wireguard-linux/arch/arm/boot/dts/Makefile, branch jd/orphan-parallel

Merge tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-08-04T02:38:30Z

Pull new ARM SoC support from Arnd Bergmann: "There are three SoC families newly dded to the 32-bit and 64-bit Arm architecture code in the kernel this time: - Daniel Palmer adds initial support for two chips made by MStar, a taiwanese SoC manufacturer that became part of Mediatek in 2012. For now, the added support is fairly minimal, with just two of its Cortex-A7 based 32-bit camera chips getting support for a limited set of on-chip peripherals. - Lars Povlsen from Microchip adds support for their new Sparx5 family of ethernet switch chips using 64-bit Cortex-A53 cores. These are descended from earlier VSC7xxx SparX and Ocelot chips using 32-bit MIPS cores. - Daniele Alessandrelli from Intel adds support for the new Keem Bay SoC for computer vision, built around a Movidius VPU with Linux running on Arm Cortex-A53 cores" * tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: mstar: Correct the compatible string for pmsleep dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep ARM: mstar: Add reboot support ARM: mstar: Add "pmsleep" node to base dtsi ARM: mstar: Add PMU ARM: mstar: Adjust IMI size for infinity3 ARM: mstar: Adjust IMI size for mercury5 ARM: mstar: Adjust IMI size of infinity ARM: mstar: Add IMI SRAM region dt-bindings: arm: mstar: Move existing MStar binding descriptions dt-bindings: arm: mstar: Add binding details for mstar, pmsleep ARM: mstar: Fix dts filename for 70mai midrive d08 ARM: mstar: Add dts for 70mai midrive d08 ARM: mstar: Add dts for msc313(e) based BreadBee boards ARM: mstar: Add mercury5 series dtsis ARM: mstar: Add infinity/infinity3 family dtsis ARM: mstar: Add Armv7 base dtsi ARM: mstar: Add binding details for mstar,l3bridge ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs ...

ARM: mstar: Fix dts filename for 70mai midrive d08

2020-07-28T09:13:50Z

Fixes the filename for the 70mai midrive d08 dts. Signed-off-by: Daniel Palmer Signed-off-by: Arnd Bergmann

ARM: mstar: Add dts for 70mai midrive d08

2020-07-28T09:13:50Z

Adds initial support for the 70mai midrive d08 dash camera. Signed-off-by: Daniel Palmer Signed-off-by: Arnd Bergmann

ARM: mstar: Add dts for msc313(e) based BreadBee boards

2020-07-28T09:13:50Z

BreadBee is an opensource development board based on the MStar msc313(e) SoC. Hardware details, schematics and so on can be found at: https://github.com/breadbee/breadbee Signed-off-by: Daniel Palmer Signed-off-by: Arnd Bergmann

Merge tag 'aspeed-5.9-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

2020-07-28T07:10:03Z

ASPEED device tree updates for 5.9 There is one new machine; AMD's EthanolX reference platform with an AST2600 BMC. Misc updates for Rainier, Tacoma, Wedge and Mihawk machines. * tag 'aspeed-5.9-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (26 commits) ARM: dts: Aspeed: tacoma: Enable EHCI controller ARM: dts: aspeed: rainier: Enable EHCI controller ARM: dts: aspeed: rainier: Switch OCCs to P10 ARM: dts: aspeed: rainier: Add FSI I2C masters ARM: dts: aspeed: rainier: Add CFAM SPI controllers ARM: dts: aspeed: rainier: Add I2C buses for NVMe use ARM: dts: aspeed: Initial device tree for AMD EthanolX ARM: dts: rainier: Describe GPIO mux on I2C3 ARM: dts: aspeed: wedge40: Enable pwm_tacho device ARM: dts: aspeed: wedge40: Enable ADC device ARM: dts: aspeed: wedge40: Disable unused i2c controllers ARM: dts: aspeed: cmm: Fixup I2C tree ARM: dts: aspeed: tacoma: Add CFAM reset GPIO ARM: dts: aspeed: rainier: Add CFAM reset GPIO ARM: dts: aspeed: tacoma: Fix gpio-key definitions ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP ARM: dts: aspeed: rainier: Add second cfam on the hub ARM: dts: aspeed: rainier: Add line-name checkstop ARM: dts: aspeed: tacoma: Remove checkstop gpio-key ARM: dts: aspeed: tacoma: Enable XDMA engine ... Link: https://lore.kernel.org/r/CACPK8Xf_Np7LtcDFhywi6Uk1EgUpb0pVVa+Lr9YEwBRjbjOKCQ@mail.gmail.com Signed-off-by: Arnd Bergmann

ARM: dts: aspeed: Initial device tree for AMD EthanolX

2020-07-27T23:32:14Z

Initial introduction of AMD EthanolX platform equipped with an Aspeed ast2500 BMC manufactured by AMD. AMD EthanolX platform is an AMD customer reference board with an Aspeed ast2500 BMC manufactured by AMD. This adds AMD EthanolX device tree file including the flash layout used by EthanolX BMC machines. Signed-off-by: Supreeth Venkatesh Signed-off-by: Joel Stanley

Merge tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

2020-07-23T12:02:54Z

Biggest part is the addition of the rk3288 variant of the VMARC SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes with it as the underlying Dalang carrier board is shared by both an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10). Other than that rk3288 gets its ohci node added that only works on the fixed rk3288w variant of the soc and some asorted fixes and improvements for dt-binding-check. * tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add PCIe for RockPI N10 ARM: dts: rockchip: Add HDMI out for RockPI N8/N10 ARM: dts: rockchip: Add USB for RockPI N8/N10 ARM: dts: rockchip: Add usb host0 ohci node for rk3288 ARM: dts: rockchip: Fix VBUS on rk3288-vyasa ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support ARM: dts: rockchip: Add VMARC RK3288 SOM initial support dt-bindings: arm: rockchip: Add Rock Pi N8 binding arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier arm64: dts: rk3399pro: vmarc-som: Move supply regulators into Carrier arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, properties ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOM ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac ARM: dts: rockchip: Add marvell BT irq config ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio Link: https://lore.kernel.org/r/2472314.kD9Egx1jfM@phil Signed-off-by: Arnd Bergmann

Merge tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

2020-07-22T19:58:17Z

Qualcomm ARM dts updates for v5.9 Add QFPROM and ethernet for ipq8064 and a new DTS for the MikroTik RB3011 using the same platform. * tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add qfprom definition to ipq806x ARM: dts: qcom: Add MikroTik RB3011 ARM: dts: qcom: add ethernet definitions to ipq8064 Link: https://lore.kernel.org/r/20200721045032.3430395-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann

Merge tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

2020-07-22T19:46:22Z

i.MX device tree update for 5.9: - New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC. - Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings. - Make tempmon node as child of anatop node according to hardware architecture. - The vf610-zii device update: configure fiber port to 1000BaseX, add switch watchdog, MDIO speed and preamble. - A series from Fabio Estevam to update imx6qdl-sabresd and imx6q-tbs2910 for using MDIO node and reset-assert-us. - Align L2 cache-controller device node name with .yaml schema. - Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board. - A series of patches from Shengjiu Wang to enable various audio support on i.MX6 devices. - Add Gateworks System Controller support for imx6qdl-gw devices. - Change default #pwm-cells setting to <3> in the SoC dtsi files. - Other small random changes. * tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits) ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties ARM: dts: imx6q-tbs2910: Pass reset-assert-us ARM: dts: imx6q-tbs2910: Add an mdio node ARM: dts: imx6qdl-sabresd: Pass reset-assert-us ARM: dts: imx6qdl-sabresd: Add an mdio node ARM: dts: imx6qdl-gw: add Gateworks System Controller support ARM: dts: imx6ull: add MYiR MYS-6ULX SBC ARM: dts: vf610-zii-spb4: Add node for switch watchdog ARM: dts: colibri-imx6: remove pinctrl-names orphan ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX ARM: dts: ZII: update MDIO speed and preamble ARM: dts: vfxxx: Add node for CAAM ARM: dts: imx6qp-sabresd: enable sata ARM: dts: imx6qp-sabreauto: enable sata ARM: dts: add Protonic RVT board ARM: dts: add Protonic VT7 board ARM: dts: add Protonic WD2 board ... Link: https://lore.kernel.org/r/20200720085536.24138-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann

ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support

2020-07-18T15:06:13Z

Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20200715083418.112003-8-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner