wireguard-linux/arch/arm64/kernel/kaslr.c, branch jd/unified-crypt-queue

arm64: Fix CONFIG_ARCH_RANDOM=n build

2020-02-11T09:47:01Z

The entire asm/archrandom.h header is generically included via linux/archrandom.h only when CONFIG_ARCH_RANDOM is already set, so the stub definitions of __arm64_rndr() and __early_cpu_has_rndr() are only visible to KASLR if it explicitly includes the arch-internal header. Acked-by: Mark Brown Signed-off-by: Robin Murphy Signed-off-by: Will Deacon

arm64: Use v8.5-RNG entropy for KASLR seed

2020-01-22T09:54:52Z

When seeding KALSR on a system where we have architecture level random number generation make use of that entropy, mixing it in with the seed passed by the bootloader. Since this is run very early in init before feature detection is complete we open code rather than use archrandom.h. Signed-off-by: Mark Brown Reviewed-by: Mark Rutland Reviewed-by: Ard Biesheuvel Signed-off-by: Will Deacon

arm64: kaslr: Check command line before looking for a seed

2019-11-08T17:36:51Z

Now that we print diagnostics at boot the reason why we do not initialise KASLR matters. Currently we check for a seed before we check if the user has explicitly disabled KASLR on the command line which will result in misleading diagnostics so reverse the order of those checks. We still parse the seed from the DT early so that if the user has both provided a seed and disabled KASLR on the command line we still mask the seed on the command line. Signed-off-by: Mark Brown Acked-by: Mark Rutland Signed-off-by: Catalin Marinas

arm64: kaslr: Announce KASLR status on boot

2019-11-08T17:36:48Z

Currently the KASLR code is silent at boot unless it forces on KPTI in which case a message will be printed for that. This can lead to users incorrectly believing their system has the feature enabled when it in fact does not, and if they notice the problem the lack of any diagnostics makes it harder to understand the problem. Add an initcall which prints a message showing the status of KASLR during boot to make the status clear. This is particularly useful in cases where we don't have a seed. It seems to be a relatively common error for system integrators and administrators to enable KASLR in their configuration but not provide the seed at runtime, often due to seed provisioning breaking at some later point after it is initially enabled and verified. Signed-off-by: Mark Brown Acked-by: Mark Rutland Signed-off-by: Catalin Marinas

Merge branches 'for-next/52-bit-kva', 'for-next/cpu-topology', 'for-next/error-injection', 'for-next/perf', 'for-next/psci-cpuidle', 'for-next/rng', 'for-next/smpboot', 'for-next/tbi' and 'for-next/tlbi' into for-next/core

2019-08-30T11:46:12Z

* for-next/52-bit-kva: (25 commits) Support for 52-bit virtual addressing in kernel space * for-next/cpu-topology: (9 commits) Move CPU topology parsing into core code and add support for ACPI 6.3 * for-next/error-injection: (2 commits) Support for function error injection via kprobes * for-next/perf: (8 commits) Support for i.MX8 DDR PMU and proper SMMUv3 group validation * for-next/psci-cpuidle: (7 commits) Move PSCI idle code into a new CPUidle driver * for-next/rng: (4 commits) Support for 'rng-seed' property being passed in the devicetree * for-next/smpboot: (3 commits) Reduce fragility of secondary CPU bringup in debug configurations * for-next/tbi: (10 commits) Introduce new syscall ABI with relaxed requirements for pointer tags * for-next/tlbi: (6 commits) Handle spurious page faults arising from kernel space

arm64: map FDT as RW for early_init_dt_scan()

2019-08-23T15:39:16Z

Currently in arm64, FDT is mapped to RO before it's passed to early_init_dt_scan(). However, there might be some codes (eg. commit "fdt: add support for rng-seed") that need to modify FDT during init. Map FDT to RO after early fixups are done. Signed-off-by: Hsin-Yi Wang Reviewed-by: Stephen Boyd Reviewed-by: Mike Rapoport Signed-off-by: Will Deacon

arm64: mm: Introduce VA_BITS_MIN

2019-08-09T10:17:16Z

In order to support 52-bit kernel addresses detectable at boot time, the kernel needs to know the most conservative VA_BITS possible should it need to fall back to this quantity due to lack of hardware support. A new compile time constant VA_BITS_MIN is introduced in this patch and it is employed in the KASAN end address, KASLR, and EFI stub. For Arm, if 52-bit VA support is unavailable the fallback is to 48-bits. In other words: VA_BITS_MIN = min (48, VA_BITS) Reviewed-by: Catalin Marinas Signed-off-by: Steve Capper Signed-off-by: Will Deacon

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

arm64/kernel: kaslr: reduce module randomization range to 2 GB

2019-05-23T10:38:11Z

The following commit 7290d5809571 ("module: use relative references for __ksymtab entries") updated the ksymtab handling of some KASLR capable architectures so that ksymtab entries are emitted as pairs of 32-bit relative references. This reduces the size of the entries, but more importantly, it gets rid of statically assigned absolute addresses, which require fixing up at boot time if the kernel is self relocating (which takes a 24 byte RELA entry for each member of the ksymtab struct). Since ksymtab entries are always part of the same module as the symbol they export, it was assumed at the time that a 32-bit relative reference is always sufficient to capture the offset between a ksymtab entry and its target symbol. Unfortunately, this is not always true: in the case of per-CPU variables, a per-CPU variable's base address (which usually differs from the actual address of any of its per-CPU copies) is allocated in the vicinity of the ..data.percpu section in the core kernel (i.e., in the per-CPU reserved region which follows the section containing the core kernel's statically allocated per-CPU variables). Since we randomize the module space over a 4 GB window covering the core kernel (based on the -/+ 4 GB range of an ADRP/ADD pair), we may end up putting the core kernel out of the -/+ 2 GB range of 32-bit relative references of module ksymtab entries that refer to per-CPU variables. So reduce the module randomization range a bit further. We lose 1 bit of randomization this way, but this is something we can tolerate. Cc: # v4.19+ Signed-off-by: Ard Biesheuvel Signed-off-by: Will Deacon

arm64: kaslr: ensure randomized quantities are clean also when kaslr is off

2019-02-01T14:07:23Z

Commit 1598ecda7b23 ("arm64: kaslr: ensure randomized quantities are clean to the PoC") added cache maintenance to ensure that global variables set by the kaslr init routine are not wiped clean due to cache invalidation occurring during the second round of page table creation. However, if kaslr_early_init() exits early with no randomization being applied (either due to the lack of a seed, or because the user has disabled kaslr explicitly), no cache maintenance is performed, leading to the same issue we attempted to fix earlier, as far as the module_alloc_base variable is concerned. Note that module_alloc_base cannot be initialized statically, because that would cause it to be subject to a R_AARCH64_RELATIVE relocation, causing it to be overwritten by the second round of KASLR relocation processing. Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR") Cc: # v4.6+ Signed-off-by: Ard Biesheuvel Signed-off-by: Will Deacon