wireguard-linux/drivers/bluetooth/btrtl.c, branch jd/bump-compilers

Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B

2024-09-10T17:06:24Z

For tracking multiple devices concurrently with a condition. The patch enables the HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER quirk on RTL8852B controller. The quirk setting is based on commit 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") With this setting, when a pattern monitor detects a device, this feature issues an address monitor for tracking that device. Let the original pattern monitor keep monitor new devices. Signed-off-by: Hilda Wu Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btrtl: Use kvmemdup to simplify the code

2024-09-10T17:05:57Z

Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code. No functional change intended. Signed-off-by: Li Zetao Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btrtl: Add the support for RTL8922A

2024-09-10T17:05:28Z

Add the support for RTL8922A BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=8922 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C885A01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Max Chou Signed-off-by: Luiz Augusto von Dentz

Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-in

2024-08-15T17:07:55Z

This inverts the LE State quirk so by default we assume the controllers would report valid states rather than invalid which is how quirks normally behave, also this would result in HCI command failing it the LE States are really broken thus exposing the controllers that are really broken in this respect. Link: https://github.com/bluez/bluez/issues/584 Fixes: 220915857e29 ("Bluetooth: Adding driver and quirk defs for multi-role LE") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Use sizeof(*pointer) instead of sizeof(type)

2024-07-15T01:34:28Z

It is preferred to use sizeof(*pointer) instead of sizeof(type) due to the type of the variable can change and one needs not change the former (unlike the latter). This patch has no effect on runtime behavior. Signed-off-by: Erick Archer Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Populate hci_set_hw_info for Intel and Realtek

2024-05-14T14:51:05Z

The hardware information surfaced via debugfs might be usable by the userspace to set some configuration knobs. This patch sets the hw_info for Intel and Realtek chipsets. Below are some possible output of the hardware_info debugfs file. INTEL platform=55 variant=24 RTL lmp_subver=34898 hci_rev=10 hci_ver=11 hci_bus=1 Signed-off-by: Archie Pusaka Reviewed-by: Abhishek Pandit-Subedi Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btrtl: Add the support for RTL8852BT/RTL8852BE-VT

2024-03-06T22:22:36Z

Add the support for RTL8852BT/RTL8852BE-VT BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=8520 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Max Chou Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btrtl: Ignore error return for hci_devcd_register()

2023-10-14T03:03:04Z

If CONFIG_DEV_COREDUMP was not set, it would return -EOPNOTSUPP for hci_devcd_register(). In this commit, ignore error return for hci_devcd_register(). Otherwise Bluetooth initialization will be failed. Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support") Cc: stable@vger.kernel.org Reported-by: Kirill A. Shutemov Closes: https://lore.kernel.org/all/ZRyqIn0_qqEFBPdy@debian.me/T/ Signed-off-by: Max Chou Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C

2023-08-11T18:57:13Z

In this commit, prefer to load FW v2 if available. Fallback to FW v1 otherwise. This behavior is only for RTL8852C. Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support") Cc: stable@vger.kernel.org Suggested-by: Juerg Haefliger Tested-by: Hilda Wu Signed-off-by: Max Chou Signed-off-by: Luiz Augusto von Dentz

Bluetooth: msft: Extended monitor tracking by address filter

2023-08-11T18:39:58Z

Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu Signed-off-by: Hilda Wu Reviewed-by: Simon Horman Signed-off-by: Luiz Augusto von Dentz