WireGuard for the Linux kernel https://git.zx2c4.com/wireguard-linux/atom/arch/arm/boot/dts?h=jd%2Forphan-parallel 2020-10-23T17:54:13Z 2020-10-23T17:54:13Z Linus Torvalds torvalds@linux-foundation.org 2020-10-23T17:54:13Z urn:sha1:090a7d046fedaaaf41fcdd84ca11764fa5d35233 Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code 2020-10-15T16:51:18Z Linus Torvalds torvalds@linux-foundation.org 2020-10-15T16:51:18Z urn:sha1:c6dbef7307629cce855aa6b482b60cbf7777ed88 Pull USB/PHY/Thunderbolt driver updates from Greg KH: "Here is the big set of USB, PHY, and Thunderbolt driver updates for 5.10-rc1. Lots of tiny different things for these subsystems are in here, including: - phy driver updates - thunderbolt / USB 4 updates and additions - USB gadget driver updates - xhci fixes and updates - typec driver additions and updates - api conversions to various drivers for core kernel api changes - new USB control message functions to make it harder to get wrong, as found by syzbot (took 2 tries to get it right) - lots of tiny USB driver fixes and updates all over the place All of these have been in linux-next for a while, with the exception of the last "obviously correct" patch that updated a FALLTHROUGH comment that got merged last weekend" * tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits) usb: musb: gadget: Use fallthrough pseudo-keyword usb: typec: Add QCOM PMIC typec detection driver USB: serial: option: add Cellient MPL200 card usb: typec: tcpci_maxim: Add support for Sink FRS usb: typec: tcpci: Implement callbacks for FRS usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) usb: typec: tcpci_maxim: Chip level TCPC driver usb: typec: tcpci: Add set_vbus tcpci callback usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled usb: cdc-acm: add quirk to blacklist ETAS ES58X devices USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: core: remove polling for /sys/kernel/debug/usb/devices usb: typec: add support for STUSB160x Type-C controller family usb: typec: add typec_find_pwr_opmode usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema usb: dwc2: Fix INTR OUT transfers in DDMA mode. ... 2020-10-14T19:08:34Z Linus Torvalds torvalds@linux-foundation.org 2020-10-14T19:08:34Z urn:sha1:531d29b0b674036347a04c08c0898ff1aa522180 Pull iommu updates from Joerg Roedel: - ARM-SMMU Updates from Will: - Continued SVM enablement, where page-table is shared with CPU - Groundwork to support integrated SMMU with Adreno GPU - Allow disabling of MSI-based polling on the kernel command-line - Minor driver fixes and cleanups (octal permissions, error messages, ...) - Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when a device tries DMA on memory owned by a guest. This needs new fault-types as well as a rewrite of the IOMMU memory semaphore for command completions. - Allow broken Intel IOMMUs (wrong address widths reported) to still be used for interrupt remapping. - IOMMU UAPI updates for supporting vSVA, where the IOMMU can access address spaces of processes running in a VM. - Support for the MT8167 IOMMU in the Mediatek IOMMU driver. - Device-tree updates for the Renesas driver to support r8a7742. - Several smaller fixes and cleanups all over the place. * tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits) iommu/vt-d: Gracefully handle DMAR units with no supported address widths iommu/vt-d: Check UAPI data processed by IOMMU core iommu/uapi: Handle data and argsz filled by users iommu/uapi: Rename uapi functions iommu/uapi: Use named union for user data iommu/uapi: Add argsz for user filled data docs: IOMMU user API iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate() iommu/arm-smmu-v3: Add SVA device feature iommu/arm-smmu-v3: Check for SVA features iommu/arm-smmu-v3: Seize private ASID iommu/arm-smmu-v3: Share process page tables iommu/arm-smmu-v3: Move definitions to a header iommu/io-pgtable-arm: Move some definitions to a header iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR iommu/amd: Use 4K page for completion wait write-back semaphore iommu/tegra-smmu: Allow to group clients in same swgroup iommu/tegra-smmu: Fix iova->phys translation ... 2020-10-07T09:51:59Z Joerg Roedel jroedel@suse.de 2020-10-07T09:51:59Z urn:sha1:7e3c3883c381aeda903778d7e99fc4cd523be610 2020-10-05T11:31:32Z Rafael J. Wysocki rafael.j.wysocki@intel.com 2020-10-05T11:31:32Z urn:sha1:757e282188f0138a06ebf925c950995feb7bd666 Pull opertaing performance points (OPP) framework fixes for 5.10-rc1 from Viresh Kumar: "- Return -EPROBE_DEFER properly from dev_pm_opp_get_opp_table() (Stephan Gerhold). - Minor cleanups around required-opps (Stephan Gerhold). - Extends opp-supported-hw property to contain multiple versions (Viresh Kumar). - Multiple cleanups around dev_pm_opp_attach_genpd() (Viresh Kumar). - Multiple fixes, cleanups in the OPP core for overall better design (Viresh Kumar)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Allow opp-level to be set to 0 opp: Prevent memory leak in dev_pm_opp_attach_genpd() ARM: tegra: Pass multiple versions in opp-supported-hw property opp: Allow opp-supported-hw to contain multiple versions dt-bindings: opp: Allow opp-supported-hw to contain multiple versions opp: Set required OPPs in reverse order when scaling down opp: Reduce code duplication in _set_required_opps() opp: Drop unnecessary check from dev_pm_opp_attach_genpd() opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1() opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER opp: Remove _dev_pm_opp_find_and_remove_table() wrapper opp: Split out _opp_set_rate_zero() opp: Reuse the enabled flag in !target_freq path opp: Rename regulator_enabled and use it as status of all resources 2020-10-05T06:54:36Z Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-10-05T06:54:36Z urn:sha1:168ae5a74b4a9ebf0bd9c5ea7008af0b7a6ccf04 We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2020-10-03T13:59:57Z Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-10-03T13:59:57Z urn:sha1:21c949b21802341411937291fb04e153b3c8f471 Felipe writes: USB: changes for v5.10 merge window Most of changes are on dwc3 (38.8%) with cdns3 falling close behind (24.1%). The biggest changes here are a series of non-critical fixes to corner cases on dwc3, produced by Thinh N, and a series of major improvements to cdns3 produced by Peter C. We also have the traditional set of new device support (Intel Keem Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch fixes on dwc3 by yours truly and a set of minor changes all over the stack. * tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (117 commits) usb: dwc2: Fix INTR OUT transfers in DDMA mode. usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs usb: dwc2: override PHY input signals with usb role switch support dt-bindings: usb: dwc2: add optional usb-role-switch property usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform dt-bindings: usb: Add Intel Keem Bay USB controller bindings usb: dwc3: gadget: Support up to max stream id usb: dwc3: gadget: Return early if no TRB update usb: dwc3: gadget: Keep TRBs in request order usb: dwc3: gadget: Revise setting IOC when no TRB left usb: dwc3: gadget: Look ahead when setting IOC usb: dwc3: gadget: Allow restarting a transfer usb: bdc: remove duplicated error message usb: dwc3: Stop active transfers before halting the controller usb: cdns3: gadget: enlarge the TRB ring length usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or above usb: cdns3: gadget: need to handle sg case for workaround 2 case usb: cdns3: gadget: handle sg list use case at completion correctly usb: cdns3: gadget: add CHAIN and ISP bit for sg list use case usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer ... 2020-10-01T16:33:01Z Stephen Boyd swboyd@chromium.org 2020-09-25T16:26:04Z urn:sha1:3e98fd6d816cd82f529345870efd435f06e02803 On newer keyboards this key is in a different place. Add both options to the keymap so that both new and old keyboards work. Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> 2020-09-30T00:56:30Z Linus Torvalds torvalds@linux-foundation.org 2020-09-30T00:56:30Z urn:sha1:02de58b24d2e1b2cf947d57205bd2221d897193c Pull devicetree fixes from Rob Herring: - Fix handling of HOST_EXTRACFLAGS for dtc - Several warning fixes for DT bindings * tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting dt-bindings: Fix 'reg' size issues in zynqmp examples ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding dt-bindings: crypto: sa2ul: fix a DT binding check warning 2020-09-28T12:55:12Z Maxime Ripard maxime@cerno.tech 2020-09-24T08:26:42Z urn:sha1:6a7548305a04ae0cd9e9f062c050f265d4bf2d2e The current binding for the RPi firmware uses the simple-bus compatible as a fallback to benefit from its automatic probing of child nodes. However, simple-bus also comes with some constraints, like having the ranges, our case. Let's switch to simple-mfd that provides the same probing logic without those constraints. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech Signed-off-by: Rob Herring <robh@kernel.org>