wireguard-linux/arch/arm/Kconfig, branch jd/orphan-parallel

Merge branch 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2020-10-22T16:59:21Z

Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode

Merge branch 'akpm' (patches from Andrew)

2020-10-14T16:57:24Z

Merge misc updates from Andrew Morton: "181 patches. Subsystems affected by this patch series: kbuild, scripts, ntfs, ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise, gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma, memory-failure, vmallo and migration)" * emailed patches from Andrew Morton : (181 commits) mm/migrate: remove obsolete comment about device public mm/migrate: remove cpages-- in migrate_vma_finalize() mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary memblock: use separate iterators for memory and reserved regions memblock: implement for_each_reserved_mem_region() using __next_mem_region() memblock: remove unused memblock_mem_size() x86/setup: simplify reserve_crashkernel() x86/setup: simplify initrd relocation and reservation arch, drivers: replace for_each_membock() with for_each_mem_range() arch, mm: replace for_each_memblock() with for_each_mem_pfn_range() memblock: reduce number of parameters in for_each_mem_range() memblock: make memblock_debug and related functionality private memblock: make for_each_memblock_type() iterator private mircoblaze: drop unneeded NUMA and sparsemem initializations riscv: drop unneeded node initialization h8300, nds32, openrisc: simplify detection of memory extents arm64: numa: simplify dummy_numa_init() arm, xtensa: simplify initialization of high memory pages dma-contiguous: simplify cma_early_percent_memory() KVM: PPC: Book3S HV: simplify kvm_cma_reserve() ...

Partially revert "ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer"

2020-10-14T01:38:26Z

This partially reverts commit b0fe66cf095016e0b238374c10ae366e1f087d11. The minimum supported version of clang is now clang 10.0.1. We still want to pass -meabi=gnu. Suggested-by: Nathan Chancellor Signed-off-by: Nick Desaulniers Signed-off-by: Andrew Morton Reviewed-by: Kees Cook Reviewed-by: Nathan Chancellor Cc: Andrey Konovalov Cc: Fangrui Song Cc: Marco Elver Cc: Miguel Ojeda Cc: Sedat Dilek Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: Masahiro Yamada Cc: Vincenzo Frascino Cc: Will Deacon Link: https://lkml.kernel.org/r/20200902225911.209899-6-ndesaulniers@google.com Signed-off-by: Linus Torvalds

Merge tag 'seccomp-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2020-10-13T23:33:43Z

Pull seccomp updates from Kees Cook: "The bulk of the changes are with the seccomp selftests to accommodate some powerpc-specific behavioral characteristics. Additional cleanups, fixes, and improvements are also included: - heavily refactor seccomp selftests (and clone3 selftests dependency) to fix powerpc (Kees Cook, Thadeu Lima de Souza Cascardo) - fix style issue in selftests (Zou Wei) - upgrade "unknown action" from KILL_THREAD to KILL_PROCESS (Rich Felker) - replace task_pt_regs(current) with current_pt_regs() (Denis Efremov) - fix corner-case race in USER_NOTIF (Jann Horn) - make CONFIG_SECCOMP no longer per-arch (YiFei Zhu)" * tag 'seccomp-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits) seccomp: Make duplicate listener detection non-racy seccomp: Move config option SECCOMP to arch/Kconfig selftests/clone3: Avoid OS-defined clone_args selftests/seccomp: powerpc: Set syscall return during ptrace syscall exit selftests/seccomp: Allow syscall nr and ret value to be set separately selftests/seccomp: Record syscall during ptrace entry selftests/seccomp: powerpc: Fix seccomp return value testing selftests/seccomp: Remove SYSCALL_NUM_RET_SHARE_REG in favor of SYSCALL_RET_SET selftests/seccomp: Avoid redundant register flushes selftests/seccomp: Convert REGSET calls into ARCH_GETREG/ARCH_SETREG selftests/seccomp: Convert HAVE_GETREG into ARCH_GETREG/ARCH_SETREG selftests/seccomp: Remove syscall setting #ifdefs selftests/seccomp: mips: Remove O32-specific macro selftests/seccomp: arm64: Define SYSCALL_NUM_SET macro selftests/seccomp: arm: Define SYSCALL_NUM_SET macro selftests/seccomp: mips: Define SYSCALL_NUM_SET macro selftests/seccomp: Provide generic syscall setting macro selftests/seccomp: Refactor arch register macros to avoid xtensa special case selftests/seccomp: Use __NR_mknodat instead of __NR_mknod selftests/seccomp: Use bitwise instead of arithmetic operator for flags ...

seccomp: Move config option SECCOMP to arch/Kconfig

2020-10-08T20:17:47Z

In order to make adding configurable features into seccomp easier, it's better to have the options at one single location, considering especially that the bulk of seccomp code is arch-independent. An quick look also show that many SECCOMP descriptions are outdated; they talk about /proc rather than prctl. As a result of moving the config option and keeping it default on, architectures arm, arm64, csky, riscv, sh, and xtensa did not have SECCOMP on by default prior to this and SECCOMP will be default in this change. Architectures microblaze, mips, powerpc, s390, sh, and sparc have an outdated depend on PROC_FS and this dependency is removed in this change. Suggested-by: Jann Horn Link: https://lore.kernel.org/lkml/CAG48ez1YWz9cnp08UZgeieYRhHdqh-ch7aNwc4JRBnGyrmgfMg@mail.gmail.com/ Signed-off-by: YiFei Zhu [kees: added HAVE_ARCH_SECCOMP help text, tweaked wording] Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/9ede6ef35c847e58d61e476c6a39540520066613.1600951211.git.yifeifz2@illinois.edu

ARM: Allow IPIs to be handled as normal interrupts

2020-09-13T16:05:39Z

In order to deal with IPIs as normal interrupts, let's add a new way to register them with the architecture code. set_smp_ipi_range() takes a range of interrupts, and allows the arch code to request them as if the were normal interrupts. A standard handler is then called by the core IRQ code to deal with the IPI. This means that we don't need to call irq_enter/irq_exit, and that we don't need to deal with set_irq_regs either. So let's move the dispatcher into its own function, and leave handle_IPI() as a compatibility function. On the sending side, let's make use of ipi_send_mask, which already exists for this purpose. One of the major difference is that we end up, in some cases (such as when performing IRQ time accounting on the scheduler IPI), end up with nested irq_enter()/irq_exit() pairs. Other than the (relatively small) overhead, there should be no consequences to it (these pairs are designed to nest correctly, and the accounting shouldn't be off). Reviewed-by: Valentin Schneider Signed-off-by: Marc Zyngier

uaccess: add infrastructure for kernel builds with set_fs()

2020-09-09T02:21:32Z

Add a CONFIG_SET_FS option that is selected by architecturess that implement set_fs, which is all of them initially. If the option is not set stubs for routines related to overriding the address space are provided so that architectures can start to opt out of providing set_fs. Signed-off-by: Christoph Hellwig Reviewed-by: Kees Cook Signed-off-by: Al Viro

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2020-08-06T17:17:00Z

Pull ARM updates from Russell King: - add arch/arm/Kbuild from Masahiro Yamada. - simplify act_mm macro, since it contains an open-coded get_thread_info. - VFP updates for Clang from Stefan Agner. - Fix unwinder for Clang from Nathan Huckleberry. - Remove unused it8152 PCI host controller, used by the removed cm-x2xx platforms from Mike Rapoport. - Further explanation of __range_ok(). - Remove kimage_voffset that isn't used anymore from Marc Zyngier. - Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel. - Documentation cleanup for mach-* from Pete Zaitcev. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8996/1: Documentation/Clean up the description of mach- ARM: 8995/1: drop Thumb-2 workaround for ancient binutils ARM: 8994/1: mm: drop kimage_voffset which was only used by KVM ARM: uaccess: add further explanation of __range_ok() ARM: 8993/1: remove it8152 PCI controller driver ARM: 8992/1: Fix unwind_frame for clang-built kernels ARM: 8991/1: use VFP assembler mnemonics if available ARM: 8990/1: use VFP assembler mnemonics in register load/store macros ARM: 8989/1: use .fpu assembler directives instead of assembler arguments ARM: 8982/1: mm: Simplify act_mm macro ARM: 8981/1: add arch/arm/Kbuild

Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping

2020-08-05T00:29:57Z

Pull dma-mapping updates from Christoph Hellwig: - make support for dma_ops optional - move more code out of line - add generic support for a dma_ops bypass mode - misc cleanups * tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping: dma-contiguous: cleanup dma_alloc_contiguous dma-debug: use named initializers for dir2name powerpc: use the generic dma_ops_bypass mode dma-mapping: add a dma_ops_bypass flag to struct device dma-mapping: make support for dma ops optional dma-mapping: inline the fast path dma-direct calls dma-mapping: move the remaining DMA API calls out of line

Merge tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

2020-08-04T21:47:45Z

Pull fork cleanups from Christian Brauner: "This is cleanup series from when we reworked a chunk of the process creation paths in the kernel and switched to struct {kernel_}clone_args. High-level this does two main things: - Remove the double export of both do_fork() and _do_fork() where do_fork() used the incosistent legacy clone calling convention. Now we only export _do_fork() which is based on struct kernel_clone_args. - Remove the copy_thread_tls()/copy_thread() split making the architecture specific HAVE_COYP_THREAD_TLS config option obsolete. This switches all remaining architectures to select HAVE_COPY_THREAD_TLS and thus to the copy_thread_tls() calling convention. The current split makes the process creation codepaths more convoluted than they need to be. Each architecture has their own copy_thread() function unless it selects HAVE_COPY_THREAD_TLS then it has a copy_thread_tls() function. The split is not needed anymore nowadays, all architectures support CLONE_SETTLS but quite a few of them never bothered to select HAVE_COPY_THREAD_TLS and instead simply continued to use copy_thread() and use the old calling convention. Removing this split cleans up the process creation codepaths and paves the way for implementing clone3() on such architectures since it requires the copy_thread_tls() calling convention. After having made each architectures support copy_thread_tls() this series simply renames that function back to copy_thread(). It also switches all architectures that call do_fork() directly over to _do_fork() and the struct kernel_clone_args calling convention. This is a corollary of switching the architectures that did not yet support it over to copy_thread_tls() since do_fork() is conditional on not supporting copy_thread_tls() (Mostly because it lacks a separate argument for tls which is trivial to fix but there's no need for this function to exist.). The do_fork() removal is in itself already useful as it allows to to remove the export of both do_fork() and _do_fork() we currently have in favor of only _do_fork(). This has already been discussed back when we added clone3(). The legacy clone() calling convention is - as is probably well-known - somewhat odd: # # ABI hall of shame # config CLONE_BACKWARDS config CLONE_BACKWARDS2 config CLONE_BACKWARDS3 that is aggravated by the fact that some architectures such as sparc follow the CLONE_BACKWARDSx calling convention but don't really select the corresponding config option since they call do_fork() directly. So do_fork() enforces a somewhat arbitrary calling convention in the first place that doesn't really help the individual architectures that deviate from it. They can thus simply be switched to _do_fork() enforcing a single calling convention. (I really hope that any new architectures will __not__ try to implement their own calling conventions...) Most architectures already have made a similar switch (m68k comes to mind). Overall this removes more code than it adds even with a good portion of added comments. It simplifies a chunk of arch specific assembly either by moving the code into C or by simply rewriting the assembly. Architectures that have been touched in non-trivial ways have all been actually boot and stress tested: sparc and ia64 have been tested with Debian 9 images. They are the two architectures which have been touched the most. All non-trivial changes to architectures have seen acks from the relevant maintainers. nios2 with a custom built buildroot image. h8300 I couldn't get something bootable to test on but the changes have been fairly automatic and I'm sure we'll hear people yell if I broke something there. All other architectures that have been touched in trivial ways have been compile tested for each single patch of the series via git rebase -x "make ..." v5.8-rc2. arm{64} and x86{_64} have been boot tested even though they have just been trivially touched (removal of the HAVE_COPY_THREAD_TLS macro from their Kconfig) because well they are basically "core architectures" and since it is trivial to get your hands on a useable image" * tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: arch: rename copy_thread_tls() back to copy_thread() arch: remove HAVE_COPY_THREAD_TLS unicore: switch to copy_thread_tls() sh: switch to copy_thread_tls() nds32: switch to copy_thread_tls() microblaze: switch to copy_thread_tls() hexagon: switch to copy_thread_tls() c6x: switch to copy_thread_tls() alpha: switch to copy_thread_tls() fork: remove do_fork() h8300: select HAVE_COPY_THREAD_TLS, switch to kernel_clone_args nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args sparc: unconditionally enable HAVE_COPY_THREAD_TLS sparc: share process creation helpers between sparc and sparc64 sparc64: enable HAVE_COPY_THREAD_TLS fork: fold legacy_clone_args_valid() into _do_fork()