wireguard-linux/arch/x86/kernel, branch jd/orphan-parallel

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2020-10-23T18:17:56Z

Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ...

Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block

2020-10-23T17:06:38Z

Pull arch task_work cleanups from Jens Axboe: "Two cleanups that don't fit other categories: - Finally get the task_work_add() cleanup done properly, so we don't have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates all callers, and also fixes up the documentation for task_work_add(). - While working on some TIF related changes for 5.11, this TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch duplication for how that is handled" * tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block: task_work: cleanup notification modes tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()

Merge branch 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2020-10-22T16:59:21Z

Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode

task_work: cleanup notification modes

2020-10-17T21:05:30Z

A previous commit changed the notification mode from true/false to an int, allowing notify-no, notify-yes, or signal-notify. This was backwards compatible in the sense that any existing true/false user would translate to either 0 (on notification sent) or 1, the latter which mapped to TWA_RESUME. TWA_SIGNAL was assigned a value of 2. Clean this up properly, and define a proper enum for the notification mode. Now we have: - TWA_NONE. This is 0, same as before the original change, meaning no notification requested. - TWA_RESUME. This is 1, same as before the original change, meaning that we use TIF_NOTIFY_RESUME. - TWA_SIGNAL. This uses TIF_SIGPENDING/JOBCTL_TASK_WORK for the notification. Clean up all the callers, switching their 0/1/false/true to using the appropriate TWA_* mode for notifications. Fixes: e91b48162332 ("task_work: teach task_work_add() to do signal_wake_up()") Reviewed-by: Thomas Gleixner Signed-off-by: Jens Axboe

Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

2020-10-15T22:48:06Z

Pull another Hyper-V update from Wei Liu: "One patch from Michael to get VMbus interrupt from ACPI DSDT" * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Add parsing of VMbus interrupt in ACPI DSDT

Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping

2020-10-15T21:43:29Z

Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge into dma-mapping: move large parts of to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove dma-mapping: merge into dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...

Merge tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

2020-10-14T21:32:52Z

Pull kernel_clone() updates from Christian Brauner: "During the v5.9 merge window we reworked the process creation codepaths across multiple architectures. After this work we were only left with the _do_fork() helper based on the struct kernel_clone_args calling convention. As was pointed out _do_fork() isn't valid kernelese especially for a helper that isn't just static. This series removes the _do_fork() helper and introduces the new kernel_clone() helper. The process creation cleanup didn't change the name to something more reasonable mainly because _do_fork() was used in quite a few places. So sending this as a separate series seemed the better strategy. I originally intended to send this early in the v5.9 development cycle after the merge window had closed but given that this was touching quite a few places I decided to defer this until the v5.10 merge window" * tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: sched: remove _do_fork() tracing: switch to kernel_clone() kgdbts: switch to kernel_clone() kprobes: switch to kernel_clone() x86: switch to kernel_clone() sparc: switch to kernel_clone() nios2: switch to kernel_clone() m68k: switch to kernel_clone() ia64: switch to kernel_clone() h8300: switch to kernel_clone() fork: introduce kernel_clone()

Drivers: hv: vmbus: Add parsing of VMbus interrupt in ACPI DSDT

2020-10-14T19:14:51Z

On ARM64, Hyper-V now specifies the interrupt to be used by VMbus in the ACPI DSDT. This information is not used on x86 because the interrupt vector must be hardcoded. But update the generic VMbus driver to do the parsing and pass the information to the architecture specific code that sets up the Linux IRQ. Update consumers of the interrupt to get it from an architecture specific function. Signed-off-by: Michael Kelley Link: https://lore.kernel.org/r/1597434304-40631-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu

Merge tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2020-10-14T18:42:04Z

Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL " debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL " ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ...

Merge tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-10-14T17:21:34Z

Pull x86 SEV-ES support from Borislav Petkov: "SEV-ES enhances the current guest memory encryption support called SEV by also encrypting the guest register state, making the registers inaccessible to the hypervisor by en-/decrypting them on world switches. Thus, it adds additional protection to Linux guests against exfiltration, control flow and rollback attacks. With SEV-ES, the guest is in full control of what registers the hypervisor can access. This is provided by a guest-host exchange mechanism based on a new exception vector called VMM Communication Exception (#VC), a new instruction called VMGEXIT and a shared Guest-Host Communication Block which is a decrypted page shared between the guest and the hypervisor. Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest so in order for that exception mechanism to work, the early x86 init code needed to be made able to handle exceptions, which, in itself, brings a bunch of very nice cleanups and improvements to the early boot code like an early page fault handler, allowing for on-demand building of the identity mapping. With that, !KASLR configurations do not use the EFI page table anymore but switch to a kernel-controlled one. The main part of this series adds the support for that new exchange mechanism. The goal has been to keep this as much as possibly separate from the core x86 code by concentrating the machinery in two SEV-ES-specific files: arch/x86/kernel/sev-es-shared.c arch/x86/kernel/sev-es.c Other interaction with core x86 code has been kept at minimum and behind static keys to minimize the performance impact on !SEV-ES setups. Work by Joerg Roedel and Thomas Lendacky and others" * tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits) x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer x86/sev-es: Check required CPU features for SEV-ES x86/efi: Add GHCB mappings when SEV-ES is active x86/sev-es: Handle NMI State x86/sev-es: Support CPU offline/online x86/head/64: Don't call verify_cpu() on starting APs x86/smpboot: Load TSS and getcpu GDT entry before loading IDT x86/realmode: Setup AP jump table x86/realmode: Add SEV-ES specific trampoline entry point x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES x86/sev-es: Handle #DB Events x86/sev-es: Handle #AC Events x86/sev-es: Handle VMMCALL Events x86/sev-es: Handle MWAIT/MWAITX Events x86/sev-es: Handle MONITOR/MONITORX Events x86/sev-es: Handle INVD Events x86/sev-es: Handle RDPMC Events x86/sev-es: Handle RDTSC(P) Events ...