wireguard-linux/Documentation/devicetree/bindings/spi, branch jd/unified-crypt-queue

Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-04-03T22:22:05Z

Pull ARM devicetree updates from Arnd Bergmann: "Most of the commits are for additional hardware support and minor fixes for existing machines for all the usual platforms: qcom, amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap, and versatile. The conversion of binding files to machine-readable yaml format continues, along with fixes found during the validation. Andre Przywara takes over maintainership for the old Calxeda Highbank platform and provides a number of updates. The OMAP2+ platforms see a continued move from platform data into dts files, for many devices that relied on a mix of auxiliary data in addition to the DT description A moderate number of new SoCs and machines are added, here is a full list: - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865 (SM8250) is the current high-end phone chip, and IPQ6018 is a new WiFi-6 router chip. - Mediatek MT8516 application processor SoC for voice assistants, along with the "pumpkin" development board - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an evaluation board. - Kontron "sl28" board family based on NXP LS1028A - Eleven variations of the new i.MX6 TechNexion Pico board, combining the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7 SoM carriers - Three additional variants of the Toradex Colibri board family, all based on versions of the NXP i.MX7. - The Pinebook Pro laptop based on Rockchip RK3399 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on the ST-Ericsson u8500 platform - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on STMicroelectronics stm32mp157 - Renesas M3ULCB starter kit for R-Car M3-W+ - Hoperun HiHope development board with Renesas RZ/G2M - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13" * tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits) ARM: dts: ux500: Fix missing node renames arm64: dts: Revert "specify console via command line" MAINTAINERS: Update Calxeda Highbank maintainership arm: dts: calxeda: Group port-phys and sgpio-gpio items arm: dts: calxeda: Fix interrupt grouping arm: dts: calxeda: Provide UART clock arm: dts: calxeda: Basic DT file fixes arm64: dts: specify console via command line ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node ...

Merge tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2020-04-03T00:32:52Z

Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ...

dt-bindings: spi: Add interconnect binding for QSPI

2020-03-31T15:03:33Z

Add documentation for the interconnect and interconnect-names properties for QSPI. Signed-off-by: Akash Asthana Signed-off-by: Rob Herring

dt-bindings: spi: Convert QSPI bindings to YAML

2020-03-31T15:03:33Z

Convert QSPI bindings to DT schema format using json-schema. Signed-off-by: Akash Asthana Signed-off-by: Rob Herring

Merge branch 'spi-5.7' into spi-next

2020-03-27T15:53:00Z

spi: dt-bindings: spi-controller: Fix spi-[rt]x-bus-width for slave mode

2020-03-13T17:06:34Z

The descriptions for the spi-rx-bus-width and spi-tx-bus-width properties refer to "MISO" and "MOSI", which are not explained in the document. While these abbreviations are fairly common when talking about SPI, and thus may not need an explanation, they are not entirely correct in this context, as the SPI controller may be used in slave mode instead of master mode. Fix this by replacing them by "read transfers" resp. "write transfers", like is done for the spi-rx-delay-us and spi-tx-delay-us properties. Signed-off-by: Geert Uytterhoeven Acked-by: Rob Herring Link: https://lore.kernel.org/r/20200306085038.8111-3-geert+renesas@glider.be Signed-off-by: Mark Brown

spi: dt-bindings: spi-controller: Fix #address-cells for slave mode

2020-03-13T17:06:33Z

Currently, the DT bindings for an SPI controller specify that "#address-cells" must be fixed to one. However, that applies to an SPI controller in master mode only. When running in SPI slave mode, "#address-cells" should not be specified. Fix this making "#address-cells" mutually-exclusive with "spi-slave". Fixes: 0a1b929356830257 ("spi: Add YAML schemas for the generic SPI options") Reported-by: Yoshihiro Shimoda Signed-off-by: Geert Uytterhoeven Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20200306085038.8111-2-geert+renesas@glider.be Signed-off-by: Mark Brown

spi: dt-bindings: amlogic, meson-gx-spicc: add Amlogic G12A compatible

2020-03-12T17:22:56Z

The Amlogic G12A SPICC controllers uses a secondary clock used to feed the baud rate generator and the delay control logic. Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20200312133131.26430-9-narmstrong@baylibre.com Signed-off-by: Mark Brown

Merge tag 'mtk-mtd-spi-move' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.7

2020-03-11T19:58:20Z

spi: Rewrite mtk-quadspi spi-nor driver with spi-mem This patchset from Chuanhong Guo adds a spi-mem driver for Mediatek SPI-NOR controller, which already has limited support by mtk-quadspi. This new driver can make use of full quadspi capability of this controller.

dt-bindings: convert mtk-quadspi binding doc for spi-mtk-nor

2020-03-11T19:56:08Z

spi-mtk-nor is a driver to replace mtk-quadspi and they have almost the same device-tree bindings. Reuse this binding documentation and convert it for new driver: 1. "Mediatek SoCs" -> "Mediatek ARM SoCs" because MTK MIPS SoCs use different controllers. 2. document "interrupts" as a required property because it's available on all SoCs with this controller and new driver takes advantages of it. It's implemented as optional only to maintain backward compatibility. 3. add a dummy interrupt binding in example. Signed-off-by: Chuanhong Guo Link: https://lore.kernel.org/r/20200306085052.28258-4-gch981213@gmail.com Signed-off-by: Mark Brown