WireGuard for the Linux kernel https://git.zx2c4.com/wireguard-linux/atom/arch/arm64/boot?h=jd%2Funified-crypt-queue 2020-04-03T22:22:05Z 2020-04-03T22:22:05Z Linus Torvalds torvalds@linux-foundation.org 2020-04-03T22:22:05Z urn:sha1:854e80bcfdafb8d99d308e21798cd0116338783d Pull ARM devicetree updates from Arnd Bergmann: "Most of the commits are for additional hardware support and minor fixes for existing machines for all the usual platforms: qcom, amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap, and versatile. The conversion of binding files to machine-readable yaml format continues, along with fixes found during the validation. Andre Przywara takes over maintainership for the old Calxeda Highbank platform and provides a number of updates. The OMAP2+ platforms see a continued move from platform data into dts files, for many devices that relied on a mix of auxiliary data in addition to the DT description A moderate number of new SoCs and machines are added, here is a full list: - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865 (SM8250) is the current high-end phone chip, and IPQ6018 is a new WiFi-6 router chip. - Mediatek MT8516 application processor SoC for voice assistants, along with the "pumpkin" development board - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an evaluation board. - Kontron "sl28" board family based on NXP LS1028A - Eleven variations of the new i.MX6 TechNexion Pico board, combining the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7 SoM carriers - Three additional variants of the Toradex Colibri board family, all based on versions of the NXP i.MX7. - The Pinebook Pro laptop based on Rockchip RK3399 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on the ST-Ericsson u8500 platform - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on STMicroelectronics stm32mp157 - Renesas M3ULCB starter kit for R-Car M3-W+ - Hoperun HiHope development board with Renesas RZ/G2M - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13" * tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits) ARM: dts: ux500: Fix missing node renames arm64: dts: Revert "specify console via command line" MAINTAINERS: Update Calxeda Highbank maintainership arm: dts: calxeda: Group port-phys and sgpio-gpio items arm: dts: calxeda: Fix interrupt grouping arm: dts: calxeda: Provide UART clock arm: dts: calxeda: Basic DT file fixes arm64: dts: specify console via command line ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node ... 2020-04-03T20:45:37Z Arnd Bergmann arnd@arndb.de 2020-04-03T20:45:37Z urn:sha1:8bdbf169084ec00833bff61cda0014b7fbdf15ac Include originally "late" updates for OMAP and Qualcomm, now that it's not late any more. * arm/late: (122 commits) ARM: OMAP2+: Drop legacy platform data for ti81xx edma ARM: dts: Configure interconnect target module for ti816x edma ARM: dts: Configure interconnect target module for dm814x tptc3 ARM: dts: Configure interconnect target module for dm814x tptc2 ARM: dts: Configure interconnect target module for dm814x tptc1 ARM: dts: Configure interconnect target module for dm814x tptc0 ARM: dts: Configure interconnect target module for dm814x tpcc ARM: OMAP2+: Drop legacy platform data for dm814x cpsw ARM: dts: Configure interconnect target module for dm814x cpsw clk: ti: Fix dm814x clkctrl for ethernet arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware arm64: dts: sdm845: add IPA information arm64: dts: qcom: db845c: add analog audio support arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s arm64: dts: qcom: c630: Enable audio support arm64: dts: qcom: sdm845: add apr nodes arm64: dts: qcom: sdm845: add slimbus nodes arm64: dts: qcom: sc7180: Update reg names for SDHC arm64: dts: qcom: qcs404: Enable CQE support for eMMC arm64: dts: msm8916: Add fastrpc node ... 2020-04-03T20:12:26Z Linus Torvalds torvalds@linux-foundation.org 2020-04-03T20:12:26Z urn:sha1:ff2ae607c6f329d11a3b0528801ea7474be8c3e9 Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments 2020-04-01T00:29:33Z Linus Torvalds torvalds@linux-foundation.org 2020-04-01T00:29:33Z urn:sha1:29d9f30d4ce6c7a38745a54a8cddface10013490 Pull networking updates from David Miller: "Highlights: 1) Fix the iwlwifi regression, from Johannes Berg. 2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin. 3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich. 4) Add TTL decrement action to openvswitch, from Matteo Croce. 5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov. 6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva. 7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi. 8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey. 9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki. 10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel. 11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko. 12) Support bcmgenet on ACPI, from Jeremy Linton. 13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly. 14) Support XDP meta-data in virtio_net, from Yuya Kusakabe. 15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner. 16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski. 17) Offload FIFO qdisc in mlxsw, from Petr Machata. 18) Support UDP sockets in sockmap, from Lorenz Bauer. 19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang. 20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski. 21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller. 22) Add support for hw offload of MACSEC, from Antoine Tenart. 23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh. 24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others. 25) More progress on adding the netlink interface to ethtool, from Michal Kubecek" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ... 2020-03-31T23:18:55Z Linus Torvalds torvalds@linux-foundation.org 2020-03-31T23:18:55Z urn:sha1:1f944f976d7ef8a29d1ad296253d3a9387c58e62 Pull tty/serial updates from Greg KH: "Here is the big set of TTY / Serial patches for 5.7-rc1 Lots of console fixups and reworking in here, serial core tweaks (doesn't that ever get old, why are we still creating new serial devices?), serial driver updates, line-protocol driver updates, and some vt cleanups and fixes included in here as well. All have been in linux-next with no reported issues" * tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits) serial: 8250: Optimize irq enable after console write serial: 8250: Fix rs485 delay after console write vt: vt_ioctl: fix use-after-free in vt_in_use() vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console tty: serial: make SERIAL_SPRD depend on COMMON_CLK tty: serial: fsl_lpuart: fix return value checking tty: serial: fsl_lpuart: move dma_request_chan() ARM: dts: tango4: Make /serial compatible with ns16550a ARM: dts: mmp*: Make the serial ports compatible with xscale-uart ARM: dts: mmp*: Fix serial port names ARM: dts: mmp2-brownstone: Don't redeclare phandle references ARM: dts: pxa*: Make the serial ports compatible with xscale-uart ARM: dts: pxa*: Fix serial port names ARM: dts: pxa*: Don't redeclare phandle references serial: omap: drop unused dt-bindings header serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete() serial: 8250: 8250_omap: Account for data in flight during DMA teardown ... 2020-03-30T20:42:05Z Linus Torvalds torvalds@linux-foundation.org 2020-03-30T20:42:05Z urn:sha1:063d1942247668eb0bb800aef5afbbef337344be Pull media updates from Mauro Carvalho Chehab: - New sensor driver: imx219 - Support for some new pixelformats - Support for Sun8i SoC - Added more codecs to meson vdec driver - Prepare for removing the legacy usbvision driver by moving it to staging. This driver has issues and use legacy core APIs. If nobody steps up to address those, it is time for its retirement. - Several cleanups and improvements on drivers, with the addition of new supported boards * tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits) media: venus: firmware: Ignore secure call error on first resume media: mtk-vpu: load vpu firmware from the new location media: i2c: video-i2c: fix build errors due to 'imply hwmon' media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ media: hantro: add initial i.MX8MQ support media: dt-bindings: Document i.MX8MQ VPU bindings media: vivid: fix incorrect PA assignment to HDMI outputs media: hantro: Add linux-rockchip mailing list to MAINTAINERS media: cedrus: h264: Fix 4K decoding on H6 media: siano: Use scnprintf() for avoiding potential buffer overflow media: rc: Use scnprintf() for avoiding potential buffer overflow media: allegro: create new struct for channel parameters media: allegro: move mail definitions to separate file media: allegro: pass buffers through firmware media: allegro: verify source and destination buffer in VCU response media: allegro: handle dependency of bitrate and bitrate_peak media: allegro: read bitrate mode directly from control media: allegro: make QP configurable media: allegro: make frame rate configurable media: allegro: skip filler data if possible ... 2020-03-30T04:25:29Z David S. Miller davem@davemloft.net 2020-03-30T04:25:29Z urn:sha1:f0b5989745c3e0e92424d36869a97e4e8df7ab13 Minor comment conflict in mac80211. Signed-off-by: David S. Miller <davem@davemloft.net> 2020-03-27T20:52:32Z Linus Torvalds torvalds@linux-foundation.org 2020-03-27T20:52:32Z urn:sha1:32db9f10d52c97ffc407c7dad81c6fafcad730b2 Pull ARM DT and driver fixes from Arnd Bergmann: "For the devicetree files, there are a total of 20 patches, almost entirely for 32-bit machines: - The Allwinner/sun9i r40 SoC dtsi file contains a number of issues, both for correctness and for style that are addressed in separate patches. This causes most of the changed lines of the DT updates this time. - More Allwinner updates fixing the identification of the security system on sun8i/A33, a recent regression of the A83t ethernet, and a few board specific issues on the TBS-A711 macine. - Several bug fixes for OMAP dts files, most notably fixing the timings for the NAND flash on the Nokia N900 that regressed a while ago after the move to configuring them from DT. Some other OMAPs now set the correct dma limits on the L3 bus, and a regression fix addresses lost Ethernet on dm814x - One incorrect setting in the newly added Raspberry Pi Zero W that may cause issues with the SD card controller. - A missing property on the bcm2835 firmware node caused incorrect DMA settings. - An old bug on the oxnas platform causing spurious interrupts is finally addressed. - A regression on the Exynos Midas board broke the OLED panel power supply. - The i.MX6 phycore SoM specified the wrong voltage for the SoC, this is now set to the values from the datasheet. - Some 64-bit machines use a deprecated string to identify the PSCI firmware. There are also several small code fixes addressing mostly serious issues: - Fix the sunxi rsb bus access to no longer return incorrect data when mixing 8 and 16 bit I/O. - Fix a suspend/resume regression on the OMAP2+ lcdc from a missing quirk in the ti-sysc driver - Fix a NULL pointer access from a race in the fsl dpio driver - Fix a v5.5 regression in the exynos-chipid driver that caused an invalid error code probing the device on non-exynos platforms - Fix an out-of-bounds access in the AMD TEE driver" * tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) soc: samsung: chipid: Fix return value on non-Exynos platforms arm64: dts: Fix leftover entry-methods for PSCI ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards ARM: dts: oxnas: Fix clear-mask property ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: bcm2835-rpi-zero-w: Add missing pinctrl name ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage soc: fsl: dpio: register dpio irq handlers after dpio create tee: amdtee: out of bounds read in find_session() ARM: dts: N900: fix onenand timings bus: ti-sysc: Fix quirk flags for lcdc on am335x ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode ... 2020-03-27T03:01:14Z Grygorii Strashko grygorii.strashko@ti.com 2020-03-23T22:52:53Z urn:sha1:f998dc45e4d0da741850bc1af5e78d04d6e916c2 The TI J721E EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI j721e SoC MCU Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2020-03-27T03:01:14Z Grygorii Strashko grygorii.strashko@ti.com 2020-03-23T22:52:52Z urn:sha1:ae7fdac88a78f23fca3057b15fdefa625d654257 Add DT node for The TI J721E MCU SoC Gigabit Ethernet subsystem (MCU CPSW NUSS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>