wireguard-linux/arch/powerpc/platforms/ps3, branch stable

powerpc/ps3: Fix repository.c build failure

2026-09-07T04:38:46Z

GCC fails to build ps3_defconfig with the following errors: arch/powerpc/platforms/ps3/repository.c: In function ‘make_first_field.constprop’: arch/powerpc/platforms/ps3/repository.c:78:9: error: ‘strnlen’ specified bound 8 exceeds source size 3 [-Werror=stringop-overread] 78 | memcpy((char *)&n, text, strnlen(text, sizeof(n))); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/platforms/ps3/repository.c: In function ‘make_first_field.constprop’: arch/powerpc/platforms/ps3/repository.c:78:9: error: ‘strnlen’ specified bound 8 exceeds source size 4 [-Werror=stringop-overread] 78 | memcpy((char *)&n, text, strnlen(text, sizeof(n))); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The current use of strnlen(text, sizeof(n)) triggers -Wstringop-overread when text is a short string literal that is smaller than sizeof(n), such as "bi" or "bus". Use strlen(text) instead and clamp the copy length to sizeof(n) before memcpy(). Drop the redundant char * cast while at it. Fixes: f94a84a09148 ("powerpc/ps3: refactor strncpy usage") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260703165834.137242-2-thorsten.blum@linux.dev

Merge tag 'powerpc-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2026-08-18T19:08:13Z

Pull powerpc updates from Madhavan Srinivasan: - Enable Rust for ppc64le - ppc4xx gpio driver updates - Add power12 base enablement support - Validate arch_compat against host compatibility mode - Simplify bootx_scan_dt_build_struct() in powermac platform - Implement get_direction() in cpm2 - Use cpu_relax() in ps3_create_spu() - Add NULL guard for cause_ipi in smp_muxed_ipi_message_pass - Fixes to handle pseries watchdogs in kdump path - Fix missing r2 clobber in PCREL inline assembly - Set GPIO chip parent on ppc44x - KVM: Introduce KVM_CAP_PPC_COMPAT_CAPS and wire up ioctl - KVM: Use generic xfer to guest work function - Enable to run posix cpu timers in task context - Misc fixes and cleanups Thanks to Aditya Gupta, Alice Ryhl, Amit Machhiwal, Andrew Morton, Anushree Mathur, Athira Rajeev, Bartosz Golaszewski, Cédric Le Goater, Christian König, Christophe Leroy (CS GROUP), Gary Guo, Gaurav Batra, Gautam Menghani, Gou Hao, Hari Bathini, Harsh Prateek Bora, jiazhenyuan, Jinjie Ruan, Link Mauve, Linus Walleij, Mahesh Kumar G Mahesh Salgaonkar, Michael Walle, Michal Suchánek, Mukesh Kumar Chaurasiya (IBM), Nicholas Piggin, Nikhil Kumar Singh, Praveen K Pandey, Ritesh Harjani (IBM), Rosen Penev, Saket Kumar Bhaskar, Shrikanth Hegde, Sourabh Jain, Thorsten Blum, Vaibhav Jain, Venkat Rao Bagalkote, Vishal Chourasia, Wentao Guan, and Yanfei Xu. * tag 'powerpc-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (62 commits) powerpc/pseries/iommu: switch to Default DMA window during kdump powerpc/configs: enable CONFIG_RAS to fix EDAC support KVM: PPC: Document KVM_PPC_GET_COMPAT_CAPS ioctl KVM: PPC: Book3S HV: Add support for compat CPU capabilities for KVM on PowerNV KVM: PPC: Book3S HV: Implement compat CPU capability retrieval for KVM on PowerVM KVM: PPC: Introduce KVM_CAP_PPC_COMPAT_CAPS and wire up ioctl gpio: ppc44x: use dev_name() for chip label gpio: ppc44x: fix undefined behavior in GPIO_MASK2 macro gpio: ppc44x: drop PPC-specific IO helpers gpio: ppc44x: Convert GPIO to generic MMIO gpio: ppc44x: Use platform resource helper for GPIO MMIO gpio: ppc44x: Use module platform driver helper for GPIO gpio: ppc44x: update all 4xx to 44x gpio: move ppc4xx gpio driver from arch/powerpc to drivers/gpio KVM: PPC: Use min() in kvm_vm_ioctl_check_extension() KVM: PPC: booke: Use min() in watchdog_next_timeout() powerpc/perf: Add power12 Base Performance Monitoring support powerpc: Add Power12 architected mode powerpc: Add Power12 raw mode powerpc/pseries: Limit PVR list to 16 entries for CAS negotiation ...

powerpc/ps3: Use cpu_relax() in ps3_create_spu()

2026-07-31T11:36:03Z

Use cpu_relax() to wait for the execution status SPE_EX_STATE_EXECUTED. Drop the comments while at it. Signed-off-by: Thorsten Blum Reviewed-by: Christophe Leroy (CS GROUP) Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260720231153.116827-2-thorsten.blum@linux.dev

powerpc/ps3: Fix map failure path in dma_ioc0_map_pages()

2026-07-28T04:53:31Z

If lv1_put_iopte() fails in dma_ioc0_map_pages(), the error path decrements iopage but keeps using the failed mapping's offset. As a result, it repeatedly tries to invalidate the failed IOPTE slot and leaves the already installed IOPTEs valid. Recompute offset and invalidate the installed IOPTEs instead. Fixes: 6bb5cf102541 ("[POWERPC] PS3: System-bus rework") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Reviewed-by: Ritesh Harjani (IBM) Reviewed-by: Geert Uytterhoeven Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260711130931.740719-3-thorsten.blum@linux.dev

powerpc/ps3: Remove unused struct table in setup_areas()

2026-07-28T04:53:31Z

The local table structure is not used - remove it. Reviewed-by: Geert Uytterhoeven Signed-off-by: Thorsten Blum Reviewed-by: Christophe Leroy (CS GROUP) Reviewed-by: Ritesh Harjani (IBM) Reviewed-by: Amit Machhiwal Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260713091731.97212-3-thorsten.blum@linux.dev

powerpc: use sysfs_emit{_at} in sysfs show functions

2026-06-02T05:54:32Z

Replace sprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show functions, which are preferred for formatting sysfs output because they provide safer bounds checking. While the current code only emits strings that fit easily within PAGE_SIZE, use sysfs_emit() and sysfs_emit_at() to follow secure coding best practices. This is a mechanical cleanup with a few simple edge cases: - In domains_show(), drop the redundant n < 0 check since neither sprintf() nor sysfs_emit() return negative values. - In powercap_show() and psr_show(), also drop the dead ret < 0 checks. - In ps3_fw_version_show(), normalize the output by adding a terminating newline as suggested by checkpatch. - In vio's modalias_show(), replace the deprecated strcpy() [1] followed by strlen() with sysfs_emit(). Leave validate_show() and the variable-length hv-gpci helpers unchanged since they already have explicit bounds handling, and converting those would be more than a mechanical conversion. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy Signed-off-by: Thorsten Blum Reviewed-by: Christophe Leroy (CS GROUP) Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260524130002.793476-2-thorsten.blum@linux.dev

powerpc/ps3: Drop redundant result assignment

2026-05-06T02:19:19Z

Return value of ps3_start_probe_thread() is not used, so code can be simplified to fix W=1 clang warnings: arch/powerpc/platforms/ps3/device-init.c:953:6: error: variable 'result' set but not used [-Werror,-Wunused-but-set-variable] Signed-off-by: Krzysztof Kozlowski Reviewed-by: Geert Uytterhoeven Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260317130823.240279-3-krzysztof.kozlowski@oss.qualcomm.com

powerpc/ps3: spu.c: fix enum and Return kernel-doc warnings

2026-04-01T03:51:06Z

Fix enum and function return value kernel-doc warnings: Warning: spu.c:36 Excess enum value '%spe_type_logical' description in 'spe_type' Warning: spu.c:78 Excess enum value '%spe_ex_state_unexecutable' description in 'spe_ex_state' Warning: spu.c:78 Excess enum value '%spe_ex_state_executable' description in 'spe_ex_state' Warning: spu.c:78 Excess enum value '%spe_ex_state_executed' description in 'spe_ex_state' Warning: spu.c:190 No description found for return value of 'setup_areas' Fixes: de91a5342995 ("[POWERPC] ps3: add spu support") Fixes: b47027795a22 ("powerpc/ps3: Fix ioremap of spu shadow regs") Signed-off-by: Randy Dunlap Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260225055328.249204-1-rdunlap@infradead.org

Convert 'alloc_flex' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51Z

This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51Z

This was done entirely with mindless brute force, using git grep -l '\