wireguard-linux/drivers/base, branch update-toolchain

driver core: Fix uevent_show() vs driver detach race

2024-07-31T12:41:44Z

uevent_show() wants to de-reference dev->driver->name. There is no clean way for a device attribute to de-reference dev->driver unless that attribute is defined via (struct device_driver).dev_groups. Instead, the anti-pattern of taking the device_lock() in the attribute handler risks deadlocks with code paths that remove device attributes while holding the lock. This deadlock is typically invisible to lockdep given the device_lock() is marked lockdep_set_novalidate_class(), but some subsystems allocate a local lockdep key for @dev->mutex to reveal reports of the form: ====================================================== WARNING: possible circular locking dependency detected 6.10.0-rc7+ #275 Tainted: G OE N ------------------------------------------------------ modprobe/2374 is trying to acquire lock: ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220 but task is already holding lock: ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&cxl_root_key){+.+.}-{3:3}: __mutex_lock+0x99/0xc30 uevent_show+0xac/0x130 dev_attr_show+0x18/0x40 sysfs_kf_seq_show+0xac/0xf0 seq_read_iter+0x110/0x450 vfs_read+0x25b/0x340 ksys_read+0x67/0xf0 do_syscall_64+0x75/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (kn->active#6){++++}-{0:0}: __lock_acquire+0x121a/0x1fa0 lock_acquire+0xd6/0x2e0 kernfs_drain+0x1e9/0x200 __kernfs_remove+0xde/0x220 kernfs_remove_by_name_ns+0x5e/0xa0 device_del+0x168/0x410 device_unregister+0x13/0x60 devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1c7/0x210 driver_detach+0x47/0x90 bus_remove_driver+0x6c/0xf0 cxl_acpi_exit+0xc/0x11 [cxl_acpi] __do_sys_delete_module.isra.0+0x181/0x260 do_syscall_64+0x75/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e The observation though is that driver objects are typically much longer lived than device objects. It is reasonable to perform lockless de-reference of a @driver pointer even if it is racing detach from a device. Given the infrequency of driver unregistration, use synchronize_rcu() in module_remove_driver() to close any potential races. It is potentially overkill to suffer synchronize_rcu() just to handle the rare module removal racing uevent_show() event. Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1]. Fixes: c0a40097f0bc ("drivers: core: synchronize really_probe() and dev_uevent()") Reported-by: syzbot+4762dd74e32532cda5ff@syzkaller.appspotmail.com Reported-by: Tetsuo Handa Closes: http://lore.kernel.org/5aa5558f-90a4-4864-b1b1-5d6784c5607d@I-love.SAKURA.ne.jp [1] Link: http://lore.kernel.org/669073b8ea479_5fffa294c1@dwillia2-xfh.jf.intel.com.notmuch Cc: stable@vger.kernel.org Cc: Ashish Sangwan Cc: Namjae Jeon Cc: Dirk Behme Cc: Greg Kroah-Hartman Cc: Rafael J. Wysocki Signed-off-by: Dan Williams Link: https://lore.kernel.org/r/172081332794.577428.9738802016494057132.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

2024-07-27T19:26:09Z

Pull regmap fix from Mark Brown: "Arnd sent a workaround for a false positive warning which was showing up with GCC 14.1" * tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: maple: work around gcc-14.1 false-positive warning

Merge tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2024-07-27T17:14:34Z

Pull more RISC-V updates from Palmer Dabbelt: - Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. - The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. - Support for HAVE_ARCH_STACKLEAK. - The sv39 linear map has been extended to support 128GiB mappings. - The frequency of the mtime CSR is now visible via hwprobe. * tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits) RISC-V: Provide the frequency of time CSR via hwprobe riscv: Extend sv39 linear mapping max size to 128G riscv: enable HAVE_ARCH_STACKLEAK riscv: signal: Remove unlikely() from WARN_ON() condition riscv: Improve exception and system call latency RISC-V: Select ACPI PPTT drivers riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init() RISC-V: ACPI: Enable SPCR table for console output on RISC-V riscv: boot: remove duplicated targets line trace: riscv: Remove deprecated kprobe on ftrace support riscv: cpufeature: Extract common elements from extension checking riscv: Introduce vendor variants of extension helpers riscv: Add vendor extensions to /proc/cpuinfo riscv: Extend cpufeature.c to detect vendor extensions RISC-V: run savedefconfig for defconfig RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init ACPI: NUMA: change the ACPI_NUMA to a hidden option ACPI: NUMA: Add handler for SRAT RINTC affinity structure ...

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2024-07-25T17:42:22Z

Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...

Merge tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2024-07-24T19:34:47Z

Pull dmaengine updates from Vinod Koul: "New support: - New dmaengine_prep_peripheral_dma_vec() to support transfers using dma vectors and documentation and user in AXI dma - STMicro STM32 DMA3 support and new capabilities of cyclic dma Updates: - Yaml conversion for Freescale imx dma and qdma bindings, sprd sc9860 dma binding - Altera msgdma updates for descriptor management" * tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits) dt-bindings: fsl-qdma: fix interrupts 'if' check logic dt-bindings: dma: sprd,sc9860-dma: convert to YAML dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro dmaengine: ti: add missing MODULE_DESCRIPTION() macros dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels dmaengine: sh: rz-dmac: Fix lockdep assert warning dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan() dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM dmaengine: qcom: gpi: remove unused struct 'reg_info' dmaengine: moxart-dma: remove unused struct 'moxart_filter_data' dt-bindings: fsl-qdma: Convert to yaml format dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated dmaengine: stm32-dma3: defer channel registration to specify channel name dmaengine: add channel device name to channel registration dmaengine: stm32-dma3: improve residue granularity dmaengine: stm32-dma3: add device_pause and device_resume ops dmaengine: stm32-dma3: add DMA_MEMCPY capability ...

Merge tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-07-22T21:02:19Z

Pull MSI interrupt updates from Thomas Gleixner: "Switch ARM/ARM64 over to the modern per device MSI domains. This simplifies the handling of platform MSI and wire to MSI controllers and removes about 500 lines of legacy code. Aside of that it paves the way for ARM/ARM64 to utilize the dynamic allocation of PCI/MSI interrupts and to support the upcoming non standard IMS (Interrupt Message Store) mechanism on PCIe devices" * tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/gic-v3-its: Correctly fish out the DID for platform MSI irqchip/gic-v3-its: Correctly honor the RID remapping genirq/msi: Move msi_device_data to core genirq/msi: Remove platform MSI leftovers irqchip/irq-mvebu-icu: Remove platform MSI leftovers irqchip/irq-mvebu-sei: Switch to MSI parent irqchip/mvebu-odmi: Switch to parent MSI irqchip/mvebu-gicp: Switch to MSI parent irqchip/irq-mvebu-icu: Prepare for real per device MSI irqchip/imx-mu-msi: Switch to MSI parent irqchip/gic-v2m: Switch to device MSI irqchip/gic_v3_mbi: Switch over to parent domain genirq/msi: Remove platform_msi_create_device_domain() irqchip/mbigen: Remove platform_msi_create_device_domain() fallback irqchip/gic-v3-its: Switch platform MSI to MSI parent irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI irqchip/mbigen: Prepare for real per device MSI irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X] irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX ...

Merge patch series "Add ACPI NUMA support for RISC-V"

2024-07-22T17:31:51Z

Haibo Xu says: This patch series enable RISC-V ACPI NUMA support which was based on the recently approved ACPI ECR[1]. Patch 1/4 add RISC-V specific acpi_numa.c file to parse NUMA information from SRAT and SLIT ACPI tables. Patch 2/4 add the common SRAT RINTC affinity structure handler. Patch 3/4 change the ACPI_NUMA to a hidden option since it would be selected by default on all supported platform. Patch 4/4 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid potential boot noise on ACPI platforms that are not NUMA. Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next [1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing Testing: Since the ACPI AIA/PLIC support patch set is still under upstream review, hence it is tested using the poll based HVC SBI console and RAM disk. 1) Build latest Qemu with the following patch backported https://github.com/vlsunil/qemu/commit/42bd4eeefd5d4410a68f02d54fee406d8a1269b0 2) Build latest EDK-II https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md 3) Build Linux with the following configs enabled CONFIG_RISCV_SBI_V01=y CONFIG_SERIAL_EARLYCON_RISCV_SBI=y CONFIG_NONPORTABLE=y CONFIG_HVC_RISCV_SBI=y CONFIG_NUMA=y CONFIG_ACPI_NUMA=y 4) Build buildroot rootfs.cpio 5) Launch the Qemu machine qemu-system-riscv64 -nographic \ -machine virt,pflash0=pflash0,pflash1=pflash1 -smp 4 -m 8G \ -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \ -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \ -object memory-backend-ram,size=4G,id=m0 \ -object memory-backend-ram,size=4G,id=m1 \ -numa node,memdev=m0,cpus=0-1,nodeid=0 \ -numa node,memdev=m1,cpus=2-3,nodeid=1 \ -numa dist,src=0,dst=1,val=30 \ -kernel linux/arch/riscv/boot/Image \ -initrd buildroot/output/images/rootfs.cpio \ -append "root=/dev/ram ro console=hvc0 earlycon=sbi" [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80000000-0x17fffffff] [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x180000000-0x27fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x17fe3bc40-0x17fe3cfff] [ 0.000000] NUMA: NODE_DATA [mem 0x27fff4c40-0x27fff5fff] ... [ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x0 -> Node 0 [ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x1 -> Node 0 [ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x2 -> Node 1 [ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x3 -> Node 1 * b4-shazam-merge: ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init ACPI: NUMA: change the ACPI_NUMA to a hidden option ACPI: NUMA: Add handler for SRAT RINTC affinity structure ACPI: RISCV: Add NUMA support based on SRAT and SLIT Link: https://lore.kernel.org/r/cover.1718268003.git.haibo1.xu@intel.com Signed-off-by: Palmer Dabbelt

ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init

2024-07-22T14:13:09Z

There are lots of ACPI enabled systems that aren't NUMA and If the firmware didn't provide the SRAT/SLIT, then there will be a message "Failed to initialise from firmware" from arch_acpi_numa_init() which adding noise to the boot on all of those kind of systems. Replace the pr_info with pr_debug in arch_acpi_numa_init() to avoid it. Suggested-by: Sunil V L Signed-off-by: Haibo Xu Reviewed-by: Sunil V L Reviewed-by: Hanjun Guo Link: https://lore.kernel.org/r/109354315a02cd22145d2effa4a8c571b69d3e56.1718268003.git.haibo1.xu@intel.com Signed-off-by: Palmer Dabbelt

regmap: maple: work around gcc-14.1 false-positive warning

2024-07-22T12:04:04Z

With gcc-14.1, there is a false-postive -Wuninitialized warning in regcache_maple_drop: drivers/base/regmap/regcache-maple.c: In function 'regcache_maple_drop': drivers/base/regmap/regcache-maple.c:113:23: error: 'lower_index' is used uninitialized [-Werror=uninitialized] 113 | unsigned long lower_index, lower_last; | ^~~~~~~~~~~ drivers/base/regmap/regcache-maple.c:113:36: error: 'lower_last' is used uninitialized [-Werror=uninitialized] 113 | unsigned long lower_index, lower_last; | ^~~~~~~~~~ I've created a reduced test case to see if this needs to be reported as a gcc, but it appears that the gcc-14.x branch already has a change that turns this into a more sensible -Wmaybe-uninitialized warning, so I ended up not reporting it so far. The reduced test case also produces a warning for gcc-13 and gcc-12 but I don't see that with the version in the kernel. Link: https://godbolt.org/z/oKbohKqd3 Link: https://lore.kernel.org/all/CAMuHMdWj=FLmkazPbYKPevDrcym2_HDb_U7Mb9YE9ovrP0jJfA@mail.gmail.com/ Signed-off-by: Arnd Bergmann Link: https://patch.msgid.link/20240719104030.1382465-1-arnd@kernel.org Signed-off-by: Mark Brown

genirq/msi: Remove platform MSI leftovers

2024-07-18T18:31:21Z

No more users! Signed-off-by: Thomas Gleixner Signed-off-by: Anna-Maria Behnsen Signed-off-by: Shivamurthy Shastri Signed-off-by: Thomas Gleixner Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20240623142235.943295676@linutronix.de