wireguard-linux/drivers/acpi/apei, branch jd/orphan-parallel

Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block

2020-10-23T17:06:38Z

Pull arch task_work cleanups from Jens Axboe: "Two cleanups that don't fit other categories: - Finally get the task_work_add() cleanup done properly, so we don't have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates all callers, and also fixes up the documentation for task_work_add(). - While working on some TIF related changes for 5.11, this TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch duplication for how that is handled" * tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block: task_work: cleanup notification modes tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()

Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2020-10-22T19:41:00Z

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...

task_work: cleanup notification modes

2020-10-17T21:05:30Z

A previous commit changed the notification mode from true/false to an int, allowing notify-no, notify-yes, or signal-notify. This was backwards compatible in the sense that any existing true/false user would translate to either 0 (on notification sent) or 1, the latter which mapped to TWA_RESUME. TWA_SIGNAL was assigned a value of 2. Clean this up properly, and define a proper enum for the notification mode. Now we have: - TWA_NONE. This is 0, same as before the original change, meaning no notification requested. - TWA_RESUME. This is 1, same as before the original change, meaning that we use TIF_NOTIFY_RESUME. - TWA_SIGNAL. This uses TIF_SIGPENDING/JOBCTL_TASK_WORK for the notification. Clean up all the callers, switching their 0/1/false/true to using the appropriate TWA_* mode for notifications. Fixes: e91b48162332 ("task_work: teach task_work_add() to do signal_wake_up()") Reviewed-by: Thomas Gleixner Signed-off-by: Jens Axboe

ACPI / APEI: Add a notifier chain for unknown (vendor) CPER records

2020-09-16T09:30:42Z

CPER records describing a firmware-first error are identified by GUID. The ghes driver currently logs, but ignores any unknown CPER records. This prevents describing errors that can't be represented by a standard entry, that would otherwise allow a driver to recover from an error. The UEFI spec calls these 'Non-standard Section Body' (N.2.3 of version 2.8). Add a notifier chain for these non-standard/vendor-records. Callers must identify their type of records by GUID. Record data is copied to memory from the ghes_estatus_pool to allow us to keep it until after the notifier has run. Co-developed-by: James Morse Link: https://lore.kernel.org/r/20200903123456.1823-2-shiju.jose@huawei.com Signed-off-by: James Morse Signed-off-by: Shiju Jose Signed-off-by: Lorenzo Pieralisi Acked-by: "Rafael J. Wysocki"

ACPI: OSL: Change the type of acpi_os_map_generic_address() return value

2020-09-11T14:45:00Z

Modify acpi_os_map_generic_address() to return the pointer returned by acpi_os_map_iomem() which represents the logical address corresponding to the struct acpi_generic_address argument passed to it or NULL if that address cannot be obtained (for example, the argument does not represent an address in system memory or it could not be mapped by the OS). Among other things, that will allow the ACPI OS layer to pass the logical addresses of the FADT GPE blocks 0 and 1 to ACPICA going forward. Signed-off-by: Rafael J. Wysocki

ACPI: APEI: remove redundant assignment to variable rc

2020-07-27T13:22:58Z

The variable rc is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King Signed-off-by: Rafael J. Wysocki

Merge tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2020-06-02T20:25:52Z

Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20200430, fix several reference counting errors related to ACPI tables, add _Exx / _Lxx support to the GED driver, add a new acpi_evaluate_reg() helper, add new DPTF battery participant driver and extend the DPFT power participant driver, improve the handling of memory failures in the APEI code, add a blacklist entry to the backlight driver, update the PMIC driver and the processor idle driver, fix two kobject reference count leaks, and make a few janitory changes. Specifics: - Update the ACPICA code in the kernel to upstream revision 20200430: - Move acpi_gbl_next_cmd_num definition (Erik Kaneda). - Ignore AE_ALREADY_EXISTS status in the disassembler when parsing create operators (Erik Kaneda). - Add status checks to the dispatcher (Erik Kaneda). - Fix required parameters for _NIG and _NIH (Erik Kaneda). - Make acpi_protocol_lengths static (Yue Haibing). - Fix ACPI table reference counting errors in several places, mostly in error code paths (Hanjun Guo). - Extend the Generic Event Device (GED) driver to support _Exx and _Lxx handler methods (Ard Biesheuvel). - Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug code to use it (Hans de Goede). - Add new DPTF battery participant driver and make the DPFT power participant driver create more sysfs device attributes (Srinivas Pandruvada). - Improve the handling of memory failures in APEI (James Morse). - Add new blacklist entry for Acer TravelMate 5735Z to the backlight driver (Paul Menzel). - Add i2c address for thermal control to the PMIC driver (Mauro Carvalho Chehab). - Allow the ACPI processor idle driver to work on platforms with only one ACPI C-state present (Zhang Rui). - Fix kobject reference count leaks in error code paths in two places (Qiushi Wu). - Delete unused proc filename macros and make some symbols static (Pascal Terjan, Zheng Zengkai, Zou Wei)" * tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe() ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile() ACPI: GED: use correct trigger type field in _Exx / _Lxx handling ACPI: DPTF: Add battery participant driver ACPI: DPTF: Additional sysfs attributes for power participant driver ACPI: video: Use native backlight on Acer TravelMate 5735Z arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work ACPI: APEI: Kick the memory_failure() queue for synchronous errors mm/memory-failure: Add memory_failure_queue_kick() ACPI / PMIC: Add i2c address for thermal control ACPI: GED: add support for _Exx / _Lxx handler methods ACPI: Delete unused proc filename macros ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper ACPI: utils: Add acpi_evaluate_reg() helper ACPI: debug: Make two functions static ACPI: sleep: Put the FACS table after using it ACPI: scan: Put SPCR and STAO table after using it ACPI: EC: Put the ACPI table after using it ACPI: APEI: Put the HEST table for error path ACPI: APEI: Put the error record serialization table for error path ...

mm: remove vmalloc_sync_(un)mappings()

2020-06-02T17:59:12Z

These functions are not needed anymore because the vmalloc and ioremap mappings are now synchronized when they are created or torn down. Remove all callers and function definitions. Signed-off-by: Joerg Roedel Signed-off-by: Andrew Morton Tested-by: Steven Rostedt (VMware) Acked-by: Andy Lutomirski Acked-by: Peter Zijlstra (Intel) Cc: Arnd Bergmann Cc: Christoph Hellwig Cc: Dave Hansen Cc: "H . Peter Anvin" Cc: Ingo Molnar Cc: Matthew Wilcox (Oracle) Cc: Michal Hocko Cc: "Rafael J. Wysocki" Cc: Thomas Gleixner Cc: Vlastimil Babka Link: http://lkml.kernel.org/r/20200515140023.25469-7-joro@8bytes.org Signed-off-by: Linus Torvalds

Merge branches 'acpi-apei', 'acpi-pmic', 'acpi-video' and 'acpi-dptf'

2020-06-01T15:19:43Z

* acpi-apei: arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work ACPI: APEI: Kick the memory_failure() queue for synchronous errors mm/memory-failure: Add memory_failure_queue_kick() * acpi-pmic: ACPI / PMIC: Add i2c address for thermal control * acpi-video: ACPI: video: Use native backlight on Acer TravelMate 5735Z * acpi-dptf: ACPI: DPTF: Add battery participant driver ACPI: DPTF: Additional sysfs attributes for power participant driver

ACPI: APEI: Kick the memory_failure() queue for synchronous errors

2020-05-19T17:51:11Z

memory_failure() offlines or repairs pages of memory that have been discovered to be corrupt. These may be detected by an external component, (e.g. the memory controller), and notified via an IRQ. In this case the work is queued as not all of memory_failure()s work can happen in IRQ context. If the error was detected as a result of user-space accessing a corrupt memory location the CPU may take an abort instead. On arm64 this is a 'synchronous external abort', and on a firmware first system it is replayed using NOTIFY_SEA. This notification has NMI like properties, (it can interrupt IRQ-masked code), so the memory_failure() work is queued. If we return to user-space before the queued memory_failure() work is processed, we will take the fault again. This loop may cause platform firmware to exceed some threshold and reboot when Linux could have recovered from this error. For NMIlike notifications keep track of whether memory_failure() work was queued, and make task_work pending to flush out the queue. To save memory allocations, the task_work is allocated as part of the ghes_estatus_node, and free()ing it back to the pool is deferred. Signed-off-by: James Morse Tested-by: Tyler Baicar Signed-off-by: Rafael J. Wysocki