wireguard-linux/arch/riscv, branch jd/unified-crypt-queue

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-04-16T21:52:29Z

Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ...

mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS

2020-04-10T22:36:21Z

There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the existing VM_STACK_DEFAULT_FLAGS. While here, also define some more macros with standard VMA access flag combinations that are used frequently across many platforms. Apart from simplification, this reduces code duplication as well. Signed-off-by: Anshuman Khandual Signed-off-by: Andrew Morton Reviewed-by: Vlastimil Babka Acked-by: Geert Uytterhoeven Cc: Richard Henderson Cc: Vineet Gupta Cc: Russell King Cc: Catalin Marinas Cc: Mark Salter Cc: Guo Ren Cc: Yoshinori Sato Cc: Brian Cain Cc: Tony Luck Cc: Michal Simek Cc: Ralf Baechle Cc: Paul Burton Cc: Nick Hu Cc: Ley Foon Tan Cc: Jonas Bonn Cc: "James E.J. Bottomley" Cc: Michael Ellerman Cc: Paul Walmsley Cc: Heiko Carstens Cc: Rich Felker Cc: "David S. Miller" Cc: Guan Xuetao Cc: Thomas Gleixner Cc: Jeff Dike Cc: Chris Zankel Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2020-04-10T00:39:22Z

Daniel Borkmann says: ==================== pull-request: bpf 2020-04-10 The following pull-request contains BPF updates for your *net* tree. We've added 13 non-merge commits during the last 7 day(s) which contain a total of 13 files changed, 137 insertions(+), 43 deletions(-). The main changes are: 1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang. 2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov. 3) Fix oob write in AF_XDP when meta data is used, from Li RongQing. 4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified, from Andrey Ignatov. 5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport field uninitialized, from Joe Stringer. 6) Fix mprotect() test case for the BPF LSM, from KP Singh. ==================== Signed-off-by: David S. Miller

Merge tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2020-04-09T17:51:30Z

Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of new features: - Partial support for the Kendryte K210. There are still a few outstanding issues that I have patches for, but I don't actually have a board to test them so they're not included yet. - SBI v0.2 support. - Fixes to support for building with LLVM-based toolchains. The resulting images are known not to boot yet. I don't anticipate a part two, but I'll probably have something early in the RCs to finish up the K210 support" * tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits) riscv: create a loader.bin boot image for Kendryte SoC riscv: Kendryte K210 default config riscv: Add Kendryte K210 device tree riscv: Select required drivers for Kendryte SOC riscv: Add Kendryte K210 SoC support riscv: Add SOC early init support riscv: Unaligned load/store handling for M_MODE RISC-V: Support cpu hotplug RISC-V: Add supported for ordered booting method using HSM RISC-V: Add SBI HSM extension definitions RISC-V: Export SBI error to linux error mapping function RISC-V: Add cpu_ops and modify default booting method RISC-V: Move relocate and few other functions out of __init RISC-V: Implement new SBI v0.2 extensions RISC-V: Introduce a new config for SBI v0.1 RISC-V: Add SBI v0.2 extension definitions RISC-V: Add basic support for SBI v0.2 RISC-V: Mark existing SBI as 0.1 SBI. riscv: Use macro definition instead of magic number riscv: Add support to dump the kernel page tables ...

riscv, bpf: Fix offset range checking for auipc+jalr on RV64

2020-04-07T22:53:41Z

The existing code in emit_call on RV64 checks that the PC-relative offset to the function fits in 32 bits before calling emit_jump_and_link to emit an auipc+jalr pair. However, this check is incorrect because offsets in the range [2^31 - 2^11, 2^31 - 1] cannot be encoded using auipc+jalr on RV64 (see discussion [1]). The RISC-V spec has recently been updated to reflect this fact [2, 3]. This patch fixes the problem by moving the check on the offset into emit_jump_and_link and modifying it to the correct range of encodable offsets, which is [-2^31 - 2^11, 2^31 - 2^11). This also enforces the check on the offset to other uses of emit_jump_and_link (e.g., BPF_JA) as well. Currently, this bug is unlikely to be triggered, because the memory region from which JITed images are allocated is close enough to kernel text for the offsets to not become too large; and because the bounds on BPF program size are small enough. This patch prevents this problem from becoming an issue if either of these change. [1]: https://groups.google.com/a/groups.riscv.org/forum/#!topic/isa-dev/bwWFhBnnZFQ [2]: https://github.com/riscv/riscv-isa-manual/commit/b1e42e09ac55116dbf9de5e4fb326a5a90e4a993 [3]: https://github.com/riscv/riscv-isa-manual/commit/4c1b2066ebd2965a422e41eb262d0a208a7fea07 Signed-off-by: Luke Nelson Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20200406221604.18547-1-luke.r.nels@gmail.com

Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2020-04-03T20:12:26Z

Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments

riscv: create a loader.bin boot image for Kendryte SoC

2020-04-03T17:50:17Z

Create the loader.bin bootable image file that can be loaded into Kendryte K210 based boards using the kflash.py tool with the command: kflash.py/kflash.py -t arch/riscv/boot/loader.bin Signed-off-by: Christoph Hellwig Signed-off-by: Damien Le Moal Reviewed-by: Anup Patel Reviewed-by: Palmer Dabbelt Signed-off-by: Palmer Dabbelt

riscv: Kendryte K210 default config

2020-04-03T17:50:16Z

This patch adds a defconfig file to build No-MMU kernels meant for boards based on the Kendryte K210 SoC. Signed-off-by: Damien Le Moal Signed-off-by: Palmer Dabbelt

riscv: Add Kendryte K210 device tree

2020-04-03T17:50:15Z

Add a generic device tree for Kendryte K210 SoC based boards. This is for now a very simple device tree describing the core elements of the SoC. This is suitable (and tested) for the Kendryte KD233 development board, the Sipeed MAIX M1 Dan Dock board and the Sipeed MAIXDUINO board. Signed-off-by: Damien Le Moal Reviewed-by: Sean Anderson Signed-off-by: Palmer Dabbelt

riscv: Select required drivers for Kendryte SOC

2020-04-03T17:50:14Z

This patch selects drivers required for the Kendryte K210 SOC. Since K210 SoC based boards do not provide a device tree, this patch also enables the BUILTIN_DTB option. Signed-off-by: Damien Le Moal Reviewed-by: Anup Patel Reviewed-by: Palmer Dabbelt Signed-off-by: Palmer Dabbelt