wireguard-linux/arch/powerpc/include/asm/xive.h, branch jd/unified-crypt-queue

powerpc/xive: Drop extern qualifiers from header function prototypes

2020-01-23T10:31:23Z

As reported by ./scripts/checkpatch.pl --strict: CHECK: extern prototypes should be avoided in .h files Signed-off-by: Greg Kurz Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/157384145834.181768.944827793193636924.stgit@bahia.lan

Merge tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2019-09-20T18:48:06Z

Pull powerpc updates from Michael Ellerman: "This is a bit late, partly due to me travelling, and partly due to a power outage knocking out some of my test systems *while* I was travelling. - Initial support for running on a system with an Ultravisor, which is software that runs below the hypervisor and protects guests against some attacks by the hypervisor. - Support for building the kernel to run as a "Secure Virtual Machine", ie. as a guest capable of running on a system with an Ultravisor. - Some changes to our DMA code on bare metal, to allow devices with medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space. - Support for firmware assisted crash dumps on bare metal (powernv). - Two series fixing bugs in and refactoring our PCI EEH code. - A large series refactoring our exception entry code to use gas macros, both to make it more readable and also enable some future optimisations. As well as many cleanups and other minor features & fixups. Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar, Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde" * tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits) powerpc/mm/mce: Keep irqs disabled during lockless page table walk powerpc: Use ftrace_graph_ret_addr() when unwinding powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR ftrace: Look up the address of return_to_handler() using helpers powerpc: dump kernel log before carrying out fadump or kdump docs: powerpc: Add missing documentation reference powerpc/xmon: Fix output of XIVE IPI powerpc/xmon: Improve output of XIVE interrupts powerpc/mm/radix: remove useless kernel messages powerpc/fadump: support holes in kernel boot memory area powerpc/fadump: remove RMA_START and RMA_END macros powerpc/fadump: update documentation about option to release opalcore powerpc/fadump: consider f/w load area powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel powerpc/fadump: improve how crashed kernel's memory is reserved powerpc/fadump: consider reserved ranges while releasing memory powerpc/fadump: make crash memory ranges array allocation generic ...

powerpc/xmon: Improve output of XIVE interrupts

2019-09-13T14:58:47Z

When looping on the list of interrupts, add the current value of the PQ bits with a load on the ESB page. This has the side effect of faulting the ESB page of all interrupts. Signed-off-by: Cédric Le Goater Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190910081850.26038-2-clg@kaod.org

KVM: PPC: Book3S: Enable XIVE native capability only if OPAL has required functions

2019-08-27T01:45:49Z

There are some POWER9 machines where the OPAL firmware does not support the OPAL_XIVE_GET_QUEUE_STATE and OPAL_XIVE_SET_QUEUE_STATE calls. The impact of this is that a guest using XIVE natively will not be able to be migrated successfully. On the source side, the get_attr operation on the KVM native device for the KVM_DEV_XIVE_GRP_EQ_CONFIG attribute will fail; on the destination side, the set_attr operation for the same attribute will fail. This adds tests for the existence of the OPAL get/set queue state functions, and if they are not supported, the XIVE-native KVM device is not created and the KVM_CAP_PPC_IRQ_XIVE capability returns false. Userspace can then either provide a software emulation of XIVE, or else tell the guest that it does not have a XIVE controller available to it. Cc: stable@vger.kernel.org # v5.2+ Fixes: 3fab2d10588e ("KVM: PPC: Book3S HV: XIVE: Activate XIVE exploitation mode") Reviewed-by: David Gibson Reviewed-by: Cédric Le Goater Signed-off-by: Paul Mackerras

powerpc/xive: Fix dump of XIVE interrupt under pseries

2019-08-19T03:20:24Z

The xmon 'dxi' command calls OPAL to query the XIVE configuration of a interrupt. This can only be done on baremetal (PowerNV) and it will crash a pseries machine. Introduce a new XIVE get_irq_config() operation which implements a different query depending on the platform, PowerNV or pseries, and modify xmon to use a top level wrapper. Signed-off-by: Cédric Le Goater Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190814154754.23682-3-clg@kaod.org

powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race

2019-08-16T04:16:59Z

Testing has revealed the existence of a race condition where a XIVE interrupt being shut down can be in one of the XIVE interrupt queues (of which there are up to 8 per CPU, one for each priority) at the point where free_irq() is called. If this happens, can return an interrupt number which has been shut down. This can lead to various symptoms: - irq_to_desc(irq) can be NULL. In this case, no end-of-interrupt function gets called, resulting in the CPU's elevated interrupt priority (numerically lowered CPPR) never gets reset. That then means that the CPU stops processing interrupts, causing device timeouts and other errors in various device drivers. - The irq descriptor or related data structures can be in the process of being freed as the interrupt code is using them. This typically leads to crashes due to bad pointer dereferences. This race is basically what commit 62e0468650c3 ("genirq: Add optional hardware synchronization for shutdown", 2019-06-28) is intended to fix, given a get_irqchip_state() method for the interrupt controller being used. It works by polling the interrupt controller when an interrupt is being freed until the controller says it is not pending. With XIVE, the PQ bits of the interrupt source indicate the state of the interrupt source, and in particular the P bit goes from 0 to 1 at the point where the hardware writes an entry into the interrupt queue that this interrupt is directed towards. Normally, the code will then process the interrupt and do an end-of-interrupt (EOI) operation which will reset PQ to 00 (assuming another interrupt hasn't been generated in the meantime). However, there are situations where the code resets P even though a queue entry exists (for example, by setting PQ to 01, which disables the interrupt source), and also situations where the code leaves P at 1 after removing the queue entry (for example, this is done for escalation interrupts so they cannot fire again until they are explicitly re-enabled). The code already has a 'saved_p' flag for the interrupt source which indicates that a queue entry exists, although it isn't maintained consistently. This patch adds a 'stale_p' flag to indicate that P has been left at 1 after processing a queue entry, and adds code to set and clear saved_p and stale_p as necessary to maintain a consistent indication of whether a queue entry may or may not exist. With this, we can implement xive_get_irqchip_state() by looking at stale_p, saved_p and the ESB PQ bits for the interrupt. There is some additional code to handle escalation interrupts properly; because they are enabled and disabled in KVM assembly code, which does not have access to the xive_irq_data struct for the escalation interrupt. Hence, stale_p may be incorrect when the escalation interrupt is freed in kvmppc_xive_{,native_}cleanup_vcpu(). Fortunately, we can fix it up by looking at vcpu->arch.xive_esc_on, with some careful attention to barriers in order to ensure the correct result if xive_esc_irq() races with kvmppc_xive_cleanup_vcpu(). Finally, this adds code to make noise on the console (pr_crit and WARN_ON(1)) if we find an interrupt queue entry for an interrupt which does not have a descriptor. While this won't catch the race reliably, if it does get triggered it will be an indication that the race is occurring and needs to be debugged. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Paul Mackerras Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190813100648.GE9567@blackberry

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

KVM: PPC: Book3S HV: XIVE: Add a TIMA mapping

2019-04-30T09:35:16Z

Each thread has an associated Thread Interrupt Management context composed of a set of registers. These registers let the thread handle priority management and interrupt acknowledgment. The most important are : - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) They are exposed to software in four different pages each proposing a view with a different privilege. The first page is for the physical thread context and the second for the hypervisor. Only the third (operating system) and the fourth (user level) are exposed the guest. A custom VM fault handler will populate the VMA with the appropriate pages, which should only be the OS page for now. Signed-off-by: Cédric Le Goater Reviewed-by: David Gibson Signed-off-by: Paul Mackerras

KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration

2019-04-30T09:35:16Z

These controls will be used by the H_INT_SET_QUEUE_CONFIG and H_INT_GET_QUEUE_CONFIG hcalls from QEMU to configure the underlying Event Queue in the XIVE IC. They will also be used to restore the configuration of the XIVE EQs and to capture the internal run-time state of the EQs. Both 'get' and 'set' rely on an OPAL call to access the EQ toggle bit and EQ index which are updated by the XIVE IC when event notifications are enqueued in the EQ. The value of the guest physical address of the event queue is saved in the XIVE internal xive_q structure for later use. That is when migration needs to mark the EQ pages dirty to capture a consistent memory state of the VM. To be noted that H_INT_SET_QUEUE_CONFIG does not require the extra OPAL call setting the EQ toggle bit and EQ index to configure the EQ, but restoring the EQ state will. Signed-off-by: Cédric Le Goater Reviewed-by: David Gibson Signed-off-by: Paul Mackerras

powerpc/xive: add OPAL extensions for the XIVE native exploitation support

2019-04-11T05:31:41Z

The support for XIVE native exploitation mode in Linux/KVM needs a couple more OPAL calls to get and set the state of the XIVE internal structures being used by a sPAPR guest. Signed-off-by: Cédric Le Goater Reviewed-by: David Gibson Signed-off-by: Michael Ellerman