wireguard-linux/drivers/crypto/chelsio, branch jd/unified-crypt-queue

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-04-07T19:03:32Z

Pull networking fixes from David Miller: 1) Slave bond and team devices should not be assigned ipv6 link local addresses, from Jarod Wilson. 2) Fix clock sink config on some at803x PHY devices, from Oleksij Rempel. 3) Uninitialized stack space transmitted in slcan frames, fix from Richard Palethorpe. 4) Guard HW VLAN ops properly in stmmac driver, from Jose Abreu. 5) "=" --> "|=" fix in aquantia driver, from Colin Ian King. 6) Fix TCP fallback in mptcp, from Florian Westphal. (accessing a plain tcp_sk as if it were an mptcp socket). 7) Fix cavium driver in some configurations wrt. PTP, from Yue Haibing. 8) Make ipv6 and ipv4 consistent in the lower bound allowed for neighbour entry retrans_time, from Hangbin Liu. 9) Don't use private workqueue in pegasus usb driver, from Petko Manolov. 10) Fix integer overflow in mlxsw, from Colin Ian King. 11) Missing refcnt init in cls_tcindex, from Cong Wang. 12) One too many loop iterations when processing cmpri entries in ipv6 rpl code, from Alexander Aring. 13) Disable SG and TSO by default in r8169, from Heiner Kallweit. 14) NULL deref in macsec, from Davide Caratti. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits) macsec: fix NULL dereference in macsec_upd_offload() skbuff.h: Improve the checksum related comments net: dsa: bcm_sf2: Ensure correct sub-node is parsed qed: remove redundant assignment to variable 'rc' wimax: remove some redundant assignments to variable result mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLE mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_PRIORITY r8169: change back SG and TSO to be disabled by default net: dsa: bcm_sf2: Do not register slave MDIO bus with OF ipv6: rpl: fix loop iteration tun: Don't put_page() for all negative return values from XDP program net: dsa: mt7530: fix null pointer dereferencing in port5 setup mptcp: add some missing pr_fmt defines net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers net_sched: fix a missing refcnt in tcindex_init() net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting mlxsw: spectrum_trap: fix unintention integer overflow on left shift pegasus: Remove pegasus' own workqueue neigh: support smaller retrans_time settting net: openvswitch: use hlist_for_each_entry_rcu instead of hlist_for_each_entry ...

crypto/chcr: Add missing include file

2020-04-02T13:55:06Z

drivers/crypto/chelsio/chcr_ktls.c: In function ‘chcr_short_record_handler’: drivers/crypto/chelsio/chcr_ktls.c:1770:12: error: implicit declaration of function ‘kmap_atomic’; did you mean ‘in_atomic’? [-Werror=implicit-function-declaration] vaddr = kmap_atomic(skb_frag_page(f)); ^~~~~~~~~~~ Reported-by: Hulk Robot Fixes: dc05f3df8fac ("chcr: Handle first or middle part of record") Signed-off-by: YueHaibing Signed-off-by: David S. Miller

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2020-04-01T21:47:40Z

Pull crypto updates from Herbert Xu: "API: - Fix out-of-sync IVs in self-test for IPsec AEAD algorithms Algorithms: - Use formally verified implementation of x86/curve25519 Drivers: - Enhance hwrng support in caam - Use crypto_engine for skcipher/aead/rsa/hash in caam - Add Xilinx AES driver - Add uacce driver - Register zip engine to uacce in hisilicon - Add support for OCTEON TX CPT engine in marvell" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) crypto: af_alg - bool type cosmetics crypto: arm[64]/poly1305 - add artifact to .gitignore files crypto: caam - limit single JD RNG output to maximum of 16 bytes crypto: caam - enable prediction resistance in HRWNG bus: fsl-mc: add api to retrieve mc version crypto: caam - invalidate entropy register during RNG initialization crypto: caam - check if RNG job failed crypto: caam - simplify RNG implementation crypto: caam - drop global context pointer and init_done crypto: caam - use struct hwrng's .init for initialization crypto: caam - allocate RNG instantiation descriptor with GFP_DMA crypto: ccree - remove duplicated include from cc_aead.c crypto: chelsio - remove set but not used variable 'adap' crypto: marvell - enable OcteonTX cpt options for build crypto: marvell - add the Virtual Function driver for CPT crypto: marvell - add support for OCTEON TX CPT engine crypto: marvell - create common Kconfig and Makefile for Marvell crypto: arm/neon - memzero_explicit aes-cbc key crypto: bcm - Use scnprintf() for avoiding potential buffer overflow crypto: atmel-i2c - Fix wakeup fail ...

crypto/chtls: Fix chtls crash in connection cleanup

2020-03-30T17:44:08Z

There is a possibility that cdev is removed before CPL_ABORT_REQ_RSS is fully processed, so it's better to save it in skb. Added checks in handling the flow correctly, which suggests connection reset request is sent to HW, wait for HW to respond. Signed-off-by: Rohit Maheshwari Signed-off-by: David S. Miller

crypto/chcr: fix incorrect ipv6 packet length

2020-03-30T17:40:12Z

IPv6 header's payload length field shouldn't include IPv6 header length. Signed-off-by: Rohit Maheshwari Signed-off-by: David S. Miller

Crypto: chelsio - Fixes a deadlock between rtnl_lock and uld_mutex

2020-03-30T17:33:23Z

The locks are taken in this order during driver registration (uld_mutex), at: cxgb4_register_uld.part.14+0x49/0xd60 [cxgb4] (rtnl_mutex), at: rtnetlink_rcv_msg+0x2db/0x400 (uld_mutex), at: cxgb_up+0x3a/0x7b0 [cxgb4] (rtnl_mutex), at: chcr_add_xfrmops+0x83/0xa0 [chcr](stucked here) To avoid this now the netdev features are updated after the cxgb4_register_uld function is completed. Fixes: 6dad4e8ab3ec6 ("chcr: Add support for Inline IPSec"). Signed-off-by: Ayush Sawal Signed-off-by: David S. Miller

Crypto: chelsio - Fixes a hang issue during driver registration

2020-03-30T17:33:23Z

This issue occurs only when multiadapters are present. Hang happens because assign_chcr_device returns u_ctx pointer of adapter which is not yet initialized as for this adapter cxgb_up is not been called yet. The last_dev pointer is used to determine u_ctx pointer and it is initialized two times in chcr_uld_add in chcr_dev_add respectively. The fix here is don't initialize the last_dev pointer during chcr_uld_add. Only assign to value to it when the adapter's initialization is completed i.e in chcr_dev_add. Fixes: fef4912b66d62 ("crypto: chelsio - Handle PCI shutdown event"). Signed-off-by: Ayush Sawal Signed-off-by: David S. Miller

Crypto/chtls: add/delete TLS header in driver

2020-03-23T20:04:48Z

Kernel TLS forms TLS header in kernel during encryption and removes while decryption before giving packet back to user application. The similar logic is introduced in chtls code as well. v1->v2: - tls_proccess_cmsg() uses tls_handle_open_record() which is not required in TOE-TLS. Don't mix TOE with other TLS types. Signed-off-by: Vinay Kumar Yadav Signed-off-by: Rohit Maheshwari Acked-by: Jakub Kicinski Signed-off-by: David S. Miller

crypto: chelsio - remove set but not used variable 'adap'

2020-03-20T03:36:52Z

drivers/crypto/chelsio/chcr_algo.c: In function 'chcr_device_init': drivers/crypto/chelsio/chcr_algo.c:1440:18: warning: variable 'adap' set but not used [-Wunused-but-set-variable] commit 567be3a5d227 ("crypto: chelsio - Use multiple txq/rxq per tfm to process the requests") involved this unused variable. Signed-off-by: YueHaibing Signed-off-by: Herbert Xu

chcr: remove set but not used variable 'status'

2020-03-16T09:02:04Z

drivers/crypto/chelsio/chcr_ktls.c: In function chcr_ktls_cpl_set_tcb_rpl: drivers/crypto/chelsio/chcr_ktls.c:662:11: warning: variable status set but not used [-Wunused-but-set-variable] commit 8a30923e1598 ("cxgb4/chcr: Save tx keys and handle HW response") involved this unused variable, remove it. Reported-by: Hulk Robot Signed-off-by: YueHaibing Signed-off-by: David S. Miller