wireguard-linux/Documentation/devicetree/bindings/eeprom, branch jd/unified-crypt-queue

dt-bindings: Add missing 'additionalProperties: false'

2020-03-31T15:03:17Z

Setting 'additionalProperties: false' is frequently omitted, but is important in order to check that there aren't extra undocumented properties in a binding. Ideally, we'd just add this automatically and make this the default, but there's some cases where it doesn't work. For example, if a common schema is referenced, then properties in the common schema aren't part of what's considered for 'additionalProperties'. Also, sometimes there are bus specific properties such as 'spi-max-frequency' that go into bus child nodes, but aren't defined in the child node's schema. So let's stick with the json-schema defined default and add 'additionalProperties: false' where needed. This will be a continual review comment and game of wack-a-mole. Signed-off-by: Rob Herring Reviewed-by: Neil Armstrong Acked-by: Mark Brown Acked-by: Jonathan Cameron Acked-by: Alexandru Ardelean Reviewed-by: Benjamin Gaignard Acked-by: Stephen Boyd # clock Acked-by: Lee Jones

dt-binding: eeprom: at24: add vcc-supply property

2020-01-23T11:42:40Z

In some platforms, they disable the power-supply of eeprom due to power consumption reduction. This patch add vcc-supply property. Signed-off-by: Bibby Hsieh Reviewed-by: Rob Herring Signed-off-by: Bartosz Golaszewski

dt-bindings: at25: add reference for the wp-gpios property

2020-01-14T15:05:03Z

As the at25 uses the NVMEM subsystem, and the property is now being handled, adding reference for it in the device tree binding document, which allows to specify the GPIO line to which the write-protect pin is connected. Signed-off-by: Khouloud Touil Reviewed-by: Rob Herring Acked-by: Greg Kroah-Hartman Signed-off-by: Bartosz Golaszewski

dt-bindings: at24: make wp-gpios a reference to the property defined by nvmem

2020-01-09T09:49:11Z

NVMEM framework is an interface for the at24 EEPROMs as well as for other drivers, instead of passing the wp-gpios over the different drivers each time, it would be better to pass it over the NVMEM subsystem once and for all. Making wp-gpios a reference to the property defined by nvmem. Signed-off-by: Khouloud Touil Reviewed-by: Linus Walleij Reviewed-by: Rob Herring Signed-off-by: Bartosz Golaszewski

dt-bindings: at24: add new compatible

2019-10-09T23:24:04Z

arch/arm/boot/dts/at91-dvk_som60.dt.yaml uses the compatible string 'giantec,gt24c32a' for an at24 EEPROM with a fallback to 'atmel,24c32'. Add this model as a special case to the binding document. Reported-by: Rob Herring Signed-off-by: Bartosz Golaszewski Signed-off-by: Rob Herring

dt-bindings: at24: convert the binding document to yaml

2019-10-09T23:23:52Z

Convert the binding document for at24 EEPROMs from txt to yaml. The compatible property uses a regex pattern to address all the possible combinations of "vendor,model" strings. Signed-off-by: Bartosz Golaszewski [robh: rework compatible schema, fix missing allOf for $ref, fix errors in example] Signed-off-by: Rob Herring [Bartosz: added comments explaining the compatible property] Signed-off-by: Bartosz Golaszewski Signed-off-by: Rob Herring

dt-bindings: eeprom: at25: Add Anvo ANV32E61W

2019-08-24T20:44:26Z

Document the compatible for ANV32E61W 64kb Serial SPI non-volatile SRAM. Although it is a SRAM device, it can be accessed through EEPROM interface. At least until there is no proper SRAM driver support for it. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo

dt-bindings: at24: add Renesas R1EX24016

2019-03-21T08:57:48Z

Document the compatible value for the Renesas R1EX24128ASAS0A two-wire serial interface EEPROM, so it can be used in DTS files without causing checkpatch warnings. This is a 2 KiB EEPROM. The first 1 KiB can always be written, the second 1 KiB cannot be written if the write-protect line is asserted. Signed-off-by: Geert Uytterhoeven Signed-off-by: Bartosz Golaszewski

dt-bindings: at24: add the 'num-addresses' property

2019-02-14T08:32:25Z

Currently the at24 driver only creates additional i2c dummies for atmel,24c00 and it's hard-coded. Some other chips (like for example Microchip's 24AA02T) also take more slave addresses despite being otherwise compatible with already supported variants. Add a new property to the device tree binding document that defines the total number of i2c slave addresses taken by the device. The addresses are counted starting from the one in the reg property. Signed-off-by: Bartosz Golaszewski

dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string

2018-12-10T15:23:27Z

Add new compatible to the device tree bindings. Signed-off-by: Adrian Bunk Acked-by: Rob Herring Signed-off-by: Bartosz Golaszewski