wireguard-linux/drivers/char/tpm, branch jd/unified-crypt-queue

sysfs: remove redundant __compat_only_sysfs_link_entry_to_kobj fn

2020-04-05T18:34:35Z

Commit 9255782f7061 ("sysfs: Wrap __compat_only_sysfs_link_entry_to_kobj function to change the symlink name") made this function a wrapper around a new non-underscored function, which is a bit odd. The normal naming convention is the other way around: the underscored function is the wrappee, and the non-underscored function is the wrapper. There's only one single user (well, two call-sites in that user) of the more limited double underscore version of this function, so just remove the oddly named wrapper entirely and just add the extra NULL argument to the user. I considered just doing that in the merge, but that tends to make history really hard to read. Link: https://lore.kernel.org/lkml/CAHk-=wgkkmNV5tMzQDmPAQuNJBuMcry--Jb+h8H1o4RA3kF7QQ@mail.gmail.com/ Cc: Sourabh Jain Cc: Michael Ellerman Signed-off-by: Linus Torvalds

tpm: ibmvtpm: Add support for TPM2

2020-03-15T18:13:33Z

Support TPM2 in the IBM vTPM driver. The hypervisor tells us what version of TPM is connected through the vio_device_id. In case a TPM2 device is found, we set the TPM_CHIP_FLAG_TPM2 flag and get the command codes attributes table. The driver does not need the timeouts and durations, though. Signed-off-by: Stefan Berger Acked-by: Nayna Jain Tested-by: Nayna Jain Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: ibmvtpm: Wait for buffer to be set before proceeding

2020-03-15T18:12:52Z

Synchronize with the results from the CRQs before continuing with the initialization. This avoids trying to send TPM commands while the rtce buffer has not been allocated, yet. This patch fixes an existing race condition that may occurr if the hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE request sent during initialization and therefore the ibmvtpm->rtce_buf has not been allocated at the time the first TPM command is sent. Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Signed-off-by: Stefan Berger Acked-by: Nayna Jain Tested-by: Nayna Jain Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: of: Handle IBM,vtpm20 case when getting log parameters

2020-03-13T15:31:26Z

A vTPM 2.0 is identified by 'IBM,vtpm20' in the 'compatible' node in the device tree. Handle it in the same way as 'IBM,vtpm'. The vTPM 2.0's log is written in little endian format so that for this aspect we can rely on existing code. Signed-off-by: Stefan Berger Acked-by: Nayna Jain Tested-by: Nayna Jain Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: tpm_tis_spi_cr50: use new structure for SPI transfer delays

2020-03-13T01:53:16Z

In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm_tis_spi: use new 'delay' structure for SPI transfer delays

2020-03-13T01:53:16Z

In a recent change to the SPI subsystem [1], a new 'delay' struct was added to replace the 'delay_usecs'. This change replaces the current 'delay_usecs' with 'delay' for this driver. The 'spi_transfer_delay_exec()' function [in the SPI framework] makes sure that both 'delay_usecs' & 'delay' are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6485 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Alexandru Ardelean Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: tpm2_bios_measurements_next should increase position index

2020-03-13T01:53:16Z

If .next function does not change position index, following .show function will repeat output related to current position index. For /sys/kernel/security/tpm0/binary_bios_measurements: 1) read after lseek beyound end of file generates whole last line. 2) read after lseek to middle of last line generates expected end of last line and unexpected whole last line once again. Cc: stable@vger.kernel.org # 4.19.x Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: tpm1_bios_measurements_next should increase position index

2020-03-13T01:53:16Z

If .next function does not change position index, following .show function will repeat output related to current position index. In case of /sys/kernel/security/tpm0/ascii_bios_measurements and binary_bios_measurements: 1) read after lseek beyound end of file generates whole last line. 2) read after lseek to middle of last line generates expected end of last line and unexpected whole last line once again. Cc: stable@vger.kernel.org # 4.19.x Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: Don't make log failures fatal

2020-03-13T01:53:15Z

If a TPM is in disabled state, it's reasonable for it to have an empty log. Bailing out of probe in this case means that the PPI interface isn't available, so there's no way to then enable the TPM from the OS. In general it seems reasonable to ignore log errors - they shouldn't interfere with any other TPM functionality. Signed-off-by: Matthew Garrett Cc: stable@vger.kernel.org # 4.19.x Reviewed-by: Jerry Snitselaar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: Initialize crypto_id of allocated_banks to HASH_ALGO__LAST

2020-02-17T18:47:06Z

chip->allocated_banks, an array of tpm_bank_info structures, contains the list of TPM algorithm IDs of allocated PCR banks. It also contains the corresponding ID of the crypto subsystem, so that users of the TPM driver can calculate a digest for a PCR extend operation. However, if there is no mapping between TPM algorithm ID and crypto ID, the crypto_id field of tpm_bank_info remains set to zero (the array is allocated and initialized with kcalloc() in tpm2_get_pcr_allocation()). Zero should not be used as value for unknown mappings, as it is a valid crypto ID (HASH_ALGO_MD4). Thus, initialize crypto_id to HASH_ALGO__LAST. Cc: stable@vger.kernel.org # 5.1.x Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read") Signed-off-by: Roberto Sassu Reviewed-by: Petr Vorel Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen