wireguard-linux/arch/ia64/kernel/dma-mapping.c, branch jd/unified-crypt-queue

dma-direct: provide mmap and get_sgtable method overrides

2019-11-11T09:52:15Z

For dma-direct we know that the DMA address is an encoding of the physical address that we can trivially decode. Use that fact to provide implementations that do not need the arch_dma_coherent_to_pfn architecture hook. Note that we still can only support mmap of non-coherent memory only if the architecture provides a way to set an uncached bit in the page tables. This must be true for architectures that use the generic remap helpers, but other architectures can also manually select it. Signed-off-by: Christoph Hellwig Reviewed-by: Max Filippov

ia64: remove CONFIG_SWIOTLB ifdefs

2019-08-16T21:32:26Z

CONFIG_SWIOTLB is now unconditionally selected on ia64, so remove the ifdefs. Signed-off-by: Christoph Hellwig Link: https://lkml.kernel.org/r/20190813072514.23299-28-hch@lst.de Signed-off-by: Tony Luck

ia64: rework iommu probing

2019-08-16T18:33:57Z

ia64 currently organizes the iommu probing along machves, which isn't very helpful. Instead just try to probe for Intel IOMMUs in mem_init as they are properly described in ACPI and if none was found initialize the swiotlb buffer. The HP SBA handling is then only done delayed when the actual hardware is probed. Only in the case that we actually found usable IOMMUs we then set up the DMA ops and free the not needed swiotlb buffer. This scheme gets rid of the need for the dma_init machvec operation, and the dig_vtd machvec. Signed-off-by: Christoph Hellwig Link: https://lkml.kernel.org/r/20190813072514.23299-24-hch@lst.de Signed-off-by: Tony Luck

ia64: remove the zx1 swiotlb machvec

2019-08-16T18:33:57Z

The aim of this machvec is to support devices with < 32-bit dma masks. But given that ia64 only has a ZONE_DMA32 and not a ZONE_DMA that isn't supported by swiotlb either. Signed-off-by: Christoph Hellwig Link: https://lkml.kernel.org/r/20190813072514.23299-21-hch@lst.de Signed-off-by: Tony Luck

dma-mapping: bypass indirect calls for dma-direct

2018-12-13T20:06:18Z

Avoid expensive indirect calls in the fast path DMA mapping operations by directly calling the dma_direct_* ops if we are using the directly mapped DMA operations. Signed-off-by: Christoph Hellwig Acked-by: Jesper Dangaard Brouer Tested-by: Jesper Dangaard Brouer Tested-by: Tony Luck

dma-direct: merge swiotlb_dma_ops into the dma_direct code

2018-12-13T20:06:17Z

While the dma-direct code is (relatively) clean and simple we actually have to use the swiotlb ops for the mapping on many architectures due to devices with addressing limits. Instead of keeping two implementations around this commit allows the dma-direct implementation to call the swiotlb bounce buffering functions and thus share the guts of the mapping implementation. This also simplified the dma-mapping setup on a few architectures where we don't have to differenciate which implementation to use. Signed-off-by: Christoph Hellwig Acked-by: Jesper Dangaard Brouer Tested-by: Jesper Dangaard Brouer Tested-by: Tony Luck

swiotlb: remove dma_mark_clean

2018-12-13T20:06:14Z

Instead of providing a special dma_mark_clean hook just for ia64, switch ia64 to use the normal arch_sync_dma_for_cpu hooks instead. This means that we now also set the PG_arch_1 bit for pages in the swiotlb buffer, which isn't stricly needed as we will never execute code out of the swiotlb buffer, but otherwise harmless. Signed-off-by: Christoph Hellwig Acked-by: Jesper Dangaard Brouer Tested-by: Jesper Dangaard Brouer Tested-by: Tony Luck

dma-debug: move initialization to common code

2018-05-08T11:02:42Z

Most mainstream architectures are using 65536 entries, so lets stick to that. If someone is really desperate to override it that can still be done through , but I'd rather see a really good rationale for that. dma_debug_init is now called as a core_initcall, which for many architectures means much earlier, and provides dma-debug functionality earlier in the boot process. This should be safe as it only relies on the memory allocator already being available. Signed-off-by: Christoph Hellwig Acked-by: Marek Szyprowski Reviewed-by: Robin Murphy

ia64: clean up swiotlb support

2018-01-15T08:35:53Z

Move the few remaining bits of swiotlb glue towards their callers, and remove the pointless on ia64 swiotlb variable. Signed-off-by: Christoph Hellwig Acked-by: Christian König

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman