wireguard-linux/drivers/clk/imx, branch jd/unified-crypt-queue

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-04-05T17:43:32Z

Pull clk updates from Stephen Boyd: "There's not much to see in the core framework this time around. Instead the majority of the diff is the normal collection of driver additions for new SoCs and non-critical clk data fixes and updates. The framework must be middle aged. The two biggest directories in the diffstat show that the Qualcomm and Unisoc support added a handful of big drivers for new SoCs but that's not really the whole story because those new drivers tend to add large numbers of lines of clk data. There's a handful of AT91 clk drivers added this time around too and a bunch of improvements to drivers like the i.MX driver. All around lots of updates and fixes in various clk drivers which is good to see. The core framework has only one real major change which has been baking in next for the past couple months. It fixes the framework so that it stops caching a clk's phase when the phase clk_op returns an error. Before this change we would consider some negative errno as a phase and that just doesn't make sense. Core: - Don't show clk phase when it is invalid New Drivers: - Add support for Unisoc SC9863A clks - Qualcomm SM8250 RPMh and MSM8976 RPM clks - Qualcomm SM8250 Global Clock Controller (GCC) support - Qualcomm SC7180 Modem Clock Controller (MSS CC) support - EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs - Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and at91sam9g45 SoCs Updates: - GPU GX GDSC support on Qualcomm sc7180 - Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers - A series from Anson to convert i.MX8 clock bindings to json-schema - Update i.MX pll14xx driver to include new frequency entries for pll1443x table, and return error for invalid PLL type - Add missing of_node_put() call for a number of i.MX clock drivers - Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already have the flag on its child cpu clock - Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL via CORE_SEL slice, and source from A53 CCM clk root when we need to change ARM PLL frequency. Thus, we can support core running above 1GHz safely - Update i.MX pfdv2 driver to check zero rate and use determine_rate for getting the best rate - Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for imx7d - Remove PMC clks from Tegra clk driver - Improved clock/reset handling for the Renesas R-Car USB2 Clock Selector - Conversion to json-schema of the Renesas CPG/MSSR DT bindings - Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3 - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and M3-N - Update Amlogic audio clock gate hierarchy for meson8 and gxbb - Update Amlogic g12a spicc clock sources - Support for Ingenic X1000 TCU clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (146 commits) clk: sprd: fix to get a correct ibias of pll dt-bindings: imx8mm-clock: Fix the file path dt-bindings: imx8mq-clock: Fix the file path clk: qcom: rpmh: Drop unnecessary semicolons clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd() clk: tegra: Use NULL for pointer initialization clk: sprd: add clocks support for SC9863A clk: sprd: support to get regmap from parent node clk: sprd: Add macros for referencing parents without strings clk: sprd: Add dt-bindings include file for SC9863A dt-bindings: clk: sprd: add bindings for sc9863a clock controller dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific clk: sprd: add gate for pll clocks MAINTAINERS: dt: update reference for arm-integrator.txt clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks clk: mmp2: Add clock for fifth SD HCI on MMP3 dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3 clk: mmp2: Add clocks for the thermal sensors dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors clk: mmp2: add the GPU clocks ...

Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-04-03T22:22:05Z

Pull ARM devicetree updates from Arnd Bergmann: "Most of the commits are for additional hardware support and minor fixes for existing machines for all the usual platforms: qcom, amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap, and versatile. The conversion of binding files to machine-readable yaml format continues, along with fixes found during the validation. Andre Przywara takes over maintainership for the old Calxeda Highbank platform and provides a number of updates. The OMAP2+ platforms see a continued move from platform data into dts files, for many devices that relied on a mix of auxiliary data in addition to the DT description A moderate number of new SoCs and machines are added, here is a full list: - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865 (SM8250) is the current high-end phone chip, and IPQ6018 is a new WiFi-6 router chip. - Mediatek MT8516 application processor SoC for voice assistants, along with the "pumpkin" development board - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an evaluation board. - Kontron "sl28" board family based on NXP LS1028A - Eleven variations of the new i.MX6 TechNexion Pico board, combining the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7 SoM carriers - Three additional variants of the Toradex Colibri board family, all based on versions of the NXP i.MX7. - The Pinebook Pro laptop based on Rockchip RK3399 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on the ST-Ericsson u8500 platform - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on STMicroelectronics stm32mp157 - Renesas M3ULCB starter kit for R-Car M3-W+ - Hoperun HiHope development board with Renesas RZ/G2M - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13" * tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits) ARM: dts: ux500: Fix missing node renames arm64: dts: Revert "specify console via command line" MAINTAINERS: Update Calxeda Highbank maintainership arm: dts: calxeda: Group port-phys and sgpio-gpio items arm: dts: calxeda: Fix interrupt grouping arm: dts: calxeda: Provide UART clock arm: dts: calxeda: Basic DT file fixes arm64: dts: specify console via command line ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node ARM: dts: gemini: Add thermal zone to DIR-685 ARM: dts: gemini: Rename IDE nodes ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0 arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node ...

clk: imx: Align imx sc clock parent msg structs to 4

2020-03-26T01:46:05Z

The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: 666aed2d13ee ("clk: imx: scu: add set parent support") Signed-off-by: Leonard Crestez Link: https://lkml.kernel.org/r/aad021e432b3062c142973d09b766656eec18fde.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd

clk: imx: Align imx sc clock msg structs to 4

2020-03-26T01:45:59Z

The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: fe37b4820417 ("clk: imx: add scu clock common part") Signed-off-by: Leonard Crestez Link: https://lkml.kernel.org/r/10e97a04980d933b2cfecb6b124bf9046b6e4f16.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd

clk: imx: clk-gate2: Pass the device to the register function

2020-03-16T01:38:30Z

The device needs to be passed on to the clk_hw_register. Fixes: 1f9aec9662566189 ("clk: imx: clk-gate2: Switch to clk_hw based API") Signed-off-by: Abel Vesa Reviewed-by: Stephen Boyd Signed-off-by: Shawn Guo

clk: imx7d: Add PXP clock

2020-03-16T00:56:59Z

The PXP has a single CCGR clock gate, gating both the IPG_CLK_ROOT and the MAIN_AXI_CLK_ROOT. Add a single clock to cover both. Signed-off-by: Laurent Pinchart Signed-off-by: Shawn Guo

clk: imx8mp: Correct the enet_qos parent clock

2020-03-16T00:18:20Z

enet_qos is for eqos tsn AXI bus clock whose clock source is from ccm_enet_axi_clk_root, and controlled by CCM_CCGR59(offset 0x43b0) and CCM_CCGR64(offset 0x4400), so correct enet_qos root clock's parent clock to sim_enet. Fixes: 9c140d992676 ("clk: imx: Add support for i.MX8MP clock driver") Signed-off-by: Fugang Duan Signed-off-by: Anson Huang Signed-off-by: Shawn Guo

clk: imx8mp: Correct IMX8MP_CLK_HDMI_AXI clock parent

2020-03-16T00:18:20Z

IMX8MP_CLK_HDMI_AXI should be from imx8mp_media_axi_sels instead of imx8mp_media_apb_sels, fix it. Fixes: 9c140d992676 ("clk: imx: Add support for i.MX8MP clock driver") Signed-off-by: Anson Huang Signed-off-by: Shawn Guo

clk: imx8mq: A53 core clock no need to be critical

2020-03-11T07:12:02Z

'A53_CORE' is just a mux and no need to be critical, being critical will cause its parent clock always ON which does NOT make sense, to make sure CPU's hardware clock source NOT being disabled during clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent operations to after critical clock 'ARM_CLK' setup finished. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo

clk: imx8mp: A53 core clock no need to be critical

2020-03-11T07:11:59Z