wireguard-linux/arch/arm/boot, branch jd/shorter-socket-lock

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-04-23T16:36:40Z

Pull ARM SoC fixes from Arnd Bergmann: "A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I found after restarting my randconfig build testing that had been dormant for a while. On the Nokia N950/N9 phone, a DT fix is required to address a boot regression. For the bcm283x (Raspberry Pi), two DT fixes address minor issues" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: imx8: select SOC_BUS soc: tegra: fix tegra_pmc_get_suspend_mode definition soc: fsl: dpio: avoid stack usage warning soc: fsl: dpio: fix incorrect pointer conversions ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y ARM: dts: bcm283x: Disable dsi0 node firmware: xilinx: make firmware_debugfs_root static drivers: soc: xilinx: fix firmware driver Kconfig dependency ARM: dts: bcm283x: Add cells encoding format to firmware bus ARM: dts: OMAP3: disable RNG on N950/N9

Merge tag 'arm-soc/for-5.7/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes

2020-04-23T15:12:48Z

This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.7, please pull the following: - Nicolas provides a fix for 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations") which missed adding proper #address-cells and #size-cells properties and he also disables the DSI node which should have been disabled by default but was not. * tag 'arm-soc/for-5.7/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Disable dsi0 node ARM: dts: bcm283x: Add cells encoding format to firmware bus Link: https://lore.kernel.org/r/20200417171725.1084-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann

Merge tag 'omap-for-v5.6/fixes-rc7-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

2020-04-20T19:42:20Z

Boot regression fix for N950/N9 We need to tag RNG as disabled for N950/N9 as it blocked by the secure mode. We have a similar change done for N900, but I missed adding it for N950/N9 with the recent RNG changes. * tag 'omap-for-v5.6/fixes-rc7-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: OMAP3: disable RNG on N950/N9 Link: https://lore.kernel.org/r/pull-1585340588-558327@atomide.com Signed-off-by: Arnd Bergmann

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-04-16T21:52:29Z

Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ...

ARM: dts: bcm283x: Disable dsi0 node

2020-04-16T20:58:02Z

Since its inception the module was meant to be disabled by default, but the original commit failed to add the relevant property. Fixes: 4aba4cf82054 ("ARM: dts: bcm2835: Add the DSI module nodes and clocks") Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Eric Anholt Signed-off-by: Florian Fainelli

efi/arm: Deal with ADR going out of range in efi_enter_kernel()

2020-04-14T06:32:14Z

Commit 0698fac4ac2a ("efi/arm: Clean EFI stub exit code from cache instead of avoiding it") introduced a PC-relative reference to 'call_cache_fn' into efi_enter_kernel(), which lives way at the end of head.S. In some cases, the ARM version of the ADR instruction does not have sufficient range, resulting in a build error: arch/arm/boot/compressed/head.S:1453: Error: invalid constant (fffffffffffffbe4) after fixup ARM defines an alternative with a wider range, called ADRL, but this does not exist for Thumb-2. At the same time, the ADR instruction in Thumb-2 has a wider range, and so it does not suffer from the same issue. So let's switch to ADRL for ARM builds, and keep the ADR for Thumb-2 builds. Reported-by: Arnd Bergmann Tested-by: Arnd Bergmann Signed-off-by: Ard Biesheuvel Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/20200409130434.6736-6-ardb@kernel.org

Merge tag 'tags/bcm2835-dt-fixes-2020-03-27' into devicetree/fixes

2020-04-13T22:54:22Z

This patch is to be squashed into 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations") as it turned out to be faulty Signed-off-by: Florian Fainelli

ARM: dts: imx6: add fec gpr property.

2020-04-08T01:23:38Z

This is required for wake on lan on i.MX6 Signed-off-by: Martin Fuzzey Reviewed-by: Fugang Duan Signed-off-by: David S. Miller

ARM: dts: imx6: Use gpc for FEC interrupt controller to fix wake on LAN.

2020-04-08T01:23:38Z

In order to wake from suspend by ethernet magic packets the GPC must be used as intc does not have wakeup functionality. But the FEC DT node currently uses interrupt-extended, specificying intc, thus breaking WoL. This problem is probably fallout from the stacked domain conversion as intc used to chain to GPC. So replace "interrupts-extended" by "interrupts" to use the default parent which is GPC. Fixes: b923ff6af0d5 ("ARM: imx6: convert GPC to stacked domains") Signed-off-by: Martin Fuzzey Signed-off-by: David S. Miller

Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-04-03T22:22:05Z

Pull ARM devicetree updates from Arnd Bergmann: "Most of the commits are for additional hardware support and minor fixes for existing machines for all the usual platforms: qcom, amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap, and versatile. The conversion of binding files to machine-readable yaml format continues, along with fixes found during the validation. Andre Przywara takes over maintainership for the old Calxeda Highbank platform and provides a number of updates. The OMAP2+ platforms see a continued move from platform data into dts files, for many devices that relied on a mix of auxiliary data in addition to the DT description A moderate number of new SoCs and machines are added, here is a full list: - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865 (SM8250) is the current high-end phone chip, and IPQ6018 is a new WiFi-6 router chip. - Mediatek MT8516 application processor SoC for voice assistants, along with the "pumpkin" development board - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an evaluation board. - Kontron "sl28" board family based on NXP LS1028A - Eleven variations of the new i.MX6 TechNexion Pico board, combining the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7 SoM carriers - Three additional variants of the Toradex Colibri board family, all based on versions of the NXP i.MX7. - The Pinebook Pro laptop based on Rockchip RK3399 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on the ST-Ericsson u8500 platform - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on STMicroelectronics stm32mp157 - Renesas M3ULCB starter kit for R-Car M3-W+ - Hoperun HiHope development board with Renesas RZ/G2M - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13" * tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits) ARM: dts: ux500: Fix missing node renames arm64: dts: Revert "specify console via command line" MAINTAINERS: Update Calxeda Highbank maintainership arm: dts: calxeda: Group port-phys and sgpio-gpio items arm: dts: calxeda: Fix interrupt grouping arm: dts: calxeda: Provide UART clock arm: dts: calxeda: Basic DT file fixes arm64: dts: specify console via command line ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node ...