wireguard-linux/Documentation/devicetree/bindings, branch stable

Merge tag 'pinctrl-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2026-09-24T13:19:09Z

Pull pin control fixes from Linus Walleij: - Serialize the calls to pinctrl_generic_dt_nod_to_map() - Fix a typo in S4 group in the Meson driver - Fix bank width and regmap usage in the MPFS-SSIO driver - Data register output latch behavior and voltage encoding fixes in the Sunxi driver - Free the IRQ domain on the error path in the single driver - Fix some QUP1 SE2/SE3 groups and a missing OF module alias in the Qualcomm drivers - Fix up the register banks for AON (I guess always-on) pins in the Tegra238 driver * tag 'pinctrl-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: tegra238: Fix register bank for AON pin groups pinctrl: qcom: ipq5210: Publish the OF module alias pinctrl: qcom: nord: Split QUP1 SE2/SE3 into lane-pair functions pinctrl: single: free the IRQ on domain creation failure pinctrl: sunxi: A523: fix voltage withstand encoding pinctrl: sunxi: keep a shadow copy of the data register output latches pinctrl: mpfs-mssio: use correct regmap function to set bank voltage pinctrl: mpfs-mssio: fix width of unused bank voltage setting pinctrl: generic: serialise pinctrl_generic_dt_node_to_map() pinctrl: meson: Fix typo in s4 group name

Merge tag 'input-for-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2026-09-20T14:02:34Z

Pull input fixes from Dmitry Torokhov: - Fixes for evdev and input compat handling to zero-initialize on-stack absinfo and force-feedback effect structures before partial or compat copies from userspace, preventing kernel stack memory disclosure - Fixes for the Synaptics RMI4 driver to prevent an out-of-bounds read when writing multi-chunk blocks over SMBus and to avoid a NULL pointer dereference during suspend/resume when the RMI device is unbound - Fixes for the soc_button_array driver to propagate -EPROBE_DEFER on non-Bay Trail/Cherry Trail platforms (fixing broken power and volume buttons on the Microsoft Surface Pro 11) and to validate the ACPI package element count before dereferencing - A fix for the adp5588-keys driver to cache the initial GPIO hardware state before registering the gpiochip so pre-configured pin states are not clobbered by GPIO hogs during registration - A fix for the cyttsp5 touchscreen driver to clamp the device-supplied HID report size before copying into the response buffer, preventing a buffer overflow - A fix for the HP SDC serio driver to use timer_shutdown_sync() on module exit so the periodic kicker timer cannot rearm itself during teardown - A fix for the eeti_ts touchscreen driver to export its OF module alias so the module autoloads on Device Tree platforms - Updates to the xpad joystick driver adding support for the Victrix Pro BFG controller and Azeron devices, and fixing the device type classification for the PDP Marvel Xbox 360 controller - Quirks for the i8042 and atkbd drivers to keep the built-in keyboards functional on the Acer Aspire Go 15 AG15-42P and Xiaomi Redmi Book Pro 16 2026 - A quirk for the Synaptics PS/2 touchpad driver disabling SMBus InterTouch on the Lenovo ThinkPad T440p (board ID 2722) so the touchpad and TrackPoint respond immediately at boot - Other minor updates and documentation fixes, including reading the "ti,poll-period" property as u32 in tsc2007, adding the mt6572 compatible to the MediaTek keypad Device Tree binding, fixing an attribute name typo in the trackpoint sysfs ABI documentation, and documenting that no new LED codes should be added to the input subsystem * tag 'input-for-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: hp_sdc - shut down kicker timer on module exit Input: xpad - add support for Victrix Pro BFG Controller Input: tsc2007 - read "ti,poll-period" as u32 Input: trackpoint - fix the inertia attribute name in the ABI document Input: eeti_ts - publish the OF module alias Input: xpad - add support for Azeron devices Input: xpad - fix PDP Marvel Xbox 360 controller Input: document that no new LED codes should be added Input: soc_button_array - check btns_desc->package.count Input: soc_button_array - fix MS Surface Pro 11 probe failure Input: i8042 - add quirk for Acer Aspire Go 15 AG15-42P Input: synaptics - disable InterTouch on ThinkPad T440p (board id 2722) Input: cyttsp5 - clamp the HID report size before memcpy Input: zero ff_effect before compat copy in input_ff_effect_from_user Input: evdev - zero absinfo before partial copy in EVIOCSABS Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block() Input: atkbd - skip deactivate for Xiaomi Redmi Book Pro 16 2026 dt-bindings: input: mediatek,mt6779-keypad: add mt6572 Input: adp5588-keys - cache GPIO state before registering the gpiochip

pinctrl: qcom: nord: Split QUP1 SE2/SE3 into lane-pair functions

2026-09-18T17:00:14Z

QUP1 SE2 and SE3 pack all four of their lanes pair-wise onto only two pins each: lanes 0/1 (I2C SDA/SCL) at mux value 2 and lanes 2/3 (UART TX/RX) at mux value 1, on gpio127/gpio128 and gpio129/gpio130 respectively. Both mux values were named "qup1_se2" (respectively "qup1_se3"), so the two distinct lane pairs became indistinguishable. msm_pinmux_set_mux() stops at the first entry matching the requested function, which means mux value 1 was always selected and the I2C lanes could never be muxed out. In practice i2c9 and i2c10 got the UART lanes and did not work, while uart9 and uart10 happened to be muxed correctly. Give each lane pair its own function, following the _01/_23 naming already used for the same hardware arrangement by the shikra, eliza, hawi and maili TLMM drivers. Both functions still cover the full pin pair, so a single pinctrl state per protocol remains sufficient. Drop gpio129/gpio130 from the SE2 group list, since those pins belong to SE3 and were never reachable through the SE2 function. Also rename QUP1 SE2/SE3 functions in the binding doc accordingly. While at it, add missing "gpio", "qup3_se0_mira" and "qup3_se0_mirb" to the binding function enum to get the list complete. Fixes: c24dd0826f06 ("pinctrl: qcom: add the TLMM driver for the Nord platforms") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Shawn Guo Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260830030201.135637-1-shengchao.guo@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Linus Walleij

Merge tag 'drm-msm-fixes-2026-09-16' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

2026-09-17T09:05:21Z

Fixes for v7.3-rc4: DT: - Corrected indentation Core: - Marked fbdev as system memory GPU: - Fixed autosuspend cleanup on teardown - a750: fix timestamps - Increase GMU fw init timeout - Misc fixes/cleanups DPU: - Fixed clock rounding, unbreaking newest platforms - Cleared pending flush state DP: - Skip PUSH_IDLE when link was never enabled - Fixed bandwidth checks HDMI: - Fixed runtime PM cleanup on probe failure Signed-off-by: Dave Airlie From: Rob Clark Link: https://patch.msgid.link/CACSVV021rZsjmiPEyR_LR7L=k7=DRV0QdsA50BF_Gd0s2DXaCw@mail.gmail.com

dt-bindings: display/msm: Use consistent indentation in the example

2026-09-14T23:09:28Z

Correct indentation in the examples to consistent 2- or 4-spaces indentation to fix dt-check-style warnings ("example 0 [indent-consistent] indent mismatch ..."). Preferred is 4-spaces, but re-indenting entire example just for that is too much churn. Signed-off-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/753054/ Link: https://lore.kernel.org/r/20260913123331.100293-4-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov

Merge tag 'regulator-fix-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2026-09-11T22:24:21Z

Pull regulator fixes from Mark Brown: "One fix for pf1550 which checked for errors on multiple regulators but always notified via one of them regardless of which one had the problem, plus one device ID addition in the fan53555 DT bindings" * tag 'regulator-fix-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: pf1550: fix which regulator is notified regulator: dt-bindings: fan53555: add tcs,tcs4526

Merge tag 'spi-fix-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2026-09-11T22:10:31Z

Pull spi fix from Mark Brown: "New device ID for v7.3: update the DesignWare DT binding to say how to describe the UltraRISC DP1000 instance of the controller" * tag 'spi-fix-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: dt-bindings: snps,dw-apb-ssi: Add compatible for UltraRISC DP1000 SoC

spi: dt-bindings: snps,dw-apb-ssi: Add compatible for UltraRISC DP1000 SoC

2026-09-08T15:23:17Z

Add the SoC-specific compatible string and use the generic one as fallback for the UltraRISC DP1000 SPI controller. The DP1000 integrates two SPI controllers. SPI0 supports standard, dual and quad transfers with three native chip-select signals. SPI1 supports standard transfers with four native chip-select signals. Both controllers have one register range and separate reference and APB interface clocks. Signed-off-by: Jia Wang Acked-by: Conor Dooley Link: https://patch.msgid.link/20260907-ultrarisc-dts-v2-5-5eb4c97477c5@ultrarisc.com Signed-off-by: Mark Brown

dt-bindings: riscv: cpus: Fix yamllint style issues

2026-09-02T01:20:18Z

Wrap an overlong description line and normalize the inline dependency lists to satisfy yamllint. Signed-off-by: Jia Wang Acked-by: Conor Dooley Link: https://patch.msgid.link/20260824-ultrarisc-dts-v1-1-61ab7aebe9e5@ultrarisc.com Signed-off-by: Paul Walmsley

regulator: dt-bindings: fan53555: add tcs,tcs4526

2026-08-31T21:56:42Z

The driver has accepted tcs,tcs4526 since commit 5eee5eced95f ("regulator: fan53555: add tcs4526"), which added the compatible to both the of_device_id and i2c_device_id tables for the TCS4526, a chip that reports id 0 rather than the TCS4525's id 12. The binding was converted to DT schema afterwards, in commit 6cea468b680e ("regulator: dt-bindings: Convert Fairchild FAN53555 to DT schema"), and only picked up tcs,tcs4525. No in-tree DTS used the 4526 string at the time, so nothing flagged the omission. RK3399Pro boards use the TCS4526 for vdd_gpu and vdd_cpu_b, so a DTS describing them fails dtbs_check today even though the driver binds correctly. Add the missing compatible. Signed-off-by: Rudi Heitbaum Acked-by: Conor Dooley Link: https://patch.msgid.link/aousEdwMni9ScZBn@0d3a7a881997 Signed-off-by: Mark Brown