wireguard-linux/arch/powerpc/kernel/pci-common.c, branch jd/unified-crypt-queue

Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-04-05T18:12:59Z

Pull powerpc updates from Michael Ellerman: "Slightly late as I had to rebase mid-week to insert a bug fix: - A large series from Nick for 64-bit to further rework our exception vectors, and rewrite portions of the syscall entry/exit and interrupt return in C. The result is much easier to follow code that is also faster in general. - Cleanup of our ptrace code to split various parts out that had become badly intertwined with #ifdefs over the years. - Changes to our NUMA setup under the PowerVM hypervisor which should hopefully avoid non-sensical topologies which can lead to warnings from the workqueue code and other problems. - MAINTAINERS updates to remove some of our old orphan entries and update the status of others. - Quite a few other small changes and fixes all over the map. Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc: Make setjmp/longjmp signature standard powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type powerpc: Suppress .eh_frame generation powerpc: Drop -fno-dwarf2-cfi-asm powerpc/32: drop unused ISA_DMA_THRESHOLD powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces selftests/powerpc: Fix try-run when source tree is not writable powerpc/vmlinux.lds: Explicitly retain .gnu.hash powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c powerpc/ptrace: create ppc_gethwdinfo() powerpc/ptrace: create ptrace_get_debugreg() powerpc/ptrace: split out ADV_DEBUG_REGS related functions. powerpc/ptrace: move register viewing functions out of ptrace.c powerpc/ptrace: split out TRANSACTIONAL_MEM related functions. powerpc/ptrace: split out SPE related functions. powerpc/ptrace: split out ALTIVEC related functions. powerpc/ptrace: split out VSX related functions. powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64 powerpc/ptrace: remove unused header includes ...

powerpc/eeh: Remove eeh_add_device_tree_late()

2020-03-25T01:09:38Z

On pseries and PowerNV pcibios_bus_add_device() calls eeh_add_device_late() so there's no need to do a separate tree traversal to bind the eeh_dev and pci_dev together setting up the PHB at boot. As a result we can remove eeh_add_device_tree_late(). Reviewed-by: Sam Bobroff Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200306073904.4737-2-oohall@gmail.com

powerpc/eeh: Add sysfs files in late probe

2020-03-25T01:09:38Z

Move creating the EEH specific sysfs files into eeh_add_device_late() rather than being open-coded all over the place. Calling the function is generally done immediately after calling eeh_add_device_late() anyway. This is also a correctness fix since currently the sysfs files will be added even if the EEH probe happens to fail. Similarly, on pseries we currently add the sysfs files before calling eeh_add_device_late(). This is flat-out broken since the sysfs files require the pci_dev->dev.archdata.edev pointer to be set, and that is done in eeh_add_device_late(). Reviewed-by: Sam Bobroff Signed-off-by: Oliver O'Halloran Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200306073904.4737-1-oohall@gmail.com

powerpc: Drop using struct of_pci_range.pci_space field

2020-02-14T20:25:20Z

Let's use the struct of_pci_range.flags field instead so we can remove the pci_space field. Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring

powerpc/pci: Fold pcibios_setup_device() into pcibios_bus_add_device()

2020-01-23T10:31:21Z

pcibios_bus_add_device() is the only caller of pcibios_setup_device(). Fold them together since there's no real reason to keep them separate. Signed-off-by: Oliver O'Halloran Reviewed-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200110070207.439-2-oohall@gmail.com

powerpc/pci: Remove pcibios_setup_bus_devices()

2020-01-06T05:25:29Z

With the previous patch applied pcibios_setup_device() will always be run when pcibios_bus_add_device() is called. There are several code paths where pcibios_setup_bus_device() is still called (the PowerPC specific PCI hotplug support is one) so with just the previous patch applied the setup can be run multiple times on a device, once before the device is added to the bus and once after. There's no need to run the setup in the early case any more so just remove it entirely. Signed-off-by: Oliver O'Halloran Tested-by: Alexey Kardashevskiy Reviewed-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20191028085424.12006-3-oohall@gmail.com

powerpc/pci: Fix pcibios_setup_device() ordering

2020-01-06T05:25:28Z

Move PCI device setup from pcibios_add_device() and pcibios_fixup_bus() to pcibios_bus_add_device(). This ensures that platform-specific DMA and IOMMU setup occurs after the device has been registered in sysfs, which is a requirement for IOMMU group assignment to work This fixes IOMMU group assignment for hotplugged devices on pseries, where the existing behavior results in IOMMU assignment before registration. Thanks to Lukas Wunner for the suggestion. Signed-off-by: Shawn Anastasio Tested-by: Alexey Kardashevskiy Reviewed-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20191028085424.12006-2-oohall@gmail.com

powerpc/64: Adjust order in pcibios_init()

2019-08-22T13:11:48Z

The pcibios_init() function for PowerPC 64 currently calls pci_bus_add_devices() before pcibios_resource_survey(). This means that at boot time, when the pcibios_bus_add_device() hooks are called by pci_bus_add_devices(), device resources have not been allocated and they are unable to perform EEH setup, so a separate pass is needed. This patch adjusts that order so that it will become possible to consolidate the EEH setup work into a single location. The only functional change is to execute pcibios_resource_survey() (excepting ppc_md.pcibios_fixup(), see below) before pci_bus_add_devices() instead of after it. Because pcibios_scan_phb() and pci_bus_add_devices() are called together in a loop, this must be broken into one loop for each call. Then the call to pcibios_resource_survey() is moved up in between them. This changes the ordering but because pcibios_resource_survey() also calls ppc_md.pcibios_fixup(), that call is extracted out into pcibios_init() to where pcibios_resource_survey() was, so that it is not moved. The only other caller of pcibios_resource_survey() is the PowerPC 32 version of pcibios_init(), and therefore, that is modified to call ppc_md.pcibios_fixup() right after pcibios_resource_survey() so that there is no functional change there at all. The re-arrangement will cause very few side-effects because at this stage in the boot, pci_bus_add_devices() does very little: - pci_create_sysfs_dev_files() does nothing (no sysfs yet) - pci_proc_attach_device() does nothing (no proc yet) - device_attach() does nothing (no drivers yet) This leaves only the pci_final_fixup calls, D3 support, and marking the device as added. Of those, only the pci_final_fixup calls have the potential to be affected by resource allocation. The only pci_final_fixup handlers that touch resources seem to be one for x86 (pci_amd_enable_64bit_bar()), and a PowerPC 32 platform driver (quirk_final_uli1575()), neither of which use this pcibios_init() function. Even if they did, it would almost certainly be a bug, under the current ordering, to rely on or make changes to resources before they were allocated. Signed-off-by: Sam Bobroff Reviewed-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/4506b0489eabd0921a3587d90bd44c7683f3472d.1565930772.git.sbobroff@linux.ibm.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2019-03-07T20:56:26Z

Pull powerpc updates from Michael Ellerman: "Notable changes: - Enable THREAD_INFO_IN_TASK to move thread_info off the stack. - A big series from Christoph reworking our DMA code to use more of the generic infrastructure, as he said: "This series switches the powerpc port to use the generic swiotlb and noncoherent dma ops, and to use more generic code for the coherent direct mapping, as well as removing a lot of dead code." - Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing us to support machines with larger amounts of total RAM or distance between nodes. - Two series from Christophe, one to optimise TLB miss handlers on 6xx, and another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit CPUs. - Support for KCOV coverage instrumentation which means we can run syzkaller and discover even more bugs in our code. And as always many clean-ups, reworks and minor fixes etc. Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/32: Clear on-stack exception marker upon exception return powerpc: Remove export of save_stack_trace_tsk_reliable() powerpc/mm: fix "section_base" set but not used powerpc/mm: Fix "sz" set but not used warning powerpc/mm: Check secondary hash page table powerpc: remove nargs from __SYSCALL powerpc/64s: Fix unrelocated interrupt trampoline address test powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables powerpc/fsl: Fix the flush of branch predictor. powerpc/powernv: Make opal log only readable by root powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C powerpc/64s: Fix data interrupts vs d-side MCE reentrancy powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy powerpc/64s: system reset interrupt preserve HSRRs powerpc/64s: Fix HV NMI vs HV interrupt recoverability test powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback selftests/powerpc: Remove duplicate header powerpc sstep: Add support for modsd, modud instructions ...