wireguard-linux/Documentation/devicetree/bindings/usb, branch jd/unified-crypt-queue

Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-04-03T22:02:35Z

Pull ARM SoC updates from Arnd Bergmann: "The code changes are mostly for 32-bit platforms and include: - Lots of updates for the Nvidia Tegra platform, including cpuidle, pmc, and dt-binding changes - Microchip at91 power management updates for the recently added sam9x60 SoC - Treewide setup_irq deprecation by afzal mohammed - STMicroelectronics stm32 gains earlycon support - Renesas platforms with Cortex-A9 can now use the global timer - Some TI OMAP2+ platforms gain cpuidle support - Various cleanups for the i.MX6 and Orion platforms, as well as Kconfig files across all platforms" * tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits) ARM: qcom: Add support for IPQ40xx ARM: mmp: replace setup_irq() by request_irq() ARM: cns3xxx: replace setup_irq() by request_irq() ARM: spear: replace setup_irq() by request_irq() ARM: ep93xx: Replace setup_irq() by request_irq() ARM: iop32x: replace setup_irq() by request_irq() arm: mach-dove: Mark dove_io_desc as __maybe_unused ARM: orion: replace setup_irq() by request_irq() ARM: debug: stm32: add UART early console support for STM32MP1 ARM: debug: stm32: add UART early console support for STM32H7 ARM: debug: stm32: add UART early console configuration for STM32F7 ARM: debug: stm32: add UART early console configuration for STM32F4 cpuidle: tegra: Disable CC6 state if LP2 unavailable cpuidle: tegra: Squash Tegra114 driver into the common driver cpuidle: tegra: Squash Tegra30 driver into the common driver cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle ARM: tegra: cpuidle: Remove unnecessary memory barrier ARM: tegra: cpuidle: Make abort_flag atomic ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2 ARM: tegra: Make outer_disable() open-coded ...

Merge tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2020-04-03T00:32:52Z

Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ...

dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb

2020-03-31T22:08:38Z

The amlogic,meson-gxbb-usb compatible needs snps,dwc2 aswell like other Amlogic SoC. Fixes: f3ca745d8a0e ("dt-bindings: usb: Convert DWC2 bindings to json-schema") Reviewed-by: Benjamin Gaignard Signed-off-by: Neil Armstrong Signed-off-by: Rob Herring

dt-bindings: usb: Convert jz4740-musb doc to YAML

2020-03-17T19:03:27Z

Convert ingenic,jz4740-musb.txt to ingenic,musb.yaml, and add the new ingenic,jz4770-musb and ingenic,jz4725b-musb compatible strings in the process. Signed-off-by: Paul Cercueil Reviewed-by: Rob Herring Signed-off-by: Bin Liu Link: https://lore.kernel.org/r/20200316211136.2274-3-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2020-03-16T07:22:49Z

Felipe writes: USB: changes for v5.7 merge window Lots of changes on dwc3 this time, most of them from Thinh fixing a bunch of really old mishaps on the driver. DWC2 got support for STM32MP15 and a couple RockChip SoCs while DWC3 learned about Amlogic A1 family. Apart from these, we have a few spelling fixes and other minor non-critical fixes all over the place. Signed-off-by: Felipe Balbi * tag 'usb-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (41 commits) dt-bindings: usb: add documentation for aspeed usb-vhub ARM: dts: aspeed-g4: add vhub port and endpoint properties ARM: dts: aspeed-g5: add vhub port and endpoint properties ARM: dts: aspeed-g6: add usb functions usb: gadget: aspeed: add ast2600 vhub support usb: gadget: aspeed: read vhub properties from device tree usb: gadget: aspeed: support per-vhub usb descriptors usb: gadget: f_phonet: Replace zero-length array with flexible-array member usb: gadget: composite: Inform controller driver of self-powered usb: gadget: amd5536udc: fix spelling mistake "reserverd" -> "reserved" udc: s3c-hsudc: Silence warning about supplies during deferred probe usb: dwc2: Silence warning about supplies during deferred probe dt-bindings: usb: dwc2: add compatible property for rk3368 usb dt-bindings: usb: dwc2: add compatible property for rk3328 usb usb: gadget: add raw-gadget interface usb: dwc2: Implement set_selfpowered() usb: dwc3: qcom: Replace by usb: dwc3: core: don't do suspend for device mode if already suspended usb: dwc3: Rework resets initialization to be more flexible usb: dwc3: Rework clock initialization to be more flexible ...

dt-bindings: usb: add documentation for aspeed usb-vhub

2020-03-15T10:12:37Z

Add device tree binding documentation for the Aspeed USB 2.0 Virtual HUb Controller. Reviewed-by: Rob Herring Signed-off-by: Tao Ren Reviewed-by: Joel Stanley Signed-off-by: Felipe Balbi

dt-bindings: usb: dwc2: add compatible property for rk3368 usb

2020-03-15T09:36:18Z

A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dt.yaml: usb@ff580000: compatible: ['rockchip,rk3368-usb', 'rockchip,rk3066-usb', 'snps,dwc2'] is not valid under any of the given schemas The compatible property for rk3368 dwc2 usb was somehow never added to the documention. Fix this error by adding 'rockchip,rk3368-usb', 'rockchip,rk3066-usb', 'snps,dwc2' to dwc2.yaml. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml Signed-off-by: Johan Jonker Signed-off-by: Felipe Balbi

dt-bindings: usb: dwc2: add compatible property for rk3328 usb

2020-03-15T09:36:14Z

A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff580000: compatible: ['rockchip,rk3328-usb', 'rockchip,rk3066-usb', 'snps,dwc2'] is not valid under any of the given schemas The compatible property for rk3328 dwc2 usb was somehow never added to the documention. Fix this error by adding 'rockchip,rk3328-usb', 'rockchip,rk3066-usb', 'snps,dwc2' to dwc2.yaml. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml Signed-off-by: Johan Jonker Signed-off-by: Felipe Balbi

dt-bindings: usb: dwc3: Allow clock list & resets to be more flexible

2020-03-15T09:30:47Z

Rather then adding another device specific binding to support hikey960, Rob Herring suggested we expand the current dwc3 binding to allow for variable numbers of clocks and resets. Cc: Greg Kroah-Hartman Cc: Rob Herring Cc: Mark Rutland CC: ShuFan Lee Cc: Heikki Krogerus Cc: Suzuki K Poulose Cc: Chunfeng Yun Cc: Yu Chen Cc: Felipe Balbi Cc: Hans de Goede Cc: Andy Shevchenko Cc: Jun Li Cc: Valentin Schneider Cc: Guillaume Gardet Cc: Jack Pham Cc: linux-usb@vger.kernel.org Cc: devicetree@vger.kernel.org Suggested-by: Rob Herring Reviewed-by: Rob Herring Signed-off-by: John Stultz Signed-off-by: Felipe Balbi

dt-bindings: usb: generic: Add role-switch-default-mode binding

2020-03-15T09:30:36Z

Add binding to configure the default role the controller assumes is host mode when the usb role is USB_ROLE_NONE. Cc: Greg Kroah-Hartman Cc: Rob Herring Cc: Mark Rutland CC: ShuFan Lee Cc: Heikki Krogerus Cc: Suzuki K Poulose Cc: Chunfeng Yun Cc: Yu Chen Cc: Felipe Balbi Cc: Hans de Goede Cc: Andy Shevchenko Cc: Jun Li Cc: Valentin Schneider Cc: Guillaume Gardet Cc: Jack Pham Cc: Bryan O'Donoghue Cc: linux-usb@vger.kernel.org Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring Signed-off-by: John Stultz Signed-off-by: Felipe Balbi