wireguard-linux/arch/s390/kernel/dis.c, branch jd/unified-crypt-queue

s390/disassembler: don't hide instruction addresses

2019-11-12T10:24:10Z

Due to kptr_restrict, JITted BPF code is now displayed like this: 000000000b6ed1b2: ebdff0800024 stmg %r13,%r15,128(%r15) 000000004cde2ba0: 41d0f040 la %r13,64(%r15) 00000000fbad41b0: a7fbffa0 aghi %r15,-96 Leaking kernel addresses to dmesg is not a concern in this case, because this happens only when JIT debugging is explicitly activated, which only root can do. Use %px in this particular instance, and also to print an instruction address in show_code and PCREL (e.g. brasl) arguments in print_insn. While at present functionally equivalent to %016lx, %px is recommended by Documentation/core-api/printk-formats.rst for such cases. Signed-off-by: Ilya Leoshkevich Reviewed-by: Vasily Gorbik Signed-off-by: Vasily Gorbik

s390/disassembler: update opcode table

2019-06-04T13:03:58Z

Sync with binutils and add a couple of missing instructions. Signed-off-by: Martin Schwidefsky Signed-off-by: Heiko Carstens

s390: kernel: add SPDX identifiers to the remaining files

2017-11-24T14:37:12Z

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the arch/s390/kernel/ files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Signed-off-by: Martin Schwidefsky

s390/disassembler: correct disassembly lines alignment

2017-11-24T10:02:41Z

176.718956 Krnl Code: 00000000004d38b0: a54c0018 llihh %r4,24 176.718956 00000000004d38b4: b9080014 agr %r1,%r4 ^ Using a tab to align disassembly lines which follow the first line with "Krnl Code: " doesn't always work, e.g. if there is a prefix (timestamp or syslog prefix) which is not 8 chars aligned. Go back to alignment with spaces. Fixes: b192571d1ae3 ("s390/disassembler: increase show_code buffer size") Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390/disassembler: remove confusing code

2017-11-20T07:51:02Z

When searching the opcode offset table within find_insn() the check "entry->opcode == 0" was intended to clarify that 1-byte opcodes, the first one being 0, are special. However there is no mnemonic for an illegal opcode starting with 0. Therefore there is also no opcode offset table entry that matches, which again means that the check never is true. Therefore just remove the confusing check, and add a comment which hopefully explains how this works. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/disassembler: increase show_code buffer size

2017-11-16T12:12:44Z

Current buffer size of 64 is too small. objdump shows that there are instructions which would require up to 75 bytes buffer (with current formating). 128 bytes "ought to be enough for anybody". Also replaces 8 spaces with a single tab to reduce the memory footprint. Fixes the following KASAN finding: BUG: KASAN: stack-out-of-bounds in number+0x3fe/0x538 Write of size 1 at addr 000000005a4a75a0 by task bash/1282 CPU: 1 PID: 1282 Comm: bash Not tainted 4.14.0+ #215 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) Call Trace: ([<000000000011eeb6>] show_stack+0x56/0x88) [<0000000000e1ce1a>] dump_stack+0x15a/0x1b0 [<00000000004e2994>] print_address_description+0xf4/0x288 [<00000000004e2cf2>] kasan_report+0x13a/0x230 [<0000000000e38ae6>] number+0x3fe/0x538 [<0000000000e3dfe4>] vsnprintf+0x194/0x948 [<0000000000e3ea42>] sprintf+0xa2/0xb8 [<00000000001198dc>] print_insn+0x374/0x500 [<0000000000119346>] show_code+0x4ee/0x538 [<000000000011f234>] show_registers+0x34c/0x388 [<000000000011f2ae>] show_regs+0x3e/0xa8 [<000000000011f502>] die+0x1ea/0x2e8 [<0000000000138f0e>] do_no_context+0x106/0x168 [<0000000000139a1a>] do_protection_exception+0x4da/0x7d0 [<0000000000e55914>] pgm_check_handler+0x16c/0x1c0 [<000000000090639e>] sysrq_handle_crash+0x46/0x58 ([<0000000000000007>] 0x7) [<00000000009073fa>] __handle_sysrq+0x102/0x218 [<0000000000907c06>] write_sysrq_trigger+0xd6/0x100 [<000000000061d67a>] proc_reg_write+0xb2/0x128 [<0000000000520be6>] __vfs_write+0xee/0x368 [<0000000000521222>] vfs_write+0x21a/0x278 [<000000000052156a>] SyS_write+0xda/0x178 [<0000000000e555cc>] system_call+0xc4/0x270 The buggy address belongs to the page: page:000003d1016929c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() raw: 0000000000000000 0000000000000000 0000000000000000 ffffffff00000000 raw: 0000000000000100 0000000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 000000005a4a7480: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 000000005a4a7500: 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 00 >000000005a4a7580: 00 00 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 ^ 000000005a4a7600: 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 f8 f8 000000005a4a7680: f2 f2 f2 f2 f2 f2 f8 f8 f2 f2 f3 f3 f3 f3 00 00 ================================================================== Cc: Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390/disassembler: generate opcode tables from text file

2017-11-08T21:11:02Z

The current way of adding new instructions to the opcode tables is painful and error prone. Therefore add, similar to binutils, a text file which contains all opcodes and the corresponding mnemonics and instruction formats. A small gen_opcode_table tool then generates a header file with the required enums and opcode table initializers at the prepare step of the kernel build. This way only a simple text file has to be maintained, which can be rather easily extended. Unlike before where there were plenty of opcode tables and a large switch statement to find the correct opcode table, there is now only one opcode table left which contains all instructions. A second opcode offset table now contains offsets within the opcode table to find instructions which have the same opcode prefix. In order to save space all 1-byte opcode instructions are grouped together at the end of the opcode table. This is also quite similar to like it was before. In addition also move and change code and definitions within the disassembler. As a side effect this reduces the size required for the code and opcode tables by ~1.5k. Signed-off-by: Heiko Carstens

s390/disassembler: remove insn_to_mnemonic()

2017-11-08T21:10:49Z

insn_to_mnemonic() was introduced ages ago for KVM debugging, but is unused in the meantime. Therefore remove it. Acked-by: Christian Borntraeger Signed-off-by: Heiko Carstens

s390/disassembler: add new z14 instructions

2017-09-29T13:52:24Z

Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/disassembler: add missing z13 instructions

2017-09-29T13:52:18Z

Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky