WireGuard for the Linux kernel https://git.zx2c4.com/wireguard-linux/atom/Documentation/devicetree/bindings?h=jd%2Forphan-parallel 2020-10-23T19:05:49Z 2020-10-23T19:05:49Z Linus Torvalds torvalds@linux-foundation.org 2020-10-23T19:05:49Z urn:sha1:3cb12d27ff655e57e8efe3486dca2a22f4e30578 Pull networking fixes from Jakub Kicinski: "Cross-tree/merge window issues: - rtl8150: don't incorrectly assign random MAC addresses; fix late in the 5.9 cycle started depending on a return code from a function which changed with the 5.10 PR from the usb subsystem Current release regressions: - Revert "virtio-net: ethtool configurable RXCSUM", it was causing crashes at probe when control vq was not negotiated/available Previous release regressions: - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO bus, only first device would be probed correctly - nexthop: Fix performance regression in nexthop deletion by effectively switching from recently added synchronize_rcu() to synchronize_rcu_expedited() - netsec: ignore 'phy-mode' device property on ACPI systems; the property is not populated correctly by the firmware, but firmware configures the PHY so just keep boot settings Previous releases - always broken: - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing bulk transfers getting "stuck" - icmp: randomize the global rate limiter to prevent attackers from getting useful signal - r8169: fix operation under forced interrupt threading, make the driver always use hard irqs, even on RT, given the handler is light and only wants to schedule napi (and do so through a _irqoff() variant, preferably) - bpf: Enforce pointer id generation for all may-be-null register type to avoid pointers erroneously getting marked as null-checked - tipc: re-configure queue limit for broadcast link - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels - fix various issues in chelsio inline tls driver Misc: - bpf: improve just-added bpf_redirect_neigh() helper api to support supplying nexthop by the caller - in case BPF program has already done a lookup we can avoid doing another one - remove unnecessary break statements - make MCTCP not select IPV6, but rather depend on it" * tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) tcp: fix to update snd_wl1 in bulk receiver fast path net: Properly typecast int values to set sk_max_pacing_rate netfilter: nf_fwd_netdev: clear timestamp in forwarding path ibmvnic: save changed mac address to adapter->mac_addr selftests: mptcp: depends on built-in IPv6 Revert "virtio-net: ethtool configurable RXCSUM" rtnetlink: fix data overflow in rtnl_calcit() net: ethernet: mtk-star-emac: select REGMAP_MMIO net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh() bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop mptcp: depends on IPV6 but not as a module sfc: move initialisation of efx->filter_sem to efx_init_struct() mpls: load mpls_gso after mpls_iptunnel net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action() net: dsa: bcm_sf2: make const array static, makes object smaller mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it ... 2020-10-22T19:56:33Z Linus Torvalds torvalds@linux-foundation.org 2020-10-22T19:56:33Z urn:sha1:1553d96854b47953e41e7f66b2bdbc1c0d13a3e5 Pull remoteproc updates from Bjorn Andersson: "This introduces support for the Mediatek MT9182 SCP and controlling the Cortex R5F processors found in TI K3 platforms. It clones the longstanding debugfs interface for controlling crash handling to sysfs. Lastly it solves a bug where after a warm reset of Qualcomm platforms the modem would crash upon first boot" * tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc/mediatek: Remove non-standard dsb() remoteproc: Add recovery configuration to the sysfs interface remoteproc: Add coredump as part of sysfs interface remoteproc: Change default dump configuration to "disabled" remoteproc: k3-r5: Add loading support for on-chip SRAM regions remoteproc: k3-r5: Initialize TCM memories for ECC remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs remoteproc/mediatek: Add support for mt8192 SCP remoteproc: Fixup coredump debugfs disable request remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot remoteproc/mediatek: fix null pointer dereference on null scp pointer remoteproc: stm32: Fix pointer assignement remoteproc: scp: add COMPILE_TEST dependency 2020-10-22T19:53:28Z Linus Torvalds torvalds@linux-foundation.org 2020-10-22T19:53:28Z urn:sha1:3fec0eaaf04adf5e23b2704f5490d5943fb8b0b1 Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits) clk: imx8mq: Fix usdhc parents order clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: Restrict CLK_HSDK to ARC_SOC_HSDK clk: at91: sam9x60: support only two programmable clocks clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks clk: bcm2835: add missing release if devm_clk_hw_register fails clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name clk: clk-prima2: fix return value check in prima2_clk_init() clk: mmp2: Fix the display clock divider base clk: pxa: Constify static struct clk_ops clk: baikal-t1: Mark Ethernet PLL as critical clk: qoriq: modify MAX_PLL_DIV to 32 clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers ... 2020-10-22T19:51:32Z Linus Torvalds torvalds@linux-foundation.org 2020-10-22T19:51:32Z urn:sha1:ceae608a54898fff2aa0aba358fe81af027ef8c9 Pull pwm updates from Thierry Reding: "This release cycle's updates are mostly cleanup and some minor fixes" * tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support pwm: Allow store 64-bit duty cycle from sysfs interface pwm: img: Fix null pointer access in probe pwm: pca9685: Disable unused alternative addresses pwm: pca9685: Use BIT() macro instead of shift pwm: pca9685: Make comments more consistent pwm: sun4i: Simplify with dev_err_probe() pwm: sprd: Simplify with dev_err_probe() pwm: sifive: Simplify with dev_err_probe() pwm: rockchip: Simplify with dev_err_probe() pwm: jz4740: Simplify with dev_err_probe() pwm: bcm2835: Simplify with dev_err_probe() pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro pwm: rockchip: Keep enabled PWMs running while probing dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support 2020-10-22T19:41:00Z Linus Torvalds torvalds@linux-foundation.org 2020-10-22T19:41:00Z urn:sha1:00937f36b09e89c74e4a059dbb8acbf4b971d5eb Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ... 2020-10-21T18:28:43Z Linus Torvalds torvalds@linux-foundation.org 2020-10-21T18:28:43Z urn:sha1:f804b3159482eedbb4250b1e9248c308fb63b805 Pull watchdog updates from Wim Van Sebroeck: - Add Toshiba Visconti watchdog driver - it87_wdt: add IT8772 + IT8784 - several fixes and improvements * tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Add Toshiba Visconti watchdog driver watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device watchdog: it87_wdt: add IT8784 ID watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3 watchdog: renesas_wdt: support handover from bootloader watchdog: imx7ulp: Watchdog should continue running for wait/stop mode watchdog: rti: Simplify with dev_err_probe() watchdog: davinci: Simplify with dev_err_probe() watchdog: cadence: Simplify with dev_err_probe() watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h> watchdog: Use put_device on error watchdog: Fix memleak in watchdog_cdev_register watchdog: imx7ulp: Strictly follow the sequence for wdog operations watchdog: it87_wdt: add IT8772 ID watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed drivers: watchdog: rdc321x_wdt: Fix race condition bugs 2020-10-21T18:22:08Z Linus Torvalds torvalds@linux-foundation.org 2020-10-21T18:22:08Z urn:sha1:b7769c45b8d95f1c70b9dec38c8de8ad229ce222 Pull RTC updates from Alexandre Belloni: "A new driver this cycle is making the bulk of the changes and the rx8010 driver has been rework to use the modern APIs. Summary: Subsystem: - new generic DT properties: aux-voltage-chargeable, trickle-voltage-millivolt New driver: - Microcrystal RV-3032 Drivers: - ds1307: use aux-voltage-chargeable - r9701, rx8010: modernization of the driver - rv3028: fix clock output, trickle resistor values, RAM configuration registers" * tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits) rtc: r9701: set range rtc: r9701: convert to devm_rtc_allocate_device rtc: r9701: stop setting RWKCNT rtc: r9701: remove useless memset rtc: r9701: stop setting a default time rtc: r9701: remove leftover comment rtc: rv3032: Add a driver for Microcrystal RV-3032 dt-bindings: rtc: rv3032: add RV-3032 bindings dt-bindings: rtc: add trickle-voltage-millivolt rtc: rv3028: ensure ram configuration registers are saved rtc: rv3028: factorize EERD bit handling rtc: rv3028: fix trickle resistor values rtc: rv3028: fix clock output support rtc: mt6397: Remove unused member dev rtc: rv8803: simplify the return expression of rv8803_nvram_write rtc: meson: simplify the return expression of meson_vrtc_probe rtc: rx8010: rename rx8010_init_client() to rx8010_init() rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally rtc: ds1307: consider aux-voltage-chargeable rtc: ds1307: store previous charge default per chip ... 2020-10-21T17:54:05Z Linus Torvalds torvalds@linux-foundation.org 2020-10-21T17:54:05Z urn:sha1:b5df4b5c28b232d1fc0b48660f44668faebb0bcb Pull i2c updates from Wolfram Sang: - if a host can be a client, too, the I2C core can now use it to emulate SMBus HostNotify support (STM32 and R-Car added this so far) - also for client mode, a testunit has been added. It can create rare situations on the bus, so host controllers can be tested - a binding has been added to mark the bus as "single-master". This allows for better timeout detections - new driver for Mellanox Bluefield - massive refactoring of the Tegra driver - EEPROMs recognized by the at24 driver can now have custom names - rest is driver updates * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits) Documentation: i2c: add testunit docs to index i2c: tegra: Improve driver module description i2c: tegra: Clean up whitespaces, newlines and indentation i2c: tegra: Clean up and improve comments i2c: tegra: Clean up printk messages i2c: tegra: Clean up variable names i2c: tegra: Improve formatting of variables i2c: tegra: Check errors for both positive and negative values i2c: tegra: Factor out hardware initialization into separate function i2c: tegra: Factor out register polling into separate function i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg() i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() i2c: tegra: Rename wait/poll functions i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg() i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear() i2c: tegra: Remove likely/unlikely from the code i2c: tegra: Remove outdated barrier() i2c: tegra: Clean up variable types i2c: tegra: Reorder location of functions in the code i2c: tegra: Clean up probe function ... 2020-10-21T14:58:43Z Bjorn Helgaas bhelgaas@google.com 2020-10-21T14:58:43Z urn:sha1:f95f023d11a04b4bac2a7f39e8dc0a3f54e75eb9 - Document R8A774A1, R8A774B1, R8A774E1 endpoint support in DT (Lad Prabhakar) - Add R8A774A1, R8A774B1, R8A774E1 (RZ/G2M, RZ/G2N, RZ/G2H) IDs to endpoint test (Lad Prabhakar) - Add device tree support for R8A7742 (Lad Prabhakar) - Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva) * remotes/lorenzo/pci/rcar: dt-bindings: PCI: rcar: Add device tree support for r8a7742 PCI: rcar-gen2: Use fallthrough pseudo-keyword misc: pci_endpoint_test: Add Device ID for RZ/G2H PCIe controller dt-bindings: pci: rcar-pci-ep: Document r8a774e1 misc: pci_endpoint_test: Add Device ID for RZ/G2M and RZ/G2N PCIe controllers dt-bindings: pci: rcar-pci-ep: Document r8a774a1 and r8a774b1 2020-10-21T14:58:39Z Bjorn Helgaas bhelgaas@google.com 2020-10-21T14:58:39Z urn:sha1:924bb1f9b014bec2d38ebe98d5ee37f448dac691 - Fix designware-ep Header Type check (Hou Zhiqiang) - Use DBI accessors instead of own config accessors (Rob Herring) - Allow overriding bridge pci_ops (Rob Herring) - Allow root and child buses to have different pci_ops (Rob Herring) - Add default dwc pci_ops.map_bus (Rob Herring) - Use pci_ops for root config space accessors in al, exynos, histb, keystone, kirin, meson, tegra (Rob Herring) - Remove dwc own/other config accessor ops (Rob Herring) - Use generic config accessors in dwc (Rob Herring) - Also call .add_bus() callback for root bus (Rob Herring) - Convert keystone .scan_bus() callback to use pci_ops.add_bus (Rob Herring) - Convert dwc to use pci_host_probe() (Rob Herring) - Remove dwc root_bus pointer (Rob Herring) - Remove storing of PCI resources in dwc-specific structs (Rob Herring) - Simplify config space handling (Rob Herring) - Drop keystone duplicated DT num-viewport handling (Rob Herring) - Check CONFIG_PCI_MSI in dw_pcie_msi_init() instead of duplicating it in all the drivers (Rob Herring) - Remove imx6 duplicate PCIE_LINK_WIDTH_SPEED_CONTROL definition (Rob Herring) - Add dwc num_lanes for use when it's lacking from DT (Rob Herring) - Ensure "Fast Link Mode" simulation environment setting is cleared (Rob Herring) - Drop meson duplicate number of lanes setup (Rob Herring) - Drop meson unnecessary RC config space init (Rob Herring) - Rework meson config and dwc port logic register accesses (Rob Herring) - Use common PCI register definitions in imx6 and qcom (Rob Herring) - Search for DesignWare PCIe Capability instead of hard-coding its location (Rob Herring) - Use common DesignWare register definitions in tegra (Rob Herring) - Drop keystone unused DBI2 code (Rob Herring) - Make dwc ATU accessors private (Rob Herring) - Centralize link gen setting in dwc (Rob Herring) - Set PORT_LINK_DLL_LINK_EN in common dwc setup code (Rob Herring) - Drop intel-gw unnecessary DT 'device_type' checking (Rob Herring) - Move intel-gw PCI_CAP_ID_EXP discovery to the single place it's used (Rob Herring) - Drop intel-gw unused max_width (Rob Herring) - Move N_FTS (fast training sequence) setup to common dwc setup (Rob Herring) - Convert spear13xx, tegra194 to use DBI accessors (Rob Herring) - Add multiple PFs support for DWC (Xiaowei Bao) - Add MSI-X doorbell mode for endpoint mode (Xiaowei Bao) - Update MSI/MSI-X capability management for endpoints (Xiaowei Bao) - Add layerscape ls1088a and ls2088a compatible strings (Xiaowei Bao) - Update layerscape MSI/MSI-X management (Xiaowei Bao) - Use doorbell to support MSI-X on layerscape (Xiaowei Bao) - Add layerscape endpoint mode support for ls1088a and ls2088a (Xiaowei Bao) - Add layerscape ls1088a node to DT (Xiaowei Bao) - Add Freescale/Layerscape ls1088a to endpoint test (Xiaowei Bao) - Add endpoint test driver data for Layerscape PCIe controllers (Hou Zhiqiang) - Fix 'cast truncates bits from constant value' warning (Gustavo Pimentel) - Add uniphier iATU register description (Kunihiko Hayashi) - Add common iATU register support (Kunihiko Hayashi) - Remove keystone iATU register mapping in favor of generic dwc support (Kunihiko Hayashi) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Fix MSI page leakage in suspend/resume (Jisheng Zhang) - Check whether link is up before attempting config access (best-effort fix even though it's racy) (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI: dwc: Fix MSI page leakage in suspend/resume PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled PCI: keystone: Remove iATU register mapping PCI: dwc: Add common iATU register support dt-bindings: PCI: uniphier-ep: Add iATU register description dt-bindings: PCI: uniphier: Add iATU register description PCI: dwc: Fix 'cast truncates bits from constant value' misc: pci_endpoint_test: Add driver data for Layerscape PCIe controllers misc: pci_endpoint_test: Add LS1088a in pci_device_id table PCI: layerscape: Add EP mode support for ls1088a and ls2088a PCI: layerscape: Modify the MSIX to the doorbell mode PCI: layerscape: Modify the way of getting capability with different PEX PCI: layerscape: Fix some format issue of the code dt-bindings: pci: layerscape-pci: Add compatible strings for ls1088a and ls2088a PCI: designware-ep: Modify MSI and MSIX CAP way of finding PCI: designware-ep: Move the function of getting MSI capability forward PCI: designware-ep: Add the doorbell mode of MSI-X in EP mode PCI: designware-ep: Add multiple PFs support for DWC PCI: dwc: Use DBI accessors PCI: dwc: Move N_FTS setup to common setup PCI: dwc/intel-gw: Drop unused max_width PCI: dwc/intel-gw: Move getting PCI_CAP_ID_EXP offset to intel_pcie_link_setup() PCI: dwc/intel-gw: Drop unnecessary checking of DT 'device_type' property PCI: dwc: Set PORT_LINK_DLL_LINK_EN in common setup code PCI: dwc: Centralize link gen setting PCI: dwc: Make ATU accessors private PCI: dwc: Remove read_dbi2 code PCI: dwc/tegra: Use common Designware port logic register definitions PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offset PCI: dwc/qcom: Use common PCI register definitions PCI: dwc/imx6: Use common PCI register definitions PCI: dwc/meson: Rework PCI config and DW port logic register accesses PCI: dwc/meson: Drop unnecessary RC config space initialization PCI: dwc/meson: Drop the duplicate number of lanes setup PCI: dwc: Ensure FAST_LINK_MODE is cleared PCI: dwc: Add a 'num_lanes' field to struct dw_pcie PCI: dwc/imx6: Remove duplicate define PCIE_LINK_WIDTH_SPEED_CONTROL PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init() PCI: dwc/keystone: Drop duplicated 'num-viewport' PCI: dwc: Simplify config space handling PCI: dwc: Remove storing of PCI resources PCI: dwc: Remove root_bus pointer PCI: dwc: Convert to use pci_host_probe() PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus PCI: Also call .add_bus() callback for root bus PCI: dwc: Use generic config accessors PCI: dwc: Remove dwc specific config accessor ops PCI: dwc: histb: Use pci_ops for root config space accessors PCI: dwc: exynos: Use pci_ops for root config space accessors PCI: dwc: kirin: Use pci_ops for root config space accessors PCI: dwc: meson: Use pci_ops for root config space accessors PCI: dwc: tegra: Use pci_ops for root config space accessors PCI: dwc: keystone: Use pci_ops for config space accessors PCI: dwc: al: Use pci_ops for child config space accessors PCI: dwc: Add a default pci_ops.map_bus for root port PCI: dwc: Allow overriding bridge pci_ops PCI: dwc: Use DBI accessors instead of own config accessors PCI: Allow root and child buses to have different pci_ops PCI: designware-ep: Fix the Header Type check