wireguard-linux/arch/x86/include/asm/percpu.h, branch jd/unified-crypt-queue

x86/percpu: Optimize raw_cpu_xchg()

2019-06-17T10:43:44Z

Since raw_cpu_xchg() doesn't need to be IRQ-safe, like this_cpu_xchg(), we can use a simple load-store instead of the cmpxchg loop. Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar

x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()

2019-06-17T10:43:40Z

Nadav Amit reported that commit: b59167ac7baf ("x86/percpu: Fix this_cpu_read()") added a bunch of constraints to all sorts of code; and while some of that was correct and desired, some of that seems superfluous. The thing is, the this_cpu_*() operations are defined IRQ-safe, this means the values are subject to change from IRQs, and thus must be reloaded. Also, the generic form: local_irq_save() __this_cpu_read() local_irq_restore() would not allow the re-use of previous values; if by nothing else, then the barrier()s implied by local_irq_*(). Which raises the point that percpu_from_op() and the others also need that volatile. OTOH __this_cpu_*() operations are not IRQ-safe and assume external preempt/IRQ disabling and could thus be allowed more room for optimization. This makes the this_cpu_*() vs __this_cpu_*() behaviour more consistent with other architectures. $ ./compare.sh defconfig-build defconfig-build1 vmlinux.o x86_pmu_cancel_txn 80 71 -9,+0 __text_poke 919 964 +45,+0 do_user_addr_fault 1082 1058 -24,+0 __do_page_fault 1194 1178 -16,+0 do_exit 2995 3027 -43,+75 process_one_work 1008 989 -67,+48 finish_task_switch 524 505 -19,+0 __schedule_bug 103 98 -59,+54 __schedule_bug 103 98 -59,+54 __sched_setscheduler 2015 2030 +15,+0 freeze_processes 203 230 +31,-4 rcu_gp_kthread_wake 106 99 -7,+0 rcu_core 1841 1834 -7,+0 call_timer_fn 298 286 -12,+0 can_stop_idle_tick 146 139 -31,+24 perf_pending_event 253 239 -14,+0 shmem_alloc_page 209 213 +4,+0 __alloc_pages_slowpath 3284 3269 -15,+0 umount_tree 671 694 +23,+0 advance_transaction 803 798 -5,+0 con_put_char 71 51 -20,+0 xhci_urb_enqueue 1302 1295 -7,+0 xhci_urb_enqueue 1302 1295 -7,+0 tcp_sacktag_write_queue 2130 2075 -55,+0 tcp_try_undo_loss 229 208 -21,+0 tcp_v4_inbound_md5_hash 438 411 -31,+4 tcp_v4_inbound_md5_hash 438 411 -31,+4 tcp_v6_inbound_md5_hash 469 411 -33,-25 tcp_v6_inbound_md5_hash 469 411 -33,-25 restricted_pointer 434 420 -14,+0 irq_exit 162 154 -8,+0 get_perf_callchain 638 624 -14,+0 rt_mutex_trylock 169 156 -13,+0 avc_has_extended_perms 1092 1089 -3,+0 avc_has_perm_noaudit 309 306 -3,+0 __perf_sw_event 138 122 -16,+0 perf_swevent_get_recursion_context 116 102 -14,+0 __local_bh_enable_ip 93 72 -21,+0 xfrm_input 4175 4161 -14,+0 avc_has_perm 446 443 -3,+0 vm_events_fold_cpu 57 56 -1,+0 vfree 68 61 -7,+0 freeze_processes 203 230 +31,-4 _local_bh_enable 44 30 -14,+0 ip_do_fragment 1982 1944 -38,+0 do_exit 2995 3027 -43,+75 __do_softirq 742 724 -18,+0 cpu_init 1510 1489 -21,+0 account_system_time 80 79 -1,+0 total 12985281 12984819 -742,+280 Reported-by: Nadav Amit Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar

x86/percpu: Fix this_cpu_read()

2018-10-14T09:11:22Z

Eric reported that a sequence count loop using this_cpu_read() got optimized out. This is wrong, this_cpu_read() must imply READ_ONCE() because the interface is IRQ-safe, therefore an interrupt can have changed the per-cpu value. Fixes: 7c3576d261ce ("[PATCH] i386: Convert PDA into the percpu section") Reported-by: Eric Dumazet Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Acked-by: Eric Dumazet Cc: hpa@zytor.com Cc: eric.dumazet@gmail.com Cc: bp@alien8.de Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181011104019.748208519@infradead.org

x86/asm: Use CC_SET/CC_OUT in percpu_cmpxchg8b_double() to micro-optimize code generation

2018-06-21T13:21:47Z

Use CC_SET(z)/CC_OUT(z) instead of explicit SETZ instruction. Using these two defines, the compiler that supports generation of condition code outputs from inline assembly flags generates e.g.: cmpxchg8b %fs:(%esi) jne 172255 <__kmalloc+0x65> instead of: cmpxchg8b %fs:(%esi) sete %al test %al,%al je 172255 <__kmalloc+0x65> Note that older compilers now generate: cmpxchg8b %fs:(%esi) sete %cl test %cl,%cl je 173a85 <__kmalloc+0x65> since we have to mark that cmpxchg8b instruction outputs to %eax register and this way clobbers the value in the register. Signed-off-by: Uros Bizjak Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: https://lore.kernel.org/lkml/20180605163910.13015-1-ubizjak@gmail.com Signed-off-by: Ingo Molnar

x86/asm: Add instruction suffixes to bitops

2018-02-28T14:18:41Z

Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream gas in the future (mine does already). Add the missing suffixes here. Note that for 64-bit this means some operations change from being 32-bit to 64-bit. Signed-off-by: Jan Beulich Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/5A93F98702000078001ABACC@prv-mh.provo.novell.com

Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflicts

2017-11-07T09:53:06Z

Conflicts: arch/x86/kernel/cpu/Makefile Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/asm: Remove unnecessary \n\t in front of CC_SET() from asm templates

2017-09-24T09:19:01Z

There is no need for \n\t in front of CC_SET(), as the macro already includes these two. Signed-off-by: Uros Bizjak Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20170906151808.5634-1-ubizjak@gmail.com Signed-off-by: Ingo Molnar

x86: Remove x86_test_and_clear_bit_percpu()

2016-11-18T11:07:57Z

Upon removal of the "is_idle" flag, x86_test_and_clear_bit_percpu() is no longer used. Signed-off-by: Len Brown Acked-by: Ingo Molnar Acked-by: Peter Zijlstra (Intel) Link: http://lkml.kernel.org/r/b334ae6819507e3dfc0a4b33ed974714d067eb4a.1479449716.git.len.brown@intel.com Signed-off-by: Thomas Gleixner

percpu: eliminate two sparse warnings

2016-09-22T16:14:29Z

Fix two cases where a __percpu pointer cast drops __percpu. Signed-off-by: Lance Richardson Signed-off-by: Tejun Heo