wireguard-linux/arch/mips/mm, branch jd/unified-crypt-queue

mm/vma: append unlikely() while testing VMA access permissions

2020-04-07T17:43:38Z

It is unlikely that an inaccessible VMA without required permission flags will get a page fault. Hence lets just append unlikely() directive to such checks in order to improve performance while also standardizing it across various platforms. Signed-off-by: Anshuman Khandual Signed-off-by: Andrew Morton Reviewed-by: Andrew Morton Cc: Guo Ren Cc: Geert Uytterhoeven Cc: Ralf Baechle Cc: Paul Burton Cc: Mike Rapoport Link: http://lkml.kernel.org/r/1582525304-32113-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds

mm/vma: make vma_is_accessible() available for general use

2020-04-07T17:43:37Z

Lets move vma_is_accessible() helper to include/linux/mm.h which makes it available for general use. While here, this replaces all remaining open encodings for VMA access check with vma_is_accessible(). Signed-off-by: Anshuman Khandual Signed-off-by: Andrew Morton Acked-by: Geert Uytterhoeven Acked-by: Guo Ren Acked-by: Vlastimil Babka Cc: Guo Ren Cc: Geert Uytterhoeven Cc: Ralf Baechle Cc: Paul Burton Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Yoshinori Sato Cc: Rich Felker Cc: Dave Hansen Cc: Andy Lutomirski Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Steven Rostedt Cc: Mel Gorman Cc: Alexander Viro Cc: "Aneesh Kumar K.V" Cc: Arnaldo Carvalho de Melo Cc: Arnd Bergmann Cc: Nick Piggin Cc: Paul Mackerras Cc: Will Deacon Link: http://lkml.kernel.org/r/1582520593-30704-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds

Merge tag 'dma-mapping-5.7' of git://git.infradead.org/users/hch/dma-mapping

2020-04-04T17:12:47Z

Pull dma-mapping updates from Christoph Hellwig: - fix an integer overflow in the coherent pool (Kevin Grandemange) - provide support for in-place uncached remapping and use that for openrisc - fix the arm coherent allocator to take the bus limit into account * tag 'dma-mapping-5.7' of git://git.infradead.org/users/hch/dma-mapping: ARM/dma-mapping: merge __dma_supported into arm_dma_supported ARM/dma-mapping: take the bus limit into account in __dma_alloc ARM/dma-mapping: remove get_coherent_dma_mask openrisc: use the generic in-place uncached DMA allocator dma-direct: provide a arch_dma_clear_uncached hook dma-direct: make uncached_kernel_address more general dma-direct: consolidate the error handling in dma_direct_alloc_pages dma-direct: remove the cached_kernel_address hook dma-coherent: fix integer overflow in the reserved-memory dma allocation

mm: allow VM_FAULT_RETRY for multiple times

2020-04-02T16:35:30Z

The idea comes from a discussion between Linus and Andrea [1]. Before this patch we only allow a page fault to retry once. We achieved this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing handle_mm_fault() the second time. This was majorly used to avoid unexpected starvation of the system by looping over forever to handle the page fault on a single page. However that should hardly happen, and after all for each code path to return a VM_FAULT_RETRY we'll first wait for a condition (during which time we should possibly yield the cpu) to happen before VM_FAULT_RETRY is really returned. This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY flag when we receive VM_FAULT_RETRY. It means that the page fault handler now can retry the page fault for multiple times if necessary without the need to generate another page fault event. Meanwhile we still keep the FAULT_FLAG_TRIED flag so page fault handler can still identify whether a page fault is the first attempt or not. Then we'll have these combinations of fault flags (only considering ALLOW_RETRY flag and TRIED flag): - ALLOW_RETRY and !TRIED: this means the page fault allows to retry, and this is the first try - ALLOW_RETRY and TRIED: this means the page fault allows to retry, and this is not the first try - !ALLOW_RETRY and !TRIED: this means the page fault does not allow to retry at all - !ALLOW_RETRY and TRIED: this is forbidden and should never be used In existing code we have multiple places that has taken special care of the first condition above by checking against (fault_flags & FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect the first retry of a page fault by checking against both (fault_flags & FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now even the 2nd try will have the ALLOW_RETRY set, then use that helper in all existing special paths. One example is in __lock_page_or_retry(), now we'll drop the mmap_sem only in the first attempt of page fault and we'll keep it in follow up retries, so old locking behavior will be retained. This will be a nice enhancement for current code [2] at the same time a supporting material for the future userfaultfd-writeprotect work, since in that work there will always be an explicit userfault writeprotect retry for protected pages, and if that cannot resolve the page fault (e.g., when userfaultfd-writeprotect is used in conjunction with swapped pages) then we'll possibly need a 3rd retry of the page fault. It might also benefit other potential users who will have similar requirement like userfault write-protection. GUP code is not touched yet and will be covered in follow up patch. Please read the thread below for more information. [1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/ [2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/ Suggested-by: Linus Torvalds Suggested-by: Andrea Arcangeli Signed-off-by: Peter Xu Signed-off-by: Andrew Morton Tested-by: Brian Geffon Cc: Bobby Powers Cc: David Hildenbrand Cc: Denis Plotnikov Cc: "Dr . David Alan Gilbert" Cc: Hugh Dickins Cc: Jerome Glisse Cc: Johannes Weiner Cc: "Kirill A . Shutemov" Cc: Martin Cracauer Cc: Marty McFadden Cc: Matthew Wilcox Cc: Maya Gokhale Cc: Mel Gorman Cc: Mike Kravetz Cc: Mike Rapoport Cc: Pavel Emelyanov Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com Signed-off-by: Linus Torvalds

mm: introduce FAULT_FLAG_DEFAULT

2020-04-02T16:35:29Z

Although there're tons of arch-specific page fault handlers, most of them are still sharing the same initial value of the page fault flags. Say, merely all of the page fault handlers would allow the fault to be retried, and they also allow the fault to respond to SIGKILL. Let's define a default value for the fault flags to replace those initial page fault flags that were copied over. With this, it'll be far easier to introduce new fault flag that can be used by all the architectures instead of touching all the archs. Signed-off-by: Peter Xu Signed-off-by: Andrew Morton Tested-by: Brian Geffon Reviewed-by: David Hildenbrand Cc: Andrea Arcangeli Cc: Bobby Powers Cc: Denis Plotnikov Cc: "Dr . David Alan Gilbert" Cc: Hugh Dickins Cc: Jerome Glisse Cc: Johannes Weiner Cc: "Kirill A . Shutemov" Cc: Martin Cracauer Cc: Marty McFadden Cc: Matthew Wilcox Cc: Maya Gokhale Cc: Mel Gorman Cc: Mike Kravetz Cc: Mike Rapoport Cc: Pavel Emelyanov Link: http://lkml.kernel.org/r/20200220160238.9694-1-peterx@redhat.com Signed-off-by: Linus Torvalds

mm: introduce fault_signal_pending()

2020-04-02T16:35:29Z

For most architectures, we've got a quick path to detect fatal signal after a handle_mm_fault(). Introduce a helper for that quick path. It cleans the current codes a bit so we don't need to duplicate the same check across archs. More importantly, this will be an unified place that we handle the signal immediately right after an interrupted page fault, so it'll be much easier for us if we want to change the behavior of handling signals later on for all the archs. Note that currently only part of the archs are using this new helper, because some archs have their own way to handle signals. In the follow up patches, we'll try to apply this helper to all the rest of archs. Another note is that the "regs" parameter in the new helper is not used yet. It'll be used very soon. Now we kept it in this patch only to avoid touching all the archs again in the follow up patches. [peterx@redhat.com: fix sparse warnings] Link: http://lkml.kernel.org/r/20200311145921.GD479302@xz-x1 Signed-off-by: Peter Xu Signed-off-by: Andrew Morton Tested-by: Brian Geffon Cc: Andrea Arcangeli Cc: Bobby Powers Cc: David Hildenbrand Cc: Denis Plotnikov Cc: "Dr . David Alan Gilbert" Cc: Hugh Dickins Cc: Jerome Glisse Cc: Johannes Weiner Cc: "Kirill A . Shutemov" Cc: Martin Cracauer Cc: Marty McFadden Cc: Matthew Wilcox Cc: Maya Gokhale Cc: Mel Gorman Cc: Mike Kravetz Cc: Mike Rapoport Cc: Pavel Emelyanov Link: http://lkml.kernel.org/r/20200220155353.8676-4-peterx@redhat.com Signed-off-by: Linus Torvalds

MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3

2020-03-25T15:07:14Z

LDDIR/LDPTE is Loongson-3's acceleration for Page Table Walking. If BD (Base Directory, the 4th page directory) is not enabled, then GDOffset is biased by BadVAddr[63:62]. So, if GDOffset (aka. BadVAddr[47:36] for Loongson-3) is big enough, "0b11(BadVAddr[63:62])|BadVAddr[47:36]|...." can far beyond pg_swapper_dir. This means the pg_swapper_dir may NOT be accessed by LDDIR correctly, so fix it by set PWDirExt in CP0_PWCtl. Cc: Signed-off-by: Pei Huang Signed-off-by: Huacai Chen Signed-off-by: Thomas Bogendoerfer

MIPS: c-r4k: Invalidate BMIPS5000 ZSCM prefetch lines

2020-03-16T15:09:56Z

Zephyr secondary cache is 256KB, 128B lines. 32B sectors. A secondary cache line can contain two instruction cache lines (64B), or four data cache lines (32B). Hardware prefetch Cache detects stream access, and prefetches ahead of processor access. Add support to invalidate BMIPS5000 cpu zephyr secondary cache module (ZSCM) on DMA from device so that data returned is coherent during DMA read operations. Signed-off-by: Kamal Dasu Reviewed-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer

dma-direct: make uncached_kernel_address more general

2020-03-16T09:48:09Z

Rename the symbol to arch_dma_set_uncached, and pass a size to it as well as allow an error return. That will allow reusing this hook for in-place pagetable remapping. As the in-place remap doesn't always require an explicit cache flush, also detangle ARCH_HAS_DMA_PREP_COHERENT from ARCH_HAS_DMA_SET_UNCACHED. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

dma-direct: remove the cached_kernel_address hook

2020-03-16T09:48:02Z

dma-direct now finds the kernel address for coherent allocations based on the dma address, so the cached_kernel_address hooks is unused and can be removed entirely. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy