wireguard-linux/arch/mips/boot/dts/qca, branch jd/orphan-parallel

MIPS: ath79: ar9331: rename uart to serial node

2020-05-15T07:33:46Z

schema violation was detected by the dtbs_check Signed-off-by: Oleksij Rempel Signed-off-by: Thomas Bogendoerfer

MIPS: ath79: ar9331_dpt_module: update led nodes

2020-05-15T07:33:34Z

Fit led nodes to the latest naming schema. Signed-off-by: Oleksij Rempel Signed-off-by: Thomas Bogendoerfer

MIPS: ath79: ar9331: add ar9331-switch node

2019-12-21T01:05:47Z

Add switch node supported by dsa ar9331 driver. Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller

MIPS: dts: ar9331: fix interrupt-controller size

2019-09-30T22:22:35Z

It is two registers each of 4 byte. Signed-off-by: Oleksij Rempel Signed-off-by: Paul Burton Cc: Rob Herring Cc: Mark Rutland Cc: Pengutronix Kernel Team Cc: Ralf Baechle Cc: James Hogan Cc: devicetree@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org

MIPS: ath79: ar9331: add Ethernet nodes

2019-05-26T20:22:50Z

Add ethernet nodes supported by ag71xx driver. Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller

MIPS: ath79: Use the IRQ based GPIO key driver for the buttons

2018-07-28T02:29:53Z

Now that the GPIO driver support interrupts we don't need to poll the buttons. Signed-off-by: Alban Bedel Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/15283/ Cc: linux-mips@linux-mips.org Cc: Rob Herring Cc: Mark Rutland Cc: Ralf Baechle Cc: Antony Pavlov Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org

MIPS: ath79: Fix the USB PHY reset names

2018-07-26T18:21:28Z

The binding for the USB PHY went thru before the driver. However the new version of the driver now use the PHY core support for reset, and this expect the reset to be named "phy". So remove the "usb-" prefix from the the reset names. Signed-off-by: Alban Bedel Acked-by: Rob Herring Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/15282/ Cc: linux-kernel@vger.kernel.org Cc: Rob Herring Cc: Mark Rutland Cc: Ralf Baechle Cc: Antony Pavlov Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org

kbuild: remove all dummy assignments to obj-

2017-11-18T02:46:06Z

Now kbuild core scripts create empty built-in.o where necessary. Remove "obj- := dummy.o" tricks. Signed-off-by: Masahiro Yamada

Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2017-11-15T02:25:40Z

Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...

kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib

2017-11-09T23:03:07Z

If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom//. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada Acked-by: Arnd Bergmann [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring