02:24:00Z

Samsung micro-USB 11-pin connector beside standard micro-USB pins, has pins dedicated to route MHL traffic. Signed-off-by: Andrzej Hajda Reviewed-by: Rob Herring Signed-off-by: Chanwoo Choi

dt-bindings: add bindings for USB physical connector

2018-03-07T02:22:46Z

These bindings allow to describe most known standard USB connectors and it should be possible to extend it if necessary. USB connectors, beside USB can be used to route other protocols, for example UART, Audio, MHL. In such case every device passing data through the connector should have appropriate graph bindings. Signed-off-by: Andrzej Hajda Reviewed-by: Rob Herring Signed-off-by: Chanwoo Choi