wireguard-linux/arch/mips, branch jd/bump-compilers

net: add SO_DEVMEM_DONTNEED setsockopt to release RX frags

2024-09-12T03:44:32Z

Add an interface for the user to notify the kernel that it is done reading the devmem dmabuf frags returned as cmsg. The kernel will drop the reference on the frags to make them available for reuse. Signed-off-by: Willem de Bruijn Signed-off-by: Kaiyuan Zhang Signed-off-by: Mina Almasry Reviewed-by: Pavel Begunkov Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20240910171458.219195-11-almasrymina@google.com Signed-off-by: Jakub Kicinski

tcp: RX path for devmem TCP

2024-09-12T03:44:32Z

In tcp_recvmsg_locked(), detect if the skb being received by the user is a devmem skb. In this case - if the user provided the MSG_SOCK_DEVMEM flag - pass it to tcp_recvmsg_devmem() for custom handling. tcp_recvmsg_devmem() copies any data in the skb header to the linear buffer, and returns a cmsg to the user indicating the number of bytes returned in the linear buffer. tcp_recvmsg_devmem() then loops over the unaccessible devmem skb frags, and returns to the user a cmsg_devmem indicating the location of the data in the dmabuf device memory. cmsg_devmem contains this information: 1. the offset into the dmabuf where the payload starts. 'frag_offset'. 2. the size of the frag. 'frag_size'. 3. an opaque token 'frag_token' to return to the kernel when the buffer is to be released. The pages awaiting freeing are stored in the newly added sk->sk_user_frags, and each page passed to userspace is get_page()'d. This reference is dropped once the userspace indicates that it is done reading this page. All pages are released when the socket is destroyed. Signed-off-by: Willem de Bruijn Signed-off-by: Kaiyuan Zhang Signed-off-by: Mina Almasry Reviewed-by: Pavel Begunkov Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20240910171458.219195-10-almasrymina@google.com Signed-off-by: Jakub Kicinski

Revert "MIPS: csrc-r4k: Apply verification clocksource flags"

2024-08-25T22:26:30Z

This reverts commit 7190401fc56fb5f02ee3d04476778ab000bbaf32. Verifying the clock source sometimes deems the MIPS clock to be unstable, at least in qemu. clocksource: timekeeping watchdog on CPU0: Marking clocksource 'MIPS' as unstable because the skew is too large: clocksource: 'jiffies' wd_nsec: 500000000 wd_now: ffff8bde wd_last: ffff8bac mask: ffffffff clocksource: 'MIPS' cs_nsec: 940634468 cs_now: 310181c4 cs_last: 28090a09 mask: ffffffff clocksource: Clocksource 'MIPS' skewed 440634468 ns (440 ms) over watchdog 'jiffies' interval of 500000000 ns (500 ms) clocksource: 'MIPS' is current clocksource. If this happens, network interfaces fail to come online. Signed-off-by: Guenter Roeck

Merge tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2024-08-24T02:10:43Z

Pull MIPS fixes from Thomas Bogendoerfer: - Set correct timer mode on Loongson64 - Only request r4k clockevent interrupt on one CPU * tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed MIPS: Loongson64: Set timer mode in cpu-probe

MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed

2024-08-20T08:36:52Z

This avoids warning: [ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 Caused by get_c0_compare_int on secondary CPU. We also skipped saving IRQ number to struct clock_event_device *cd as it's never used by clockevent core, as per comments it's only meant for "non CPU local devices". Reported-by: Serge Semin Closes: https://lore.kernel.org/linux-mips/6szkkqxpsw26zajwysdrwplpjvhl5abpnmxgu2xuj3dkzjnvsf@4daqrz4mf44k/ Signed-off-by: Jiaxun Yang Reviewed-by: Philippe Mathieu-Daudé Reviewed-by: Serge Semin Tested-by: Serge Semin Signed-off-by: Thomas Bogendoerfer

mips: sgi-ip22: Fix the build

2024-08-13T09:34:55Z

Fix a recently introduced build failure. Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *") Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20240805232026.65087-3-bvanassche@acm.org Signed-off-by: Greg Kroah-Hartman

MIPS: Loongson64: Set timer mode in cpu-probe

2024-08-08T16:17:43Z

Loongson64 C and G processors have EXTIMER feature which is conflicting with CP0 counter. Although the processor resets in EXTIMER disabled & INTIMER enabled mode, which is compatible with MIPS CP0 compare, firmware may attempt to enable EXTIMER and interfere CP0 compare. Set timer mode back to MIPS compatible mode to fix booting on systems with such firmware before we have an actual driver for EXTIMER. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang Signed-off-by: Thomas Bogendoerfer

Merge tag 'mips_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2024-07-25T19:41:53Z

Pull MIPS updates from Thomas Bogendoerfer: - Use improved timer sync for Loongson64 - Fix address of GCR_ACCESS register - Add missing MODULE_DESCRIPTION * tag 'mips_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: sibyte: add missing MODULE_DESCRIPTION() macro MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later MIPS: Loongson64: Switch to SYNC_R4K

Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2024-07-23T21:32:21Z

Pull Kbuild updates from Masahiro Yamada: - Remove tristate choice support from Kconfig - Stop using the PROVIDE() directive in the linker script - Reduce the number of links for the combination of CONFIG_KALLSYMS and CONFIG_DEBUG_INFO_BTF - Enable the warning for symbol reference to .exit.* sections by default - Fix warnings in RPM package builds - Improve scripts/make_fit.py to generate a FIT image with separate base DTB and overlays - Improve choice value calculation in Kconfig - Fix conditional prompt behavior in choice in Kconfig - Remove support for the uncommon EMAIL environment variable in Debian package builds - Remove support for the uncommon "name " form for the DEBEMAIL environment variable - Raise the minimum supported GNU Make version to 4.0 - Remove stale code for the absolute kallsyms - Move header files commonly used for host programs to scripts/include/ - Introduce the pacman-pkg target to generate a pacman package used in Arch Linux - Clean up Kconfig * tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits) kbuild: doc: gcc to CC change kallsyms: change sym_entry::percpu_absolute to bool type kallsyms: unify seq and start_pos fields of struct sym_entry kallsyms: add more original symbol type/name in comment lines kallsyms: use \t instead of a tab in printf() kallsyms: avoid repeated calculation of array size for markers kbuild: add script and target to generate pacman package modpost: use generic macros for hash table implementation kbuild: move some helper headers from scripts/kconfig/ to scripts/include/ Makefile: add comment to discourage tools/* addition for kernel builds kbuild: clean up scripts/remove-stale-files kconfig: recursive checks drop file/lineno kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec kallsyms: get rid of code for absolute kallsyms kbuild: Create INSTALL_PATH directory if it does not exist kbuild: Abort make on install failures kconfig: remove 'e1' and 'e2' macros from expression deduplication kconfig: remove SYMBOL_CHOICEVAL flag kconfig: add const qualifiers to several function arguments kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups() ...

mips: sibyte: add missing MODULE_DESCRIPTION() macro

2024-07-23T07:47:40Z

Since commit 1fffe7a34c89 ("script: modpost: emit a warning when the description is missing"), a module without a MODULE_DESCRIPTION() will result in a warning with make W=1. The following warning is being observed when ARCH=mips and CONFIG_SIBYTE_TBPROF=m: WARNING: modpost: missing MODULE_DESCRIPTION() in arch/mips/sibyte/common/sb_tbprof.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson Signed-off-by: Thomas Bogendoerfer