wireguard-linux/arch/arm64/mm/context.c, branch jd/orphan-parallel

arm64: mm: Pin down ASIDs for sharing mm with devices

2020-09-28T21:15:38Z

To enable address space sharing with the IOMMU, introduce arm64_mm_context_get() and arm64_mm_context_put(), that pin down a context and ensure that it will keep its ASID after a rollover. Export the symbols to let the modular SMMUv3 driver use them. Pinning is necessary because a device constantly needs a valid ASID, unlike tasks that only require one when running. Without pinning, we would need to notify the IOMMU when we're about to use a new ASID for a task, and it would get complicated when a new task is assigned a shared ASID. Consider the following scenario with no ASID pinned: 1. Task t1 is running on CPUx with shared ASID (gen=1, asid=1) 2. Task t2 is scheduled on CPUx, gets ASID (1, 2) 3. Task tn is scheduled on CPUy, a rollover occurs, tn gets ASID (2, 1) We would now have to immediately generate a new ASID for t1, notify the IOMMU, and finally enable task tn. We are holding the lock during all that time, since we can't afford having another CPU trigger a rollover. The IOMMU issues invalidation commands that can take tens of milliseconds. It gets needlessly complicated. All we wanted to do was schedule task tn, that has no business with the IOMMU. By letting the IOMMU pin tasks when needed, we avoid stalling the slow path, and let the pinning fail when we're out of shareable ASIDs. After a rollover, the allocator expects at least one ASID to be available in addition to the reserved ones (one per CPU). So (NR_ASIDS - NR_CPUS - 1) is the maximum number of ASIDs that can be shared with the IOMMU. Signed-off-by: Jean-Philippe Brucker Reviewed-by: Jonathan Cameron Link: https://lore.kernel.org/r/20200918101852.582559-5-jean-philippe@linaro.org Signed-off-by: Will Deacon

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

arm64/mm: save memory access in check_and_switch_context() fast switch path

2020-07-30T11:58:40Z

On arm64, smp_processor_id() reads a per-cpu `cpu_number` variable, using the per-cpu offset stored in the tpidr_el1 system register. In some cases we generate a per-cpu address with a sequence like: cpu_ptr = &per_cpu(ptr, smp_processor_id()); Which potentially incurs a cache miss for both `cpu_number` and the in-memory `__per_cpu_offset` array. This can be written more optimally as: cpu_ptr = this_cpu_ptr(ptr); Which only needs the offset from tpidr_el1, and does not need to load from memory. The following two test cases show a small performance improvement measured on a 46-cpus qualcomm machine with 5.8.0-rc4 kernel. Test 1: (about 0.3% improvement) #cat b.sh make clean && make all -j138 #perf stat --repeat 10 --null --sync sh b.sh - before this patch Performance counter stats for 'sh b.sh' (10 runs): 298.62 +- 1.86 seconds time elapsed ( +- 0.62% ) - after this patch Performance counter stats for 'sh b.sh' (10 runs): 297.734 +- 0.954 seconds time elapsed ( +- 0.32% ) Test 2: (about 1.69% improvement) 'perf stat -r 10 perf bench sched messaging' Then sum the total time of 'sched/messaging' by manual. - before this patch total 0.707 sec for 10 times - after this patch totol 0.695 sec for 10 times Signed-off-by: Pingfan Liu Acked-by: Mark Rutland Cc: Will Deacon Cc: Steve Capper Cc: Mark Rutland Cc: Vladimir Murzin Cc: Jean-Philippe Brucker Link: https://lore.kernel.org/r/1594389852-19949-1-git-send-email-kernelfans@gmail.com Signed-off-by: Catalin Marinas

arm64: mm: Add asid_gen_match() helper

2020-05-21T13:46:14Z

Add a macro to check if an ASID is from the current generation, since a subsequent patch will introduce a third user for this test. Signed-off-by: Jean-Philippe Brucker Link: https://lore.kernel.org/r/20200519175502.2504091-6-jean-philippe@linaro.org Signed-off-by: Will Deacon

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2020-03-31T17:05:01Z

Pull arm64 updates from Catalin Marinas: "The bulk is in-kernel pointer authentication, activity monitors and lots of asm symbol annotations. I also queued the sys_mremap() patch commenting the asymmetry in the address untagging. Summary: - In-kernel Pointer Authentication support (previously only offered to user space). - ARM Activity Monitors (AMU) extension support allowing better CPU utilisation numbers for the scheduler (frequency invariance). - Memory hot-remove support for arm64. - Lots of asm annotations (SYM_*) in preparation for the in-kernel Branch Target Identification (BTI) support. - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU init callbacks, support for new DT compatibles. - IPv6 header checksum optimisation. - Fixes: SDEI (software delegated exception interface) double-lock on hibernate with shared events. - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm() converted to C, cpufeature finalisation helper. - sys_mremap() comment explaining the asymmetric address untagging behaviour" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) mm/mremap: Add comment explaining the untagging behaviour of mremap() arm64: head: Convert install_el2_stub to SYM_INNER_LABEL arm64: Introduce get_cpu_ops() helper function arm64: Rename cpu_read_ops() to init_cpu_ops() arm64: Declare ACPI parking protocol CPU operation if needed arm64: move kimage_vaddr to .rodata arm64: use mov_q instead of literal ldr arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH lkdtm: arm64: test kernel pointer authentication arm64: compile the kernel with ptrauth return address signing kconfig: Add support for 'as-option' arm64: suspend: restore the kernel ptrauth keys arm64: __show_regs: strip PAC from lr in printk arm64: unwind: strip PAC from kernel addresses arm64: mask PAC bits of __builtin_return_address arm64: initialize ptrauth keys for kernel booting task arm64: initialize and switch ptrauth kernel keys arm64: enable ptrauth earlier arm64: cpufeature: handle conflicts based on capability arm64: cpufeature: Move cpu capability helpers inside C file ...

arm64: context: Fix ASID limit in boot messages

2020-03-02T12:10:38Z

Since commit f88f42f853a8 ("arm64: context: Free up kernel ASIDs if KPTI is not in use"), the NUM_USER_ASIDS macro doesn't correspond to the effective number of ASIDs when KPTI is enabled. Get an accurate number of available ASIDs in an arch_initcall, once we've discovered all CPUs' capabilities and know if we still need to halve the ASID space for KPTI. Fixes: f88f42f853a8 ("arm64: context: Free up kernel ASIDs if KPTI is not in use") Reviewed-by: Vladimir Murzin Signed-off-by: Jean-Philippe Brucker Signed-off-by: Will Deacon

arm64: mm: convert cpu_do_switch_mm() to C

2020-02-27T14:30:50Z

There's no reason that cpu_do_switch_mm() needs to be written as an assembly function, and having it as a C function would make it easier to maintain. This patch converts cpu_do_switch_mm() to C, removing code that this change makes redundant (e.g. the mmid macro). Since the header comment was stale and the prototype now implies all the necessary information, this comment is removed. The 'pgd_phys' argument is made a phys_addr_t to match the return type of virt_to_phys(). At the same time, post_ttbr_update_workaround() is updated to use IS_ENABLED(), which allows the compiler to figure out it can elide calls for !CONFIG_CAVIUM_ERRATUM_27456 builds. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland Cc: Will Deacon [catalin.marinas@arm.com: change comments from asm-style to C-style] Signed-off-by: Catalin Marinas

arm64: context: Free up kernel ASIDs if KPTI is not in use

2020-01-16T12:45:05Z

We can extend user ASID space if it turns out that system does not require KPTI. We start with kernel ASIDs reserved because CPU caps are not finalized yet and free them up lazily on the next rollover if we confirm than KPTI is not in use. Reviewed-by: Catalin Marinas Signed-off-by: Vladimir Murzin Signed-off-by: Will Deacon

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

2019-06-19T15:09:07Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Reviewed-by: Enrico Weigelt Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman

arm64: mm: Drop the unused cpu parameter

2018-10-09T16:17:23Z

Cpu parameter is never used in flush_context, remove it. Acked-by: Will Deacon Signed-off-by: Shaokun Zhang Signed-off-by: Catalin Marinas