wireguard-linux/arch/powerpc/platforms/pseries, branch jd/unified-crypt-queue

Merge tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-04-09T18:01:42Z

Pull more powerpc updates from Michael Ellerman: "The bulk of this is the series to make CONFIG_COMPAT user-selectable, it's been around for a long time but was blocked behind the syscall-in-C series. Plus there's also a few fixes and other minor things. Summary: - A fix for a crash in machine check handling on pseries (ie. guests) - A small series to make it possible to disable CONFIG_COMPAT, and turn it off by default for ppc64le where it's not used. - A few other miscellaneous fixes and small improvements. Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong" * tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Always build the tm-poison test 64-bit powerpc: Improve ppc_save_regs() Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled" powerpc/time: Replace by powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory powerpc/perf: split callchain.c by bitness powerpc/64: Make COMPAT user-selectable disabled on littleendian by default. powerpc/64: make buildable without CONFIG_COMPAT powerpc/perf: consolidate valid_user_sp -> invalid_user_sp powerpc/perf: consolidate read_user_stack_32 powerpc: move common register copy functions from signal_32.c to signal.c powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig powerpc/ps3: Remove an unneeded NULL check powerpc/ps3: Remove duplicate error message powerpc/powernv: Re-enable imc trace-mode in kernel powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events. powerpc/pseries: Fix MCE handling on pseries selftests/eeh: Skip ahci adapters powerpc/64s: Fix doorbell wakeup msgclr optimisation

Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2020-04-09T04:03:40Z

Pull libnvdimm and dax updates from Dan Williams: "There were multiple touches outside of drivers/nvdimm/ this round to add cross arch compatibility to the devm_memremap_pages() interface, enhance numa information for persistent memory ranges, and add a zero_page_range() dax operation. This cycle I switched from the patchwork api to Konstantin's b4 script for collecting tags (from x86, PowerPC, filesystem, and device-mapper folks), and everything looks to have gone ok there. This has all appeared in -next with no reported issues. Summary: - Add support for region alignment configuration and enforcement to fix compatibility across architectures and PowerPC page size configurations. - Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Pick up some miscellaneous minor fixes, that missed v5.6-final, including a some smatch reports in the ioctl path and some unit test compilation fixups. - Fixup some flexible-array declarations" * tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits) dax: Move mandatory ->zero_page_range() check in alloc_dax() dax,iomap: Add helper dax_iomap_zero() to zero a range dax: Use new dax zero page method for zeroing a page dm,dax: Add dax zero_page_range operation s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver dax, pmem: Add a dax operation zero_page_range pmem: Add functions for reading/writing page to/from pmem libnvdimm: Update persistence domain value for of_pmem and papr_scm device tools/test/nvdimm: Fix out of tree build libnvdimm/region: Fix build error libnvdimm/region: Replace zero-length array with flexible-array member libnvdimm/label: Replace zero-length array with flexible-array member ACPI: NFIT: Replace zero-length array with flexible-array member libnvdimm/region: Introduce an 'align' attribute libnvdimm/region: Introduce NDD_LABELING libnvdimm/namespace: Enforce memremap_compat_align() libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid libnvdimm: Out of bounds read in __nd_ioctl() acpi/nfit: improve bounds checking for 'func' mm/memremap_pages: Introduce memremap_compat_align() ...

Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-04-05T18:12:59Z

Pull powerpc updates from Michael Ellerman: "Slightly late as I had to rebase mid-week to insert a bug fix: - A large series from Nick for 64-bit to further rework our exception vectors, and rewrite portions of the syscall entry/exit and interrupt return in C. The result is much easier to follow code that is also faster in general. - Cleanup of our ptrace code to split various parts out that had become badly intertwined with #ifdefs over the years. - Changes to our NUMA setup under the PowerVM hypervisor which should hopefully avoid non-sensical topologies which can lead to warnings from the workqueue code and other problems. - MAINTAINERS updates to remove some of our old orphan entries and update the status of others. - Quite a few other small changes and fixes all over the map. Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc: Make setjmp/longjmp signature standard powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type powerpc: Suppress .eh_frame generation powerpc: Drop -fno-dwarf2-cfi-asm powerpc/32: drop unused ISA_DMA_THRESHOLD powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces selftests/powerpc: Fix try-run when source tree is not writable powerpc/vmlinux.lds: Explicitly retain .gnu.hash powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c powerpc/ptrace: create ppc_gethwdinfo() powerpc/ptrace: create ptrace_get_debugreg() powerpc/ptrace: split out ADV_DEBUG_REGS related functions. powerpc/ptrace: move register viewing functions out of ptrace.c powerpc/ptrace: split out TRANSACTIONAL_MEM related functions. powerpc/ptrace: split out SPE related functions. powerpc/ptrace: split out ALTIVEC related functions. powerpc/ptrace: split out VSX related functions. powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64 powerpc/ptrace: remove unused header includes ...

Merge branch 'for-5.7/libnvdimm' into libnvdimm-for-next

2020-04-03T02:55:17Z

- Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Fixup some flexible-array declarations.

Merge branch 'for-5.7/numa' into libnvdimm-for-next

2020-04-03T02:50:31Z

- Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined.

powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory

2020-04-03T01:22:47Z

Unlike normal memory ("memory" compatible type in the FDT), the persistent memory ("ibm,pmemory" in the FDT) can be mapped anywhere in the guest physical space and it can be used for DMA. In order to maintain 1:1 mapping via the huge DMA window, we need to know the maximum physical address at the time of the window setup. So far we've been looking at "memory" nodes but "ibm,pmemory" does not have fixed addresses and the persistent memory may be mapped afterwards. Since the persistent memory is still backed with page structs, use MAX_PHYSMEM_BITS as the upper limit. This effectively disables huge DMA window in LPAR under pHyp if persistent memory is present but this is the best we can do for the moment. Signed-off-by: Alexey Kardashevskiy Tested-by: Wen Xiong Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200331012338.23773-1-aik@ozlabs.ru

mm/sparse: rename pfn_present() to pfn_in_present_section()

2020-04-02T16:35:30Z

After introducing mem sub section concept, pfn_present() loses its literal meaning, and will not be necessary a truth on partial populated mem section. Since all of the callers use it to judge an absent section, it is better to rename pfn_present() as pfn_in_present_section(). Signed-off-by: Pingfan Liu Signed-off-by: Andrew Morton Reviewed-by: David Hildenbrand Acked-by: Michael Ellerman [powerpc] Cc: Dan Williams Cc: Michal Hocko Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Cc: Leonardo Bras Cc: Nathan Fontenot Cc: Nathan Lynch Link: http://lkml.kernel.org/r/1581919110-29575-1-git-send-email-kernelfans@gmail.com Signed-off-by: Linus Torvalds

powerpc/pseries: Fix MCE handling on pseries

2020-04-02T13:09:58Z

MCE handling on pSeries platform fails as recent rework to use common code for pSeries and PowerNV in machine check error handling tries to access per-cpu variables in realmode. The per-cpu variables may be outside the RMO region on pSeries platform and needs translation to be enabled for access. Just moving these per-cpu variable into RMO region did'nt help because we queue some work to workqueues in real mode, which again tries to touch per-cpu variables. Also fwnmi_release_errinfo() cannot be called when translation is not enabled. This patch fixes this by enabling translation in the exception handler when all required real mode handling is done. This change only affects the pSeries platform. Without this fix below kernel crash is seen on injecting SLB multihit: BUG: Unable to handle kernel data access on read at 0xc00000027b205950 Faulting instruction address: 0xc00000000003b7e0 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: mcetest_slb(OE+) af_packet(E) xt_tcpudp(E) ip6t_rpfilter(E) ip6t_REJECT(E) ipt_REJECT(E) xt_conntrack(E) ip_set(E) nfnetlink(E) ebtable_nat(E) ebtable_broute(E) ip6table_nat(E) ip6table_mangle(E) ip6table_raw(E) ip6table_security(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) iptable_mangle(E) iptable_raw(E) iptable_security(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) xfs(E) ibmveth(E) vmx_crypto(E) gf128mul(E) uio_pdrv_genirq(E) uio(E) crct10dif_vpmsum(E) rtc_generic(E) btrfs(E) libcrc32c(E) xor(E) zstd_decompress(E) zstd_compress(E) raid6_pq(E) sr_mod(E) sd_mod(E) cdrom(E) ibmvscsi(E) scsi_transport_srp(E) crc32c_vpmsum(E) dm_mod(E) sg(E) scsi_mod(E) CPU: 34 PID: 8154 Comm: insmod Kdump: loaded Tainted: G OE 5.5.0-mahesh #1 NIP: c00000000003b7e0 LR: c0000000000f2218 CTR: 0000000000000000 REGS: c000000007dcb960 TRAP: 0300 Tainted: G OE (5.5.0-mahesh) MSR: 8000000000001003 CR: 28002428 XER: 20040000 CFAR: c0000000000f2214 DAR: c00000027b205950 DSISR: 40000000 IRQMASK: 0 GPR00: c0000000000f2218 c000000007dcbbf0 c000000001544800 c000000007dcbd70 GPR04: 0000000000000001 c000000007dcbc98 c008000000d00258 c0080000011c0000 GPR08: 0000000000000000 0000000300000003 c000000001035950 0000000003000048 GPR12: 000000027a1d0000 c000000007f9c000 0000000000000558 0000000000000000 GPR16: 0000000000000540 c008000001110000 c008000001110540 0000000000000000 GPR20: c00000000022af10 c00000025480fd70 c008000001280000 c00000004bfbb300 GPR24: c000000001442330 c00800000800000d c008000008000000 4009287a77000510 GPR28: 0000000000000000 0000000000000002 c000000001033d30 0000000000000001 NIP [c00000000003b7e0] save_mce_event+0x30/0x240 LR [c0000000000f2218] pseries_machine_check_realmode+0x2c8/0x4f0 Call Trace: Instruction dump: 3c4c0151 38429050 7c0802a6 60000000 fbc1fff0 fbe1fff8 f821ffd1 3d42ffaf 3fc2ffaf e98d0030 394a1150 3bdef530 <7d6a62aa> 1d2b0048 2f8b0063 380b0001 ---[ end trace 46fd63f36bbdd940 ]--- Fixes: 9ca766f9891d ("powerpc/64s/pseries: machine check convert to use common event code") Reviewed-by: Mahesh Salgaonkar Reviewed-by: Nicholas Piggin Signed-off-by: Ganesh Goudar Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200320110119.10207-1-ganeshgr@linux.ibm.com

libnvdimm: Update persistence domain value for of_pmem and papr_scm device

2020-03-31T21:42:28Z

Currently, kernel shows the below values "persistence_domain":"cpu_cache" "persistence_domain":"memory_controller" "persistence_domain":"unknown" "cpu_cache" indicates no extra instructions is needed to ensure the persistence of data in the pmem media on power failure. "memory_controller" indicates cpu cache flush instructions are required to flush the data. Platform provides mechanisms to automatically flush outstanding write data from memory controler to pmem on system power loss. Based on the above use memory_controller for non volatile regions on ppc64. Signed-off-by: Aneesh Kumar K.V Link: https://lore.kernel.org/r/20200324034821.60869-1-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams

powerpc/pseries: Handle UE event for memcpy_mcsafe

2020-03-27T03:59:35Z

memcpy_mcsafe has been implemented for power machines which is used by pmem infrastructure, so that an UE encountered during memcpy from pmem devices would not result in panic instead a right error code is returned. The implementation expects machine check handler to ignore the event and set nip to continue the execution from fixup code. Appropriate changes are already made to powernv machine check handler, make similar changes to pseries machine check handler to ignore the the event and set nip to continue execution at the fixup entry if we hit UE at an instruction with a fixup entry. while we are at it, have a common function which searches the exception table entry and updates nip with fixup address, and any future common changes can be made in this function that are valid for both architectures. powernv changes are made by commit 895e3dceeb97 ("powerpc/mce: Handle UE event for memcpy_mcsafe") Reviewed-by: Mahesh Salgaonkar Reviewed-by: Santosh S Signed-off-by: Ganesh Goudar Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200326184916.31172-1-ganeshgr@linux.ibm.com