wireguard-linux/arch/nios2/boot/dts, branch jd/unified-crypt-queue

arch: nios2: remove 'resetvalue' property

2020-04-10T17:46:04Z

The 'altr,pio-1.0' driver does not handle the 'resetvalue', so remove it. Signed-off-by: Alexandru Ardelean Signed-off-by: Ley Foon Tan

arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'

2020-04-10T17:45:52Z

There is no more 'altr,gpio-bank-width' in the 'altr,pio-1.0' driver. There is a 'altr,ngpio' which is what the property wants to configure. This change updates all occurrences of 'altr,gpio-bank-width' to 'altr,ngpio'. Signed-off-by: Alexandru Ardelean Signed-off-by: Ley Foon Tan

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

2019-05-30T18:29:52Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Steve Winslow Reviewed-by: Richard Fontana Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13

2019-05-21T09:28:45Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Kate Stewart Reviewed-by: Jilayne Lovejoy Reviewed-by: Steve Winslow Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman

nios2: fix building all dtbs

2018-10-02T14:22:49Z

nios2 has a 'dtbs' target, but nothing is added to 'dtb-*' targets and no dtbs were getting built. This enables building all the dts files in arch/nios2/boot/dts/ when COMPILE_TEST and OF_ALL_DTBS are enabled. Cc: Ley Foon Tan Cc: nios2-dev@lists.rocketboards.org Signed-off-by: Rob Herring

nios2: use common rules to build built-in dtb

2018-10-02T14:22:49Z

Using the common build support for built-in dtb files just requires adding a .dtb.o target to obj-y. This has the side effect that CONFIG_NIOS2_DTB_SOURCE should now be just the dts filename in arch/nios2/boot/dts/ directory. Before any path was supported, but if you want to build in your dtb to the kernel, it should be in the kernel tree. Cc: Ley Foon Tan Cc: nios2-dev@lists.rocketboards.org Signed-off-by: Rob Herring

nios2: build .dtb files in dts directory

2018-10-02T14:22:49Z

Align nios2 with other architectures which build the dtb files in the same directory as the dts files. This is also in line with most other build targets which are located in the same directory as the source. This move will help enable the 'dtbs' target which builds all the dtbs regardless of kernel config. This transition could break some scripts if they expect dtb files in the old location. Cc: Ley Foon Tan Cc: nios2-dev@lists.rocketboards.org Signed-off-by: Rob Herring

nios2: dts: Remove leading 0x and 0s from bindings notation

2018-02-11T15:04:47Z

Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney Suggested-by: Rob Herring Signed-off-by: Mathieu Malaterre Acked-by: Ley Foon Tan

nios2: add earlycon support to 3c120 devboard DTS

2017-09-15T12:30:52Z

Allow earlycon to be used on the JTAG UART present in the 3c120 GHRD. Signed-off-by: Tobias Klauser

nios2: enable earlycon support

2017-05-08T08:59:19Z

Enable generic earlycon support for nios2. This e.g. allows to use a 8250/16650 UART as earlycon. In order to get the earlycon, we just need to call parse_early_param() in early_init_devtree() as soon as the device tree is initially scanned. By adding an stdout-path property to the dts (done in this patch for 10m50_devboard), the earlycon can be used. In order to provide early printk support, we need to provide a dummy implementation of early_console_write(), so that arch/nios2/kernel/early_printk.c can still be compiled if neither SERIAL_ALTERA_JTAGUART_CONSOLE nor SERIAL_ALTERA_UART_CONSOLE is selected. As soon as the altera_uart and altera_jtaguart support earlycon, the entire file can be removed. Tested-by: Guenter Roeck Signed-off-by: Tobias Klauser Acked-by: Ley Foon Tan