wireguard-linux/arch/m68k/atari/config.c, branch jd/unified-crypt-queue

m68k/atari: Convert Falcon IDE drivers to platform drivers

2019-11-18T09:18:59Z

Autoloading of Falcon IDE driver modules requires converting these drivers to platform drivers. Add platform device for Falcon IDE interface in Atari platform setup code. Use this in the pata_falcon driver in place of the simple platform device set up on the fly. Convert falconide driver to use the same platform device that is used by pata_falcon also. (With the introduction of a platform device for the Atari Falcon IDE interface, the old Falcon IDE driver no longer loads (resource already claimed by the platform device)). Tested (as built-in driver) on my Atari Falcon. Signed-off-by: Michael Schmitz Acked-by: Bartlomiej Zolnierkiewicz Link: https://lore.kernel.org/r/1573008449-8226-1-git-send-email-schmitzmic@gmail.com Signed-off-by: Geert Uytterhoeven

m68k: atari: Rename shifter to shifter_st to avoid conflict

2019-08-19T11:24:10Z

When test-compiling the BCM2835 pin control driver on m68k: In file included from arch/m68k/include/asm/io_mm.h:32:0, from arch/m68k/include/asm/io.h:8, from include/linux/io.h:13, from include/linux/irq.h:20, from include/linux/gpio/driver.h:7, from drivers/pinctrl/bcm/pinctrl-bcm2835.c:17: drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function 'bcm2711_pull_config_set': arch/m68k/include/asm/atarihw.h:190:22: error: expected identifier or '(' before 'volatile' # define shifter ((*(volatile struct SHIFTER *)SHF_BAS)) "shifter" is a too generic name for a global definition. As the corresponding definition for Atari TT is already called "shifter_tt", fix this by renaming the definition for Atari ST to "shifter_st". Reported-by: kbuild test robot Suggested-by: Michael Schmitz Signed-off-by: Geert Uytterhoeven Reviewed-by: Linus Walleij

m68k: Drop ARCH_USES_GETTIMEOFFSET

2019-03-25T09:22:24Z

The functions that implement arch_gettimeoffset are re-used by new clocksource drivers in subsequent patches. Signed-off-by: Finn Thain Acked-by: Linus Walleij Signed-off-by: Geert Uytterhoeven

m68k/atari: Avoid VLA use in atari_switches_setup()

2019-01-21T09:36:53Z

With gcc 7.3.0: arch/m68k/atari/config.c: In function ‘atari_switches_setup’: arch/m68k/atari/config.c:151:2: warning: ISO C90 forbids variable length array ‘switches’ [-Wvla] char switches[strlen(str) + 1]; ^~~~ Replace the variable size by the maximum kernel command line size (256 bytes), which is an upper limit for all suboptions. Signed-off-by: Geert Uytterhoeven

m68k: Remove unused set_clock_mmss() helpers

2018-07-29T08:48:18Z

Commit 397ac99c6cef ("m68k: remove dead timer code") removed set_rtc_mmss() because it was unused in 2012. However, this was itself the only user of the mach_set_clock_mmss() callback and the many implementations of that callback, which are equally unused. This removes all of those as well. Signed-off-by: Arnd Bergmann Acked-by: Greg Ungerer Signed-off-by: Geert Uytterhoeven

m68k/atari: Modernize printing of kernel messages

2017-02-12T09:36:49Z

- Convert from printk() to pr_*(), - Add missing continuations, to fix user-visible breakage, - Drop useless WARNING prefix, - Move trailing spaces to start of continuations. Note that the "Keyboard overrun" message will now only be generated when the kernel has been compiled for debugging. Fixes: 4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation lines") Signed-off-by: Geert Uytterhoeven

m68k/atari: Use seq_puts() in atari_get_hardware_list()

2016-12-09T07:52:29Z

A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Geert Uytterhoeven

m68k: Use IS_ENABLED() instead of checking for built-in or module

2016-09-19T09:29:45Z

Signed-off-by: Geert Uytterhoeven

m68k/atari, m68k/sun3: Fix SCSI platform device registration when driver is modular

2016-01-10T12:56:40Z

Fixes: 3ff228af84b5 ("atari_scsi: Convert to platform device") Fixes: 0d31f8759109 ("sun3_scsi: Convert to platform device") Reported-by: Michael Schmitz Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven

atari_scsi: Convert to platform device

2014-11-20T08:11:14Z

Convert atari_scsi to platform device and eliminate scsi_register(). Validate __setup options later on so that module options are checked as well. Remove the comment about the scsi mid-layer disabling the host irq as it is no longer true (AFAICT). Also remove the obsolete slow interrupt stuff (IRQ_TYPE_SLOW == 0 anyway). Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke Tested-by: Michael Schmitz Acked-by: Geert Uytterhoeven Signed-off-by: Christoph Hellwig