wireguard-linux/arch/m68k/atari/time.c, branch jd/unified-crypt-queue

m68k: atari: Convert to clocksource API

2019-03-25T09:22:24Z

Add a platform clocksource by adapting the existing arch_gettimeoffset implementation. Normally the MFP timer C interrupt flag would be used to check for timer counter wrap-around. Unfortunately, that flag gets cleared by the MFP itself (due to automatic End-of-Interrupt mode). This means that mfp_timer_c_handler() and atari_read_clk() must race when accounting for counter wrap-around. That problem is avoided by effectively stopping the clock when it might otherwise jump backwards (due to interrupt latency). Note that this may affect clock accuracy. After the timer interrupt is asserted, wait for the counter to be reloaded so that atari_read_clk() will not see the intermediate state as that would cause the clock to jump backwards. Signed-off-by: Finn Thain Acked-by: Linus Walleij Tested-by: Michael Schmitz Signed-off-by: Geert Uytterhoeven

m68k: Call timer_interrupt() with interrupts disabled

2019-03-25T09:22:24Z

Some platforms execute their timer handler with the interrupt priority level set below 6. That means the handler could be interrupted by another driver and this could lead to re-entry of the timer core. Avoid this by use of local_irq_save/restore for timer interrupt dispatch. This provides mutual exclusion around the timer interrupt flag access which is needed later in this series for the clocksource conversion. Reported-by: Thomas Gleixner Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1811131407120.2697@nanos.tec.linutronix.de Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven

m68k: Remove unused set_clock_mmss() helpers

2018-07-29T08:48:18Z

Commit 397ac99c6cef ("m68k: remove dead timer code") removed set_rtc_mmss() because it was unused in 2012. However, this was itself the only user of the mach_set_clock_mmss() callback and the many implementations of that callback, which are equally unused. This removes all of those as well. Signed-off-by: Arnd Bergmann Acked-by: Greg Ungerer Signed-off-by: Geert Uytterhoeven

m68k/atari: Remove obsolete IRQ_TYPE_*

2015-01-15T12:44:51Z

IRQ_TYPE_SLOW, IRQ_TYPE_FAST, and IRQ_TYPE_PRIO are no longer used by the Atari platform interrupt code since commit 734085651c9b80aa ("[PATCH] m68k: convert atari irq code") in v2.6.18-rc1, so drop them. Note that their values have been reused for different purposes (IRQ_TYPE_NONE, IRQ_TYPE_EDGE_RISING, and IRQ_TYPE_EDGE_FALLING) since commit 6a6de9ef5850d063 ("[PATCH] genirq: core") in v2.6.18-rc1. Signed-off-by: Geert Uytterhoeven

m68k: set arch_gettimeoffset directly

2012-12-24T16:36:34Z

remove m68k's mach_gettimeoffset function pointer, and instead directly set the arch_gettimeoffset function pointer. This requires multiplying all function results by 1000, since the removed m68k_gettimeoffset() did this. Also, s/unsigned long/u32/ just to make the function prototypes exactly match that of arch_gettimeoffset. Cc: Joshua Thompson Cc: Sam Creasey Acked-by: Geert Uytterhoeven Acked-by: Phil Blundell Signed-off-by: Stephen Warren

m68k: Add export.h to the m68k specific files as required

2011-10-31T23:30:59Z

Signed-off-by: Paul Gortmaker

m68k: atari - Rename "mfp" to "st_mfp"

2009-02-22T17:23:02Z

http://kisskb.ellerman.id.au/kisskb/buildresult/72115/: | net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile' | net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token | net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type | distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed This is caused by | # define mfp ((*(volatile struct MFP*)MFP_BAS)) in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in net/mac80211/ieee80211_i.h. Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds

m68k: atari core - Kill warn_unused_result warnings

2009-01-12T19:56:36Z

warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven

m68k: Define rtc_lock on Atari

2008-10-14T17:23:27Z

The nvram and rtc-cmos drivers use the spinlock rtc_lock to protect against concurrent accesses to the CMOS memory. As m68k doesn't support SMP or preempt yet, the spinlock calls tend to get optimized away, but not for all configurations, causing in some rare cases: | ERROR: "rtc_lock" [drivers/rtc/rtc-cmos.ko] undefined! | ERROR: "rtc_lock" [drivers/char/nvram.ko] undefined! Add the spinlock to the Atari core code to avoid this. Signed-off-by: Geert Uytterhoeven Acked-by: Michael Schmitz Signed-off-by: Linus Torvalds

m68k: use bcd2bin/bin2bcd

2008-10-14T17:23:26Z

This patch changes m68k to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. It also remove local bcd2bin/bin2bcd implementations in favor of the global ones. Signed-off-by: Adrian Bunk Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds