wireguard-linux/arch/x86/kernel/acpi, branch update-toolchain

x86/acpi: Remove __ro_after_init from acpi_mp_wake_mailbox

2024-08-07T18:04:38Z

On a platform using the "Multiprocessor Wakeup Structure"[1] to startup secondary CPUs the control processor needs to memremap() the physical address of the MP Wakeup Structure mailbox to the variable acpi_mp_wake_mailbox, which holds the virtual address of mailbox. To wake up the AP the control processor writes the APIC ID of AP, the wakeup vector and the ACPI_MP_WAKE_COMMAND_WAKEUP command into the mailbox. Current implementation doesn't consider the case which restricts boot time CPU bringup to 1 with the kernel parameter "maxcpus=1" and brings other CPUs online later from user space as it sets acpi_mp_wake_mailbox to read-only after init. So when the first AP is tried to brought online after init, the attempt to update the variable results in a kernel panic. The memremap() call that initializes the variable cannot be moved into acpi_parse_mp_wake() because memremap() is not functional at that point in the boot process. Also as the APs might never be brought up, keep the memremap() call in acpi_wakeup_cpu() so that the operation only takes place when needed. Fixes: 24dd05da8c79 ("x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init") Signed-off-by: Zhiquan Li Signed-off-by: Thomas Gleixner Reviewed-by: Kirill A. Shutemov Link: https://lore.kernel.org/all/20240805103531.1230635-1-zhiquan1.li@intel.com

x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method

2024-06-17T15:46:25Z

MADT Multiprocessor Wakeup structure version 1 brings support for CPU offlining: BIOS provides a reset vector where the CPU has to jump to for offlining itself. The new TEST mailbox command can be used to test whether the CPU offlined itself which means the BIOS has control over the CPU and can online it again via the ACPI MADT wakeup method. Add CPU offlining support for the ACPI MADT wakeup method by implementing custom cpu_die(), play_dead() and stop_this_cpu() SMP operations. CPU offlining makes it possible to hand over secondary CPUs over kexec, not limiting the second kernel to a single CPU. The change conforms to the approved ACPI spec change proposal. See the Link. Signed-off-by: Kirill A. Shutemov Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Kuppuswamy Sathyanarayanan Reviewed-by: Thomas Gleixner Acked-by: Kai Huang Acked-by: Rafael J. Wysocki Tested-by: Tao Liu Link: https://lore.kernel.org/all/13356251.uLZWGnKmhe@kreacher Link: https://lore.kernel.org/r/20240614095904.1345461-19-kirill.shutemov@linux.intel.com

x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case

2024-06-17T15:46:17Z

ACPI MADT doesn't allow to offline a CPU after it was onlined. This limits kexec: the second kernel won't be able to use more than one CPU. To prevent a kexec kernel from onlining secondary CPUs, invalidate the mailbox address in the ACPI MADT wakeup structure which prevents a kexec kernel to use it. This is safe as the booting kernel has the mailbox address cached already and acpi_wakeup_cpu() uses the cached value to bring up the secondary CPUs. Note: This is a Linux specific convention and not covered by the ACPI specification. Signed-off-by: Kirill A. Shutemov Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Kai Huang Reviewed-by: Kuppuswamy Sathyanarayanan Reviewed-by: Thomas Gleixner Acked-by: Rafael J. Wysocki Tested-by: Tao Liu Link: https://lore.kernel.org/r/20240614095904.1345461-16-kirill.shutemov@linux.intel.com

x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure

2024-06-17T15:46:15Z

In order to support MADT wakeup structure version 1, provide more appropriate names for the fields in the structure. Rename 'mailbox_version' to 'version'. This field signifies the version of the structure and the related protocols, rather than the version of the mailbox. This field has not been utilized in the code thus far. Rename 'base_address' to 'mailbox_address' to clarify the kind of address it represents. In version 1, the structure includes the reset vector address. Clear and distinct naming helps to prevent any confusion. Signed-off-by: Kirill A. Shutemov Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Kai Huang Reviewed-by: Kuppuswamy Sathyanarayanan Reviewed-by: Thomas Gleixner Acked-by: Rafael J. Wysocki Tested-by: Tao Liu Link: https://lore.kernel.org/r/20240614095904.1345461-15-kirill.shutemov@linux.intel.com

cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup

2024-06-17T15:45:34Z

ACPI MADT doesn't allow to offline a CPU after it has been woken up. Currently, CPU hotplug is prevented based on the confidential computing attribute which is set for Intel TDX. But TDX is not the only possible user of the wake up method. Any platform that uses ACPI MADT wakeup method cannot offline CPU. Disable CPU offlining on ACPI MADT wakeup enumeration. This has no visible effects for users: currently, TDX guest is the only platform that uses the ACPI MADT wakeup method. Signed-off-by: Kirill A. Shutemov Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Thomas Gleixner Acked-by: Rafael J. Wysocki Tested-by: Tao Liu Link: https://lore.kernel.org/r/20240614095904.1345461-5-kirill.shutemov@linux.intel.com

x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init

2024-06-17T15:45:28Z

acpi_mp_wake_mailbox_paddr and acpi_mp_wake_mailbox are initialized once during ACPI MADT init and never changed. Signed-off-by: Kirill A. Shutemov Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Baoquan He Reviewed-by: Thomas Gleixner Acked-by: Kai Huang Acked-by: Rafael J. Wysocki Tested-by: Tao Liu Link: https://lore.kernel.org/r/20240614095904.1345461-3-kirill.shutemov@linux.intel.com

x86/acpi: Extract ACPI MADT wakeup code into a separate file

2024-06-17T15:45:25Z

In order to prepare for the expansion of support for the ACPI MADT wakeup method, move the relevant code into a separate file. Introduce a new configuration option to clearly indicate dependencies without the use of ifdefs. There have been no functional changes. Signed-off-by: Kirill A. Shutemov Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Baoquan He Reviewed-by: Kuppuswamy Sathyanarayanan Reviewed-by: Thomas Gleixner Acked-by: Borislav Petkov (AMD) Acked-by: Kai Huang Acked-by: Rafael J. Wysocki Tested-by: Tao Liu Link: https://lore.kernel.org/r/20240614095904.1345461-2-kirill.shutemov@linux.intel.com

Merge tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2024-03-13T18:54:05Z

Pull ACPI updates from Rafael Wysocki: "These modify the ACPI device events and processor enumeration code to take the 'enabled' _STA bit into account as mandated by the ACPI specification, convert several platform drivers to using a remove callback that returns void, add some new quirks for ACPI IRQ override and other things, address assorted issues and clean up code. Specifics: - Rearrange Device Check and Bus Check notification handling in the ACPI device hotplug code to make it get the "enabled" _STA bit into account (Rafael Wysocki) - Modify acpi_processor_add() to skip processors with the "enabled" _STA bit clear, as per the specification (Rafael Wysocki) - Stop failing Device Check notification handling without a valid reason (Rafael Wysocki) - Defer enumeration of devices that depend on a device with an ACPI device ID equalt to INTC10CF to address probe ordering issues on some platforms (Wentong Wu) - Constify acpi_bus_type (Ricardo Marliere) - Make the ACPI-specific suspend-to-idle code take the Low-Power S0 Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki) - Add ACPI IRQ override quirks for some new platforms (Sergey Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk, Nicolas Haye) - Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy Shevchenko) - Fix a memory leak in acpi_processor_power_exit() (Armin Wolf) - Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus) - Prevent false-positive static checker warnings from triggering by intializing some variables in the ACPI thermal code to zero (Colin Ian King) - Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and make that function generic (Hans de Goede) - Make the ACPI backlight code handle fetching EDID that is longer than 256 bytes (Mario Limonciello) - Skip initialization of GHES_ASSIST structures for Machine Check Architecture in APEI (Avadhut Naik) - Convert several plaform drivers in the ACPI subsystem to using a remove callback that returns void (Uwe Kleine-König) - Drop the long-deprecated custom_method debugfs interface that is problematic from the security standpoint (Rafael Wysocki) - Use %pe in a couple of places in the ACPI code for easier error decoding (Onkarnath) - Fix register width information handling during system memory accesses in the ACPI CPPC library (Jarred White) - Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC library (Perry Yuan)" * tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) ACPI: resource: Use IRQ override on Maibenben X565 ACPI: CPPC: Use access_width over bit_width for system memory accesses ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture ACPI: scan: Consolidate Device Check and Bus Check notification handling ACPI: scan: Rework Device Check and Bus Check notification handling ACPI: scan: Make acpi_processor_add() check the device enabled bit ACPI: scan: Relocate acpi_bus_trim_one() ACPI: scan: Fix device check notification handling ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override ACPI: pfr_update: Convert to platform remove callback returning void ACPI: pfr_telemetry: Convert to platform remove callback returning void ACPI: fan: Convert to platform remove callback returning void ACPI: GED: Convert to platform remove callback returning void ACPI: DPTF: Convert to platform remove callback returning void ACPI: AGDI: Convert to platform remove callback returning void ACPI: TAD: Convert to platform remove callback returning void ACPI: APEI: GHES: Convert to platform remove callback returning void ACPI: property: Polish ignoring bad data nodes ACPI: thermal_lib: Initialize temp_decik to zero ...

Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2024-03-13T18:40:06Z

Pull power management updates from Rafael Wysocki: "From the functional perspective, the most significant change here is the addition of support for Energy Models that can be updated dynamically at run time. There is also the addition of LZ4 compression support for hibernation, the new preferred core support in amd-pstate, new platforms support in the Intel RAPL driver, new model-specific EPP handling in intel_pstate and more. Apart from that, the cpufreq default transition delay is reduced from 10 ms to 2 ms (along with some related adjustments), the system suspend statistics code undergoes a significant rework and there is a usual bunch of fixes and code cleanups all over. Specifics: - Allow the Energy Model to be updated dynamically (Lukasz Luba) - Add support for LZ4 compression algorithm to the hibernation image creation and loading code (Nikhil V) - Fix and clean up system suspend statistics collection (Rafael Wysocki) - Simplify device suspend and resume handling in the power management core code (Rafael Wysocki) - Fix PCI hibernation support description (Yiwei Lin) - Make hibernation take set_memory_ro() return values into account as appropriate (Christophe Leroy) - Set mem_sleep_current during kernel command line setup to avoid an ordering issue with handling it (Maulik Shah) - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a driver's system suspend callback (Qingliang Li) - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus) - Add a tracepoint for runtime_status changes tracking (Vilas Bhat) - Fix section title markdown in the runtime PM documentation (Yiwei Lin) - Enable preferred core support in the amd-pstate cpufreq driver (Meng Li) - Fix min_perf assignment in amd_pstate_adjust_perf() and make the min/max limit perf values in amd-pstate always stay within the (highest perf, lowest perf) range (Tor Vic, Meng Li) - Allow intel_pstate to assign model-specific values to strings used in the EPP sysfs interface and make it do so on Meteor Lake (Srinivas Pandruvada) - Drop long-unused cpudata::prev_cummulative_iowait from the intel_pstate cpufreq driver (Jiri Slaby) - Prevent scaling_cur_freq from exceeding scaling_max_freq when the latter is an inefficient frequency (Shivnandan Kumar) - Change default transition delay in cpufreq to 2ms (Qais Yousef) - Remove references to 10ms minimum sampling rate from comments in the cpufreq code (Pierre Gondois) - Honour transition_latency over transition_delay_us in cpufreq (Qais Yousef) - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar) - General enhancements / cleanups to ARM cpufreq drivers (tianyu2, Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova) - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan) - Make the SCMI cpufreq driver get a transition delay value from firmware (Pierre Gondois) - Prevent the haltpoll cpuidle governor from shrinking guest poll_limit_ns below grow_start (Parshuram Sangle) - Avoid potential overflow in integer multiplication when computing cpuidle state parameters (C Cheng) - Adjust MWAIT hint target C-state computation in the ACPI cpuidle driver and in intel_idle to return a correct value for C0 (He Rongguang) - Address multiple issues in the TPMI RAPL driver and add support for new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui) - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel Lezcano) - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li) - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth Norway Ananda) - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil) - Fix a couple of warnings in the OPP core code related to W=1 builds (Viresh Kumar) - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh Kumar) - Extend dev_pm_opp_data with turbo support (Sibi Sankar) - dt-bindings: drop maxItems from inner items (David Heidelberg)" * tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits) dt-bindings: opp: drop maxItems from inner items OPP: debugfs: Fix warning around icc_get_name() OPP: debugfs: Fix warning with W=1 builds cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h OPP: Extend dev_pm_opp_data with turbo support Fix cpupower-frequency-info.1 man page typo cpufreq: scmi: Set transition_delay_us firmware: arm_scmi: Populate fast channel rate_limit firmware: arm_scmi: Populate perf commands rate_limit cpuidle: ACPI/intel: fix MWAIT hint target C-state computation PM: sleep: wakeirq: fix wake irq warning in system suspend powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function cpufreq: Don't unregister cpufreq cooling on CPU hotplug PM: suspend: Set mem_sleep_current during kernel command line setup cpufreq: Honour transition_latency over transition_delay_us cpufreq: Limit resolving a frequency to policy min/max Documentation: PM: Fix runtime_pm.rst markdown syntax cpufreq: amd-pstate: adjust min/max limit perf cpufreq: Remove references to 10ms min sampling rate cpufreq: intel_pstate: Update default EPPs for Meteor Lake ...

Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-03-12T02:53:15Z

Pull core x86 updates from Ingo Molnar: - The biggest change is the rework of the percpu code, to support the 'Named Address Spaces' GCC feature, by Uros Bizjak: - This allows C code to access GS and FS segment relative memory via variables declared with such attributes, which allows the compiler to better optimize those accesses than the previous inline assembly code. - The series also includes a number of micro-optimizations for various percpu access methods, plus a number of cleanups of %gs accesses in assembly code. - These changes have been exposed to linux-next testing for the last ~5 months, with no known regressions in this area. - Fix/clean up __switch_to()'s broken but accidentally working handling of FPU switching - which also generates better code - Propagate more RIP-relative addressing in assembly code, to generate slightly better code - Rework the CPU mitigations Kconfig space to be less idiosyncratic, to make it easier for distros to follow & maintain these options - Rework the x86 idle code to cure RCU violations and to clean up the logic - Clean up the vDSO Makefile logic - Misc cleanups and fixes * tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) x86/idle: Select idle routine only once x86/idle: Let prefer_mwait_c1_over_halt() return bool x86/idle: Cleanup idle_setup() x86/idle: Clean up idle selection x86/idle: Sanitize X86_BUG_AMD_E400 handling sched/idle: Conditionally handle tick broadcast in default_idle_call() x86: Increase brk randomness entropy for 64-bit systems x86/vdso: Move vDSO to mmap region x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o x86/retpoline: Ensure default return thunk isn't used at runtime x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32 x86/vdso: Use $(addprefix ) instead of $(foreach ) x86/vdso: Simplify obj-y addition x86/vdso: Consolidate targets and clean-files x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS ...