wireguard-linux/arch/s390/include/uapi/asm/zcrypt.h, branch jd/unified-crypt-queue

s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb

2020-01-30T12:07:55Z

Minor rework for struct ep11_cprb and struct ep11_urb. Use of u8, u16, u32 instead of unsigned char. Declare pointers to mem from userspace with __user to give sparse a chance to check. Export zcrypt_send_ep11_cprb() function as this function will be called by code in progress which will build ep11 cprbs within the zcrypt device driver zoo and send them to EP11 crypto cards. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

s390/zcrypt: enable card/domain autoselect on ep11 cprbs

2020-01-30T12:07:55Z

For EP11 CPRBs there was only to choose between specify one or more ep11 targets or not give a target at all. Without any target the zcrypt code assumed AUTOSELECT. For EP11 this ended up in choosing any EP11 APQN with regards to the weight. However, CCA CPRBs can have a more fine granular target addressing. The caller can give 0xFFFF as AUTOSELECT for the card and/or the domain. So it's possible to address any card but domain given or any domain but card given. This patch now introduces the very same for EP11 CPRB handling. An EP11 target entry now may contain 0xFFFF as card and/or domain value with the meaning of ANY card or domain. So now the same behavior as with CCA CPRBs becomes possible: Address any card with given domain or address any domain within given card. For convenience the zcrypt.h header file now has two new defines AUTOSEL_AP and AUTOSEL_DOM covering the 0xFFFF value to address card any and domain any. Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

s390/zcrypt: CEX7S exploitation support

2019-09-19T10:56:06Z

This patch adds CEX7 exploitation support for the AP bus code, the zcrypt device driver zoo and the vfio device driver. Signed-off-by: Harald Freudenberger Reviewed-by: Ingo Franzki Signed-off-by: Vasily Gorbik

s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header

2019-07-23T08:45:42Z

When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to make sure they can be included from user-space. Currently, zcrypt.h is excluded from the test coverage. To make it join the compile-test, we need to fix the build errors attached below. For a case like this, we decided to use __u{8,16,32,64} variable types in this discussion: https://lkml.org/lkml/2019/6/5/18 Build log: CC usr/include/asm/zcrypt.h.s In file included from :32:0: ./usr/include/asm/zcrypt.h:163:2: error: unknown type name ‘uint16_t’ uint16_t cprb_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:168:2: error: unknown type name ‘uint32_t’ uint32_t source_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:169:2: error: unknown type name ‘uint32_t’ uint32_t target_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:170:2: error: unknown type name ‘uint32_t’ uint32_t ret_code; ^~~~~~~~ ./usr/include/asm/zcrypt.h:171:2: error: unknown type name ‘uint32_t’ uint32_t reserved1; ^~~~~~~~ ./usr/include/asm/zcrypt.h:172:2: error: unknown type name ‘uint32_t’ uint32_t reserved2; ^~~~~~~~ ./usr/include/asm/zcrypt.h:173:2: error: unknown type name ‘uint32_t’ uint32_t payload_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:182:2: error: unknown type name ‘uint16_t’ uint16_t ap_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:183:2: error: unknown type name ‘uint16_t’ uint16_t dom_id; ^~~~~~~~ ./usr/include/asm/zcrypt.h:198:2: error: unknown type name ‘uint16_t’ uint16_t targets_num; ^~~~~~~~ ./usr/include/asm/zcrypt.h:199:2: error: unknown type name ‘uint64_t’ uint64_t targets; ^~~~~~~~ ./usr/include/asm/zcrypt.h:200:2: error: unknown type name ‘uint64_t’ uint64_t weight; ^~~~~~~~ ./usr/include/asm/zcrypt.h:201:2: error: unknown type name ‘uint64_t’ uint64_t req_no; ^~~~~~~~ ./usr/include/asm/zcrypt.h:202:2: error: unknown type name ‘uint64_t’ uint64_t req_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:203:2: error: unknown type name ‘uint64_t’ uint64_t req; ^~~~~~~~ ./usr/include/asm/zcrypt.h:204:2: error: unknown type name ‘uint64_t’ uint64_t resp_len; ^~~~~~~~ ./usr/include/asm/zcrypt.h:205:2: error: unknown type name ‘uint64_t’ uint64_t resp; ^~~~~~~~ Signed-off-by: Masahiro Yamada Signed-off-by: Heiko Carstens

s390/zcrypt: improve special ap message cmd handling

2018-11-30T06:22:05Z

There exist very few ap messages which need to have the 'special' flag enabled. This flag tells the firmware layer to do some pre- and maybe postprocessing. However, it may happen that this special flag is enabled but the firmware is unable to deal with this kind of message and thus returns with reply code 0x41. For example older firmware may not know the newest messages triggered by the zcrypt device driver and thus react with reject and the named reply code. Unfortunately this reply code is not known to the zcrypt error routines and thus default behavior is to switch the ap queue offline. This patch now makes the ap error routine aware of the reply code and so userspace is informed about the bad processing result but the queue is not switched to offline state any more. Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky

s390/zcrypt: zcrypt device driver cleanup

2018-10-09T09:21:35Z

Some cleanup in the s390 zcrypt device driver: - Removed fragments of pcixx crypto card code. This code can't be reached anymore because the hardware detection function does not recognize crypto cards < CEX2 since commit f56545430736 ("s390/zcrypt: Introduce QACT support for AP bus devices.") - Rename of some files and driver names which where still reflecting pcixx support to cex2a/cex2c. - Removed all the zcrypt version strings in the file headers. There is only one place left - the zcrypt.h header file is now the only place for zcrypt device driver version info. - Zcrypt version pump up from 2.2.0 to 2.2.1. Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky

s390/zcrypt: multiple zcrypt device nodes support

2018-10-08T07:09:58Z

This patch is an extension to the zcrypt device driver to provide, support and maintain multiple zcrypt device nodes. The individual zcrypt device nodes can be restricted in terms of crypto cards, domains and available ioctls. Such a device node can be used as a base for container solutions like docker to control and restrict the access to crypto resources. The handling is done with a new sysfs subdir /sys/class/zcrypt. Echoing a name (or an empty sting) into the attribute "create" creates a new zcrypt device node. In /sys/class/zcrypt a new link will appear which points to the sysfs device tree of this new device. The attribute files "ioctlmask", "apmask" and "aqmask" in this directory are used to customize this new zcrypt device node instance. Finally the zcrypt device node can be destroyed by echoing the name into /sys/class/zcrypt/destroy. The internal structs holding the device info are reference counted - so a destroy will not hard remove a device but only marks it as removable when the reference counter drops to zero. The mask values are bitmaps in big endian order starting with bit 0. So adapter number 0 is the leftmost bit, mask is 0x8000... The sysfs attributes accept 2 different formats: * Absolute hex string starting with 0x like "0x12345678" does set the mask starting from left to right. If the given string is shorter than the mask it is padded with 0s on the right. If the string is longer than the mask an error comes back (EINVAL). * Relative format - a concatenation (done with ',') of the terms +[-] or -[-]. may be any valid number (hex, decimal or octal) in the range 0...255. Here are some examples: "+0-15,+32,-128,-0xFF" "-0-255,+1-16,+0x128" "+1,+2,+3,+4,-5,-7-10" A simple usage examples: # create new zcrypt device 'my_zcrypt': echo "my_zcrypt" >/sys/class/zcrypt/create # go into the device dir of this new device echo "my_zcrypt" >create cd my_zcrypt/ ls -l total 0 -rw-r--r-- 1 root root 4096 Jul 20 15:23 apmask -rw-r--r-- 1 root root 4096 Jul 20 15:23 aqmask -r--r--r-- 1 root root 4096 Jul 20 15:23 dev -rw-r--r-- 1 root root 4096 Jul 20 15:23 ioctlmask lrwxrwxrwx 1 root root 0 Jul 20 15:23 subsystem -> ../../../../class/zcrypt ... # customize this zcrypt node clone # enable only adapter 0 and 2 echo "0xa0" >apmask # enable only domain 6 echo "+6" >aqmask # enable all 256 ioctls echo "+0-255" >ioctls # now the /dev/my_zcrypt may be used # finally destroy it echo "my_zcrypt" >/sys/class/zcrypt/destroy Please note that a very similar 'filtering behavior' also applies to the parent z90crypt device. The two mask attributes apmask and aqmask in /sys/bus/ap act the very same for the z90crypt device node. However the implementation here is totally different as the ap bus acts on bind/unbind of queue devices and associated drivers but the effect is still the same. So there are two filters active for each additional zcrypt device node: The adapter/domain needs to be enabled on the ap bus level and it needs to be active on the zcrypt device node level. Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky

s390/zcrypt: code beautify

2018-08-20T14:02:11Z

Code beautify by following most of the checkpatch suggestions: - SPDX license identifier line complains by checkpatch - missing space or newline complains by checkpatch - octal numbers for permssions complains by checkpatch - renaming of static sysfs functions complains by checkpatch - fix of block comment complains by checkpatch - fix printf like calls where function name instead of %s __func__ was used - __packed instead of __attribute__((packed)) - init to zero for static variables removed - use of DEVICE_ATTR_RO and DEVICE_ATTR_RW macros No functional code changes or API changes! Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky

s390/zcrypt: Support up to 256 crypto adapters.

2018-04-11T08:36:27Z

There was an artificial restriction on the card/adapter id to only 6 bits but all the AP commands do support adapter ids with 8 bit. This patch removes this restriction to 64 adapters and now up to 256 adapter can get addressed. Some of the ioctl calls work on the max number of cards possible (which was 64). These ioctls are now deprecated but still supported. All the defines, structs and ioctl interface declarations have been kept for compabibility. There are now new ioctls (and defines for these) with an additional '2' appended which provide the extended versions with 256 cards supported. Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky

s390/zcrypt: Remove deprecated ioctls.

2018-04-10T05:39:01Z

This patch removes the old status calls which have been marked as deprecated since at least 2 years now. There is no known application or library relying on these ioctls any more. Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky