wireguard-linux/arch/powerpc/kernel/hw_breakpoint.c, branch jd/unified-crypt-queue

powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c

2020-04-01T03:30:49Z

ptrace_triggered() is declared in asm/hw_breakpoint.h and only needed when CONFIG_HW_BREAKPOINT is set, so move it into hw_breakpoint.c Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/8402c516023da1371953a65af7df2008758ea0c4.1582848567.git.christophe.leroy@c-s.fr

powerpc/watchpoint: Don't call dar_within_range() for Book3S

2020-02-24T00:19:35Z

DAR is set to the first byte of overlap between actual access and watched range at DSI on Book3S processor. But actual access range might or might not be within user asked range. So for Book3S, it must not call dar_within_range(). This revert portion of commit 39413ae00967 ("powerpc/hw_breakpoints: Rewrite 8xx breakpoints to allow any address range size."). Before patch: # ./tools/testing/selftests/powerpc/ptrace/perf-hwbreak ... TESTED: No overlap FAILED: Partial overlap: 0 != 2 TESTED: Partial overlap TESTED: No overlap FAILED: Full overlap: 0 != 2 failure: perf_hwbreak After patch: TESTED: No overlap TESTED: Partial overlap TESTED: Partial overlap TESTED: No overlap TESTED: Full overlap success: perf_hwbreak Fixes: 39413ae00967 ("powerpc/hw_breakpoints: Rewrite 8xx breakpoints to allow any address range size.") Reported-by: Michael Ellerman Signed-off-by: Ravi Bangoria Reviewed-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200222082049.330435-1-ravi.bangoria@linux.ibm.com

powerpc/hw_breakpoints: Rewrite 8xx breakpoints to allow any address range size.

2020-01-23T10:31:14Z

Unlike standard powerpc, Powerpc 8xx doesn't have SPRN_DABR, but it has a breakpoint support based on a set of comparators which allow more flexibility. Commit 4ad8622dc548 ("powerpc/8xx: Implement hw_breakpoint") implemented breakpoints by emulating the DABR behaviour. It did this by setting one comparator the match 4 bytes at breakpoint address and the other comparator to match 4 bytes at breakpoint address + 4. Rewrite 8xx hw_breakpoint to make breakpoints match all addresses defined by the breakpoint address and length by making full use of comparators. Now, comparator E is set to match any address greater than breakpoint address minus one. Comparator F is set to match any address lower than breakpoint address plus breakpoint length. Addresses are aligned to 32 bits. When the breakpoint range starts at address 0, the breakpoint is set to match comparator F only. When the breakpoint range end at address 0xffffffff, the breakpoint is set to match comparator E only. Otherwise the breakpoint is set to match comparator E and F. At the same time, use registers bit names instead of hardcoded values. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/05105deeaf63bc02151aea2cdeaf525534e0e9d4.1574790198.git.christophe.leroy@c-s.fr

powerpc/watchpoint: Don't ignore extraneous exceptions blindly

2019-11-13T05:58:03Z

On powerpc, watchpoint match range is double-word granular. On a watchpoint hit, DAR is set to the first byte of overlap between actual access and watched range. And thus it's quite possible that DAR does not point inside user specified range. Ex, say user creates a watchpoint with address range 0x1004 to 0x1007. So hw would be configured to watch from 0x1000 to 0x1007. If there is a 4 byte access from 0x1002 to 0x1005, DAR will point to 0x1002 and thus interrupt handler considers it as extraneous, but it's actually not, because part of the access belongs to what user has asked. Instead of blindly ignoring the exception, get actual address range by analysing an instruction, and ignore only if actual range does not overlap with user specified range. Note: The behavior is unchanged for 8xx. Signed-off-by: Ravi Bangoria Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20191017093204.7511-5-ravi.bangoria@linux.ibm.com

powerpc/watchpoint: Fix length calculation for unaligned target

2019-11-13T05:58:03Z

Watchpoint match range is always doubleword(8 bytes) aligned on powerpc. If the given range is crossing doubleword boundary, we need to increase the length such that next doubleword also get covered. Ex, address len = 6 bytes |=========. |------------v--|------v--------| | | | | | | | | | | | | | | | | | |---------------|---------------| <---8 bytes---> In such case, current code configures hw as: start_addr = address & ~HW_BREAKPOINT_ALIGN len = 8 bytes And thus read/write in last 4 bytes of the given range is ignored. Fix this by including next doubleword in the length. Signed-off-by: Ravi Bangoria Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20191017093204.7511-3-ravi.bangoria@linux.ibm.com

powerpc/watchpoint: Introduce macros for watchpoint length

2019-11-13T05:58:02Z

We are hadrcoding length everywhere in the watchpoint code. Introduce macros for the length and use them. Signed-off-by: Ravi Bangoria Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20191017093204.7511-2-ravi.bangoria@linux.ibm.com

powerpc/watchpoint: Disable watchpoint hit by larx/stcx instructions

2019-09-11T23:27:00Z

If watchpoint exception is generated by larx/stcx instructions, the reservation created by larx gets lost while handling exception, and thus stcx instruction always fails. Generally these instructions are used in a while(1) loop, for example spinlocks. And because stcx never succeeds, it loops forever and ultimately hangs the system. Note that ptrace anyway works in one-shot mode and thus for ptrace we don't change the behaviour. It's up to ptrace user to take care of this. Signed-off-by: Ravi Bangoria Acked-by: Naveen N. Rao Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190910131513.30499-1-ravi.bangoria@linux.ibm.com

powerpc/hw_breakpoint: move instruction stepping out of hw_breakpoint_handler()

2019-08-20T11:22:10Z

On 8xx, breakpoints stop after executing the instruction, so stepping/emulation is not needed. Move it into a sub-function and remove the #ifdefs. Signed-off-by: Christophe Leroy Reviewed-by: Ravi Bangoria Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/f8cdc3f1c66ad3c43ebc568abcc6c39ed4676284.1561737231.git.christophe.leroy@c-s.fr

Merge tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2019-07-13T23:08:36Z

Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...

powerpc: Fix compile issue with force DAWR

2019-07-03T05:19:35Z

If you compile with KVM but without CONFIG_HAVE_HW_BREAKPOINT you fail at linking with: arch/powerpc/kvm/book3s_hv_rmhandlers.o:(.text+0x708): undefined reference to `dawr_force_enable' This was caused by commit c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option"). This moves a bunch of code around to fix this. It moves a lot of the DAWR code in a new file and creates a new CONFIG_PPC_DAWR to enable compiling it. Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") Signed-off-by: Michael Neuling [mpe: Minor formatting in set_dawr()] Signed-off-by: Michael Ellerman