wireguard-linux/arch/mips/kernel/kprobes.c, branch jd/unified-crypt-queue

mm, kprobes: generalize and rename notify_page_fault() as kprobe_page_fault()

2019-07-17T02:23:22Z

Architectures which support kprobes have very similar boilerplate around calling kprobe_fault_handler(). Use a helper function in kprobes.h to unify them, based on the x86 code. This changes the behaviour for other architectures when preemption is enabled. Previously, they would have disabled preemption while calling the kprobe handler. However, preemption would be disabled if this fault was due to a kprobe, so we know the fault was not due to a kprobe handler and can simply return failure. This behaviour was introduced in commit a980c0ef9f6d ("x86/kprobes: Refactor kprobes_fault() like kprobe_exceptions_notify()") [anshuman.khandual@arm.com: export kprobe_fault_handler()] Link: http://lkml.kernel.org/r/1561133358-8876-1-git-send-email-anshuman.khandual@arm.com Link: http://lkml.kernel.org/r/1560420444-25737-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual Reviewed-by: Dave Hansen Cc: Michal Hocko Cc: Matthew Wilcox Cc: Mark Rutland Cc: Christophe Leroy Cc: Stephen Rothwell Cc: Andrey Konovalov Cc: Michael Ellerman Cc: Paul Mackerras Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Tony Luck Cc: Fenghua Yu Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Yoshinori Sato Cc: "David S. Miller" Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Andy Lutomirski Cc: Vineet Gupta Cc: James Hogan Cc: Paul Burton Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2019-07-09T04:48:15Z

Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 167

2019-05-30T18:26:39Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 83 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Richard Fontana Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.021731668@linutronix.de Signed-off-by: Greg Kroah-Hartman

signal: Remove task parameter from force_sig

2019-05-27T14:36:28Z

All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman"

bpf/error-inject/kprobes: Clear current_kprobe and enable preempt in kprobe

2018-06-21T10:33:19Z

Clear current_kprobe and enable preemption in kprobe even if pre_handler returns !0. This simplifies function override using kprobes. Jprobe used to require to keep the preemption disabled and keep current_kprobe until it returned to original function entry. For this reason kprobe_int3_handler() and similar arch dependent kprobe handers checks pre_handler result and exit without enabling preemption if the result is !0. After removing the jprobe, Kprobes does not need to keep preempt disabled even if user handler returns !0 anymore. But since the function override handler in error-inject and bpf is also returns !0 if it overrides a function, to balancing the preempt count, it enables preemption and reset current kprobe by itself. That is a bad design that is very buggy. This fixes such unbalanced preempt-count and current_kprobes setting in kprobes, bpf and error-inject. Note: for powerpc and x86, this removes all preempt_disable from kprobe_ftrace_handler because ftrace callbacks are called under preempt disabled. Signed-off-by: Masami Hiramatsu Acked-by: Thomas Gleixner Acked-by: Naveen N. Rao Cc: Alexei Starovoitov Cc: Ananth N Mavinakayanahalli Cc: Andrew Morton Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: David S. Miller Cc: Fenghua Yu Cc: Heiko Carstens Cc: James Hogan Cc: Josef Bacik Cc: Linus Torvalds Cc: Martin Schwidefsky Cc: Michael Ellerman Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Ralf Baechle Cc: Rich Felker Cc: Russell King Cc: Steven Rostedt Cc: Tony Luck Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/lkml/152942494574.15209.12323837825873032258.stgit@devbox Signed-off-by: Ingo Molnar

MIPS/kprobes: Don't call the ->break_handler() in MIPS kprobes code

2018-06-21T10:33:16Z

Don't call the ->break_handler() from the MIPS kprobes code, because it was only used by jprobes which got removed. Signed-off-by: Masami Hiramatsu Acked-by: Thomas Gleixner Cc: Ananth N Mavinakayanahalli Cc: Andrew Morton Cc: James Hogan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Ralf Baechle Cc: Steven Rostedt Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Link: https://lore.kernel.org/lkml/152942482953.15209.843924518200700137.stgit@devbox Signed-off-by: Ingo Molnar

MIPS/kprobes: Remove jprobe implementation

2018-06-21T10:33:09Z

Remove arch dependent setjump/longjump functions and unused fields in kprobe_ctlblk for jprobes from arch/mips. Signed-off-by: Masami Hiramatsu Acked-by: Thomas Gleixner Cc: Ananth N Mavinakayanahalli Cc: Andrew Morton Cc: James Hogan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Ralf Baechle Cc: Steven Rostedt Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Link: https://lore.kernel.org/lkml/152942451058.15209.3459785416221980965.stgit@devbox Signed-off-by: Ingo Molnar

MIPS: tracing: disable uprobe/kprobe on compact branch instructions

2016-10-06T15:37:40Z

Current instruction decoder for uprobe/kprobe handler only handles branches with delay slots. For compact branches the behaviour is rather unpredictable - and depending on the encoding of a compact branch instruction may result in one (or more) of: - executing an instruction that follows a branch which wasn't in a delay slot and shouldn't have been executed - incorrectly emulating a branch leading to a jump to a wrong location - unexpected branching out of the single-stepped code and never reaching the breakpoint that should terminate the probe handler Results of these actions are generally unpredictable, but can end up with a probed application or kernel crash, so disable placing probes on compact branches until they are handled properly. Signed-off-by: Marcin Nowakowski Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14336/ Signed-off-by: Ralf Baechle

MIPS: tracing: move insn_has_delay_slot to a shared header

2016-10-06T15:36:39Z

Currently both kprobes and uprobes code have definitions of the insn_has_delay_slot method. Move it to a separate header as an inline method that each probe-specific method can later use. No functional change intended, although the methods slightly varied in the constraints they set for the methods - the uprobes one was chosen as it is slightly more specific when filtering opcode fields. Signed-off-by: Marcin Nowakowski Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14335/ Signed-off-by: Ralf Baechle

mips: Replace __get_cpu_var uses

2014-08-26T17:45:51Z

__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Ralf Baechle Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo