wireguard-linux/drivers/clk/tegra, branch jd/unified-crypt-queue

clk: tegra: Use NULL for pointer initialization

2020-03-25T02:14:12Z

This silences a sparse warning about using a plain integer instead of NULL for a pointer. Signed-off-by: Stephen Boyd

clk: tegra: Remove audio clocks configuration from clock driver

2020-03-12T11:10:49Z

Current clock driver enables PLLA, cdev1 on Tegra20 and extern1 on Tegra30 and above as a part of clocks init and there is no need to have these audio clocks enabled by the clock driver. extern1 is used as parent for clk_out_1 and clk_out_1 is dedicated for audio mclk on Tegra30 and above Tegra platforms and these clocks are taken care by ASoC driver. So, this patch removes audio related clocks configuration from clock init of Tegra20 and above. Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding

clk: tegra: Remove tegra_pmc_clk_init along with clk ids

2020-03-12T10:34:04Z

Current Tegra clock driver registers PMC clocks clk_out_1, clk_out_2, clk_out_3 and 32KHz blink output in tegra_pmc_init() which does direct PMC register access during clk_ops and these PMC register read and write access will not happen when PMC is in secure mode. Any direct PMC register access from non-secure world will not go through. All the PMC clocks are moved to Tegra PMC driver with PMC as a clock provider. This patch removes tegra_pmc_clk_init along with corresponding clk ids from Tegra clock driver. Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding

clk: tegra: Remove CLK_M_DIV fixed clocks

2020-03-12T10:33:32Z

Tegra has no CLK_M_DIV2 and CLK_M_DIV4 clocks and instead it has OSC_DIV2 and OSC_DIV4 clocks from OSC pads which are the possible parents of PMC clocks for Tegra30 through Tegra210. Tegra PMC clock parents are changed to use OSC_DIV clocks. So, this patch removes CLK_M_DIV fixed clocks Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding

clk: tegra: Fix Tegra PMC clock out parents

2020-03-12T10:33:30Z

Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents are osc, osc_div2, osc_div4 and extern clock. Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4 for PMC clocks. This patch fixes this. Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding

clk: tegra: Add Tegra OSC to clock lookup

2020-03-12T10:33:29Z

OSC is one of the parent for Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3. This patch adds Tegra OSC to clock lookup. Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding

clk: tegra: Add support for OSC_DIV fixed clocks

2020-03-12T10:33:27Z

Tegra30 through Tegra210 has OSC_DIV2 and OSC_DIV4 fixed clocks from the OSC pads. This patch adds support for these clocks. Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding

Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', 'clk-freescale' and 'clk-qoriq' into clk-next

2020-01-31T21:14:26Z

- Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings

clk: tegra20/30: Explicitly set parent clock for Video Decoder

2020-01-10T14:50:43Z

The VDE parent won't be changed automatically to PLLC if bootloader didn't do that for us, hence let's explicitly set the parent for consistency. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra20/30: Don't pre-initialize displays parent clock

2020-01-10T14:50:25Z

Both Tegra20 and Tegra30 are initializing display's parent clock incorrectly because PLLP is running at 216/408MHz while display rate is set to 600MHz, but pre-setting the parent isn't needed at all because display driver selects proper parent anyways. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding