wireguard-linux/arch/ia64, branch jd/unified-crypt-queue

mm/memory_hotplug: add pgprot_t to mhp_params

2020-04-10T22:36:21Z

devm_memremap_pages() is currently used by the PCI P2PDMA code to create struct page mappings for IO memory. At present, these mappings are created with PAGE_KERNEL which implies setting the PAT bits to be WB. However, on x86, an mtrr register will typically override this and force the cache type to be UC-. In the case firmware doesn't set this register it is effectively WB and will typically result in a machine check exception when it's accessed. Other arches are not currently likely to function correctly seeing they don't have any MTRR registers to fall back on. To solve this, provide a way to specify the pgprot value explicitly to arch_add_memory(). Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a simple change to pass the pgprot_t down to their respective functions which set up the page tables. For x86_32, set the page tables explicitly using _set_memory_prot() (seeing they are already mapped). For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this should be fine, for now, seeing these architectures don't support ZONE_DEVICE. A check in __add_pages() is also added to ensure the pgprot parameter was set for all arches. Signed-off-by: Logan Gunthorpe Signed-off-by: Andrew Morton Acked-by: David Hildenbrand Acked-by: Michal Hocko Acked-by: Dan Williams Cc: Andy Lutomirski Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Catalin Marinas Cc: Christoph Hellwig Cc: Dave Hansen Cc: Eric Badger Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Jason Gunthorpe Cc: Michael Ellerman Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.com Signed-off-by: Linus Torvalds

mm/memory_hotplug: rename mhp_restrictions to mhp_params

2020-04-10T22:36:21Z

The mhp_restrictions struct really doesn't specify anything resembling a restriction anymore so rename it to be mhp_params as it is a list of extended parameters. Signed-off-by: Logan Gunthorpe Signed-off-by: Andrew Morton Reviewed-by: David Hildenbrand Reviewed-by: Dan Williams Acked-by: Michal Hocko Cc: Andy Lutomirski Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Catalin Marinas Cc: Christoph Hellwig Cc: Dave Hansen Cc: Eric Badger Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Jason Gunthorpe Cc: Michael Ellerman Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Link: http://lkml.kernel.org/r/20200306170846.9333-3-logang@deltatee.com Signed-off-by: Linus Torvalds

mm/special: create generic fallbacks for pte_special() and pte_mkspecial()

2020-04-10T22:36:21Z

Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL but required to define quite similar fallback stubs for special page table entry helpers such as pte_special() and pte_mkspecial(), as they get build in generic MM without a config check. This creates two generic fallback stub definitions for these helpers, eliminating much code duplication. mips platform has a special case where pte_special() and pte_mkspecial() visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires. This restricts those symbol visibility in order to avoid redefinitions which is now exposed through this new generic stubs and subsequent build failure. arm platform set_pte_at() definition needs to be moved into a C file just to prevent a build failure. [anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas] Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual Signed-off-by: Andrew Morton Acked-by: Guo Ren [csky] Acked-by: Geert Uytterhoeven [m68k] Acked-by: Stafford Horne [openrisc] Acked-by: Helge Deller [parisc] Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Russell King Cc: Brian Cain Cc: Tony Luck Cc: Fenghua Yu Cc: Sam Creasey Cc: Michal Simek Cc: Ralf Baechle Cc: Paul Burton Cc: Nick Hu Cc: Greentime Hu Cc: Vincent Chen Cc: Ley Foon Tan Cc: Jonas Bonn Cc: Stefan Kristiansson Cc: "James E.J. Bottomley" Cc: "David S. Miller" Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Cc: Guan Xuetao Cc: Chris Zankel Cc: Max Filippov Cc: Thomas Bogendoerfer Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds

mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS

2020-04-10T22:36:21Z

There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the existing VM_STACK_DEFAULT_FLAGS. While here, also define some more macros with standard VMA access flag combinations that are used frequently across many platforms. Apart from simplification, this reduces code duplication as well. Signed-off-by: Anshuman Khandual Signed-off-by: Andrew Morton Reviewed-by: Vlastimil Babka Acked-by: Geert Uytterhoeven Cc: Richard Henderson Cc: Vineet Gupta Cc: Russell King Cc: Catalin Marinas Cc: Mark Salter Cc: Guo Ren Cc: Yoshinori Sato Cc: Brian Cain Cc: Tony Luck Cc: Michal Simek Cc: Ralf Baechle Cc: Paul Burton Cc: Nick Hu Cc: Ley Foon Tan Cc: Jonas Bonn Cc: "James E.J. Bottomley" Cc: Michael Ellerman Cc: Paul Walmsley Cc: Heiko Carstens Cc: Rich Felker Cc: "David S. Miller" Cc: Guan Xuetao Cc: Thomas Gleixner Cc: Jeff Dike Cc: Chris Zankel Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds

kasan: stackdepot: move filter_irq_stacks() to stackdepot.c

2020-04-07T17:43:43Z

filter_irq_stacks() can be used by other tools (e.g. KMSAN), so it needs to be moved to a common location. lib/stackdepot.c seems a good place, as filter_irq_stacks() is usually applied to the output of stack_trace_save(). This patch has been previously mailed as part of KMSAN RFC patch series. [glider@google.co: nds32: linker script: add SOFTIRQENTRY_TEXT\ Link: http://lkml.kernel.org/r/20200311121002.241430-1-glider@google.com [glider@google.com: add IRQENTRY_TEXT and SOFTIRQENTRY_TEXT to linker script] Link: http://lkml.kernel.org/r/20200311121124.243352-1-glider@google.com Signed-off-by: Alexander Potapenko Signed-off-by: Andrew Morton Cc: Vegard Nossum Cc: Dmitry Vyukov Cc: Marco Elver Cc: Andrey Konovalov Cc: Andrey Ryabinin Cc: Arnd Bergmann Cc: Sergey Senozhatsky Link: http://lkml.kernel.org/r/20200220141916.55455-3-glider@google.com Signed-off-by: Linus Torvalds

asm-generic: fix unistd_32.h generation format

2020-04-07T17:43:42Z

Generated files are also checked by sparse that's why add newline to remove sparse (C=1) warning. The issue was found on Microblaze and reported like this: ./arch/microblaze/include/generated/uapi/asm/unistd_32.h:438:45: warning: no newline at end of file Mips and PowerPC have it already but let's align with style used by m68k. Signed-off-by: Michal Simek Signed-off-by: Andrew Morton Reviewed-by: Stefan Asserhall Acked-by: Max Filippov (xtensa) Cc: Arnd Bergmann Cc: Max Filippov Cc: Benjamin Herrenschmidt Cc: Chris Zankel Cc: David S. Miller Cc: Fenghua Yu Cc: Helge Deller Cc: Ivan Kokshaysky Cc: James Bottomley Cc: Matt Turner Cc: Michael Ellerman Cc: Paul Burton Cc: Paul Mackerras Cc: Ralf Baechle Cc: Rich Felker Cc: Richard Henderson Cc: Tony Luck Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/4d32ab4e1fb2edb691d2e1687e8fb303c09fd023.1581504803.git.michal.simek@xilinx.com Signed-off-by: Linus Torvalds

Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-04-03T20:22:40Z

Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...

Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2020-04-03T20:12:26Z

Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-04-03T00:03:53Z

Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...

mm: allow VM_FAULT_RETRY for multiple times

2020-04-02T16:35:30Z

The idea comes from a discussion between Linus and Andrea [1]. Before this patch we only allow a page fault to retry once. We achieved this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing handle_mm_fault() the second time. This was majorly used to avoid unexpected starvation of the system by looping over forever to handle the page fault on a single page. However that should hardly happen, and after all for each code path to return a VM_FAULT_RETRY we'll first wait for a condition (during which time we should possibly yield the cpu) to happen before VM_FAULT_RETRY is really returned. This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY flag when we receive VM_FAULT_RETRY. It means that the page fault handler now can retry the page fault for multiple times if necessary without the need to generate another page fault event. Meanwhile we still keep the FAULT_FLAG_TRIED flag so page fault handler can still identify whether a page fault is the first attempt or not. Then we'll have these combinations of fault flags (only considering ALLOW_RETRY flag and TRIED flag): - ALLOW_RETRY and !TRIED: this means the page fault allows to retry, and this is the first try - ALLOW_RETRY and TRIED: this means the page fault allows to retry, and this is not the first try - !ALLOW_RETRY and !TRIED: this means the page fault does not allow to retry at all - !ALLOW_RETRY and TRIED: this is forbidden and should never be used In existing code we have multiple places that has taken special care of the first condition above by checking against (fault_flags & FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect the first retry of a page fault by checking against both (fault_flags & FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now even the 2nd try will have the ALLOW_RETRY set, then use that helper in all existing special paths. One example is in __lock_page_or_retry(), now we'll drop the mmap_sem only in the first attempt of page fault and we'll keep it in follow up retries, so old locking behavior will be retained. This will be a nice enhancement for current code [2] at the same time a supporting material for the future userfaultfd-writeprotect work, since in that work there will always be an explicit userfault writeprotect retry for protected pages, and if that cannot resolve the page fault (e.g., when userfaultfd-writeprotect is used in conjunction with swapped pages) then we'll possibly need a 3rd retry of the page fault. It might also benefit other potential users who will have similar requirement like userfault write-protection. GUP code is not touched yet and will be covered in follow up patch. Please read the thread below for more information. [1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/ [2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/ Suggested-by: Linus Torvalds Suggested-by: Andrea Arcangeli Signed-off-by: Peter Xu Signed-off-by: Andrew Morton Tested-by: Brian Geffon Cc: Bobby Powers Cc: David Hildenbrand Cc: Denis Plotnikov Cc: "Dr . David Alan Gilbert" Cc: Hugh Dickins Cc: Jerome Glisse Cc: Johannes Weiner Cc: "Kirill A . Shutemov" Cc: Martin Cracauer Cc: Marty McFadden Cc: Matthew Wilcox Cc: Maya Gokhale Cc: Mel Gorman Cc: Mike Kravetz Cc: Mike Rapoport Cc: Pavel Emelyanov Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com Signed-off-by: Linus Torvalds