wireguard-linux/arch/powerpc/kvm, branch update-toolchain

Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2024-07-26T17:26:33Z

Pull struct file leak fixes from Al Viro: "a couple of leaks on failure exits missing fdput()" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: lirc: rc_dev_get_from_fd(): fix file leak powerpc: fix a file leak in kvm_vcpu_ioctl_enable_cap()

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2024-07-20T19:41:03Z

Pull kvm updates from Paolo Bonzini: "ARM: - Initial infrastructure for shadow stage-2 MMUs, as part of nested virtualization enablement - Support for userspace changes to the guest CTR_EL0 value, enabling (in part) migration of VMs between heterogenous hardware - Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of the protocol - FPSIMD/SVE support for nested, including merged trap configuration and exception routing - New command-line parameter to control the WFx trap behavior under KVM - Introduce kCFI hardening in the EL2 hypervisor - Fixes + cleanups for handling presence/absence of FEAT_TCRX - Miscellaneous fixes + documentation updates LoongArch: - Add paravirt steal time support - Add support for KVM_DIRTY_LOG_INITIALLY_SET - Add perf kvm-stat support for loongarch RISC-V: - Redirect AMO load/store access fault traps to guest - perf kvm stat support - Use guest files for IMSIC virtualization, when available s390: - Assortment of tiny fixes which are not time critical x86: - Fixes for Xen emulation - Add a global struct to consolidate tracking of host values, e.g. EFER - Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC bus frequency, because TDX - Print the name of the APICv/AVIC inhibits in the relevant tracepoint - Clean up KVM's handling of vendor specific emulation to consistently act on "compatible with Intel/AMD", versus checking for a specific vendor - Drop MTRR virtualization, and instead always honor guest PAT on CPUs that support self-snoop - Update to the newfangled Intel CPU FMS infrastructure - Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads '0' and writes from userspace are ignored - Misc cleanups x86 - MMU: - Small cleanups, renames and refactoring extracted from the upcoming Intel TDX support - Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't hold leafs SPTEs - Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager page splitting, to avoid stalling vCPUs when splitting huge pages - Bug the VM instead of simply warning if KVM tries to split a SPTE that is non-present or not-huge. KVM is guaranteed to end up in a broken state because the callers fully expect a valid SPTE, it's all but dangerous to let more MMU changes happen afterwards x86 - AMD: - Make per-CPU save_area allocations NUMA-aware - Force sev_es_host_save_area() to be inlined to avoid calling into an instrumentable function from noinstr code - Base support for running SEV-SNP guests. API-wise, this includes a new KVM_X86_SNP_VM type, encrypting/measure the initial image into guest memory, and finalizing it before launching it. Internally, there are some gmem/mmu hooks needed to prepare gmem-allocated pages before mapping them into guest private memory ranges This includes basic support for attestation guest requests, enough to say that KVM supports the GHCB 2.0 specification There is no support yet for loading into the firmware those signing keys to be used for attestation requests, and therefore no need yet for the host to provide certificate data for those keys. To support fetching certificate data from userspace, a new KVM exit type will be needed to handle fetching the certificate from userspace. An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS exit type to handle this was introduced in v1 of this patchset, but is still being discussed by community, so for now this patchset only implements a stub version of SNP Extended Guest Requests that does not provide certificate data x86 - Intel: - Remove an unnecessary EPT TLB flush when enabling hardware - Fix a series of bugs that cause KVM to fail to detect nested pending posted interrupts as valid wake eents for a vCPU executing HLT in L2 (with HLT-exiting disable by L1) - KVM: x86: Suppress MMIO that is triggered during task switch emulation Explicitly suppress userspace emulated MMIO exits that are triggered when emulating a task switch as KVM doesn't support userspace MMIO during complex (multi-step) emulation Silently ignoring the exit request can result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace for some other reason prior to purging mmio_needed See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write exits if emulator detects exception") for more details on KVM's limitations with respect to emulated MMIO during complex emulator flows Generic: - Rename the AS_UNMOVABLE flag that was introduced for KVM to AS_INACCESSIBLE, because the special casing needed by these pages is not due to just unmovability (and in fact they are only unmovable because the CPU cannot access them) - New ioctl to populate the KVM page tables in advance, which is useful to mitigate KVM page faults during guest boot or after live migration. The code will also be used by TDX, but (probably) not through the ioctl - Enable halt poll shrinking by default, as Intel found it to be a clear win - Setup empty IRQ routing when creating a VM to avoid having to synchronize SRCU when creating a split IRQCHIP on x86 - Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag that arch code can use for hooking both sched_in() and sched_out() - Take the vCPU @id as an "unsigned long" instead of "u32" to avoid truncating a bogus value from userspace, e.g. to help userspace detect bugs - Mark a vCPU as preempted if and only if it's scheduled out while in the KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest memory when retrieving guest state during live migration blackout Selftests: - Remove dead code in the memslot modification stress test - Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs - Print the guest pseudo-RNG seed only when it changes, to avoid spamming the log for tests that create lots of VMs - Make the PMU counters test less flaky when counting LLC cache misses by doing CLFLUSH{OPT} in every loop iteration" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits) crypto: ccp: Add the SNP_VLEK_LOAD command KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops KVM: x86: Replace static_call_cond() with static_call() KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event x86/sev: Move sev_guest.h into common SEV header KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event KVM: x86: Suppress MMIO that is triggered during task switch emulation KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory() KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault" KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory KVM: Document KVM_PRE_FAULT_MEMORY ioctl mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE perf kvm: Add kvm-stat for loongarch64 LoongArch: KVM: Add PV steal time support in guest side ...

Merge tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2024-07-20T04:00:33Z

Pull powerpc updates from Michael Ellerman: - Remove support for 40x CPUs & platforms - Add support to the 64-bit BPF JIT for cpu v4 instructions - Fix PCI hotplug driver crash on powernv - Fix doorbell emulation for KVM on PAPR guests (nestedv2) - Fix KVM nested guest handling of some less used SPRs - Online NUMA nodes with no CPU/memory if they have a PCI device attached - Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels - Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian King, Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra, Gautam Menghani, Haren Myneni, Hari Bathini, Jeff Johnson, Krishna Kumar, Krzysztof Kozlowski, Nathan Lynch, Nicholas Piggin, Nick Bowler, Nilay Shroff, Rob Herring (Arm), Shawn Anastasio, Shivaprasad G Bhat, Sourabh Jain, Srikar Dronamraju, Timothy Pearson, Uwe Kleine-König, and Vaibhav Jain. * tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (57 commits) Documentation/powerpc: Mention 40x is removed powerpc: Remove 40x leftovers macintosh/therm_windtunnel: fix module unload. powerpc: Check only single values are passed to CPU/MMU feature checks powerpc/xmon: Fix disassembly CPU feature checks powerpc: Drop clang workaround for builtin constant checks powerpc64/bpf: jit support for signed division and modulo powerpc64/bpf: jit support for sign extended mov powerpc64/bpf: jit support for sign extended load powerpc64/bpf: jit support for unconditional byte swap powerpc64/bpf: jit support for 32bit offset jmp instruction powerpc/pci: Hotplug driver bridge support pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv powerpc/configs: Update defconfig with now user-visible CONFIG_FSL_IFC powerpc: add missing MODULE_DESCRIPTION() macros macintosh/mac_hid: add MODULE_DESCRIPTION() KVM: PPC: add missing MODULE_DESCRIPTION() macros powerpc/kexec: Use of_property_read_reg() powerpc/64s/radix/kfence: map __kfence_pool at page granularity powerpc/pseries/iommu: Define spapr_tce_table_group_ops only with CONFIG_IOMMU_API ...

Merge tag 'kvm-x86-generic-6.11' of https://github.com/kvm-x86/linux into HEAD

2024-07-16T13:51:36Z

KVM generic changes for 6.11 - Enable halt poll shrinking by default, as Intel found it to be a clear win. - Setup empty IRQ routing when creating a VM to avoid having to synchronize SRCU when creating a split IRQCHIP on x86. - Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag that arch code can use for hooking both sched_in() and sched_out(). - Take the vCPU @id as an "unsigned long" instead of "u32" to avoid truncating a bogus value from userspace, e.g. to help userspace detect bugs. - Mark a vCPU as preempted if and only if it's scheduled out while in the KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest memory when retrieving guest state during live migration blackout. - A few minor cleanups

KVM: PPC: add missing MODULE_DESCRIPTION() macros

2024-07-04T12:20:47Z

With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/kvm/test-guest-state-buffer.o WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/kvm/kvm-pr.o WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/kvm/kvm-hv.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson [mpe: Change kvm-hv description to mention POWER8 & later] Signed-off-by: Michael Ellerman Link: https://msgid.link/20240615-md-powerpc-arch-powerpc-kvm-v1-1-7478648b3100@quicinc.com

KVM: Introduce vcpu->wants_to_run

2024-06-18T16:20:01Z

Introduce vcpu->wants_to_run to indicate when a vCPU is in its core run loop, i.e. when the vCPU is running the KVM_RUN ioctl and immediate_exit was not set. Replace all references to vcpu->run->immediate_exit with !vcpu->wants_to_run to avoid TOCTOU races with userspace. For example, a malicious userspace could invoked KVM_RUN with immediate_exit=true and then after KVM reads it to set wants_to_run=false, flip it to false. This would result in the vCPU running in KVM_RUN with wants_to_run=false. This wouldn't cause any real bugs today but is a dangerous landmine. Signed-off-by: David Matlack Link: https://lore.kernel.org/r/20240503181734.1467938-2-dmatlack@google.com Signed-off-by: Sean Christopherson

KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group()

2024-06-16T00:20:11Z

Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group(). It looks up `stt` from tablefd, but then continues to use it after doing fdput() on the returned fd. After the fdput() the tablefd is free to be closed by another thread. The close calls kvm_spapr_tce_release() and then release_spapr_tce_table() (via call_rcu()) which frees `stt`. Although there are calls to rcu_read_lock() in kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent the UAF, because `stt` is used outside the locked regions. With an artifcial delay after the fdput() and a userspace program which triggers the race, KASAN detects the UAF: BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505 CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1 Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Call Trace: dump_stack_lvl+0xb4/0x108 (unreliable) print_report+0x2b4/0x6ec kasan_report+0x118/0x2b0 __asan_load4+0xb8/0xd0 kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] kvm_vfio_set_attr+0x524/0xac0 [kvm] kvm_device_ioctl+0x144/0x240 [kvm] sys_ioctl+0x62c/0x1810 system_call_exception+0x190/0x440 system_call_vectored_common+0x15c/0x2ec ... Freed by task 0: ... kfree+0xec/0x3e0 release_spapr_tce_table+0xd4/0x11c [kvm] rcu_core+0x568/0x16a0 handle_softirqs+0x23c/0x920 do_softirq_own_stack+0x6c/0x90 do_softirq_own_stack+0x58/0x90 __irq_exit_rcu+0x218/0x2d0 irq_exit+0x30/0x80 arch_local_irq_restore+0x128/0x230 arch_local_irq_enable+0x1c/0x30 cpuidle_enter_state+0x134/0x5cc cpuidle_enter+0x6c/0xb0 call_cpuidle+0x7c/0x100 do_idle+0x394/0x410 cpu_startup_entry+0x60/0x70 start_secondary+0x3fc/0x410 start_secondary_prolog+0x10/0x14 Fix it by delaying the fdput() until `stt` is no longer in use, which is effectively the entire function. To keep the patch minimal add a call to fdput() at each of the existing return paths. Future work can convert the function to goto or __cleanup style cleanup. With the fix in place the test case no longer triggers the UAF. Reported-by: Al Viro Closes: https://lore.kernel.org/all/20240610024437.GA1464458@ZenIV/ Signed-off-by: Michael Ellerman Link: https://msgid.link/20240614122910.3499489-1-mpe@ellerman.id.au

KVM: PPC: Book3S HV nestedv2: Keep nested guest HASHPKEYR in sync

2024-06-06T12:39:04Z

The nestedv2 APIs has the guest state element defined for HASHPKEYR for the save-restore with L0. However, its ignored in the code. The patch takes care of this for the HASHPKEYR GSID. Signed-off-by: Shivaprasad G Bhat Signed-off-by: Michael Ellerman Link: https://msgid.link/171759286679.1480.17383725118762651985.stgit@linux.ibm.com

KVM: PPC: Book3S HV: Add one-reg interface for HASHPKEYR register

2024-06-06T12:39:04Z

The patch adds a one-reg register identifier which can be used to read and set the virtual HASHPKEYR for the guest during enter/exit with KVM_REG_PPC_HASHPKEYR. The specific SPR KVM API documentation too updated. Signed-off-by: Shivaprasad G Bhat Signed-off-by: Michael Ellerman Link: https://msgid.link/171759285547.1480.12374595786792346073.stgit@linux.ibm.com

KVM: PPC: Book3S HV nestedv2: Keep nested guest HASHKEYR in sync

2024-06-06T12:39:04Z

The nestedv2 APIs has the guest state element defined for HASHKEYR for the save-restore with L0. However, its ignored in the code. The patch takes care of this for the HASHKEYR GSID. Signed-off-by: Shivaprasad G Bhat Reviewed-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://msgid.link/171759284380.1480.15665015792935543933.stgit@linux.ibm.com