wireguard-linux/drivers/firmware/arm_scmi/Makefile, branch jd/unified-crypt-queue

firmware: arm_scmi: Make scmi core independent of the transport type

2020-02-10T11:50:51Z

The SCMI specification is fairly independent of the transport protocol, which can be a simple mailbox (already implemented) or anything else. The current Linux implementation however is very much dependent on the mailbox transport layer. This patch makes the SCMI core code (driver.c) independent of the mailbox transport layer and moves all mailbox related code to a new file: mailbox.c and all struct shared_mem related code to a new file: shmem.c. We can now implement more transport protocols to transport SCMI messages. The transport protocols just need to provide struct scmi_transport_ops, with its version of the callbacks to enable exchange of SCMI messages. Signed-off-by: Viresh Kumar Link: https://lore.kernel.org/r/8698a3cec199b8feab35c2339f02dc232bfd773b.1580448239.git.viresh.kumar@linaro.org Signed-off-by: Sudeep Holla

firmware: arm_scmi: Add RESET protocol in SCMI v2.0

2019-08-12T11:23:02Z

SCMIv2.0 adds a new Reset Management Protocol to manage various reset states a given device or domain can enter. Device(s) that can be collectively reset through a common reset signal constitute a reset domain for the firmware. A reset domain can be reset autonomously or explicitly through assertion and de-assertion of the signal. When autonomous reset is chosen, the firmware is responsible for taking the necessary steps to reset the domain and to subsequently bring it out of reset. When explicit reset is chosen, the caller has to specifically assert and then de-assert the reset signal by issuing two separate RESET commands. Add the basic SCMI reset infrastructure that can be used by Linux reset controller driver. Reviewed-by: Peng Fan Reviewed-by: Philipp Zabel Signed-off-by: Sudeep Holla

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

firmware: arm_scmi: add device power domain support using genpd

2018-02-28T16:37:57Z

This patch hooks up the support for device power domain provided by SCMI using the Linux generic power domain infrastructure. Cc: Kevin Hilman Reviewed-by: Ulf Hansson Signed-off-by: Sudeep Holla

firmware: arm_scmi: add initial support for sensor protocol

2018-02-28T16:37:57Z

The sensor protocol provides functions to manage platform sensors, and provides the commands to describe the protocol version and the various attribute flags. It also provides commands to discover various sensors implemented and managed by the platform, read any sensor synchronously or asynchronously as allowed by the platform, program sensor attributes and/or configurations, if applicable. This patch adds support for most of the above features. Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla

firmware: arm_scmi: add initial support for power protocol

2018-02-28T16:37:57Z

The power protocol is intended for management of power states of various power domains. The power domain management protocol provides commands to describe the protocol version, discover the implementation specific attributes, set and get the power state of a domain. This patch adds support for the above mention features of the protocol. Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla -- drivers/firmware/arm_scmi/Makefile | 2 +- drivers/firmware/arm_scmi/power.c | 242 +++++++++++++++++++++++++++++++++++++ include/linux/scmi_protocol.h | 28 +++++ 3 files changed, 271 insertions(+), 1 deletion(-) create mode 100644 drivers/firmware/arm_scmi/power.c

firmware: arm_scmi: add initial support for clock protocol

2018-02-28T16:37:57Z

The clock protocol is intended for management of clocks. It is used to enable or disable clocks, and to set and get the clock rates. This protocol provides commands to describe the protocol version, discover various implementation specific attributes, describe a clock, enable and disable a clock and get/set the rate of the clock synchronously or asynchronously. This patch adds initial support for the clock protocol. Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla

firmware: arm_scmi: add initial support for performance protocol

2018-02-28T16:37:57Z

The performance protocol is intended for the performance management of group(s) of device(s) that run in the same performance domain. It includes even the CPUs. A performance domain is defined by a set of devices that always have to run at the same performance level. For example, a set of CPUs that share a voltage domain, and have a common frequency control, is said to be in the same performance domain. The commands in this protocol provide functionality to describe the protocol version, describe various attribute flags, set and get the performance level of a domain. It also supports discovery of the list of performance levels supported by a performance domain, and the properties of each performance level. This patch adds basic support for the performance protocol. Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla

firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices

2018-02-28T16:37:57Z

The SCMI specification encompasses various protocols. However, not every protocol has to be present on a given platform/implementation as not every protocol is relevant for it. Furthermore, the platform chooses which protocols it exposes to a given agent. The only protocol that must be implemented is the base protocol. The base protocol is used by an agent to discover which protocols are available to it. In order to enumerate the discovered implemented protocols, this patch adds support for a separate scmi protocol bus. It also adds mechanism to register support for different protocols. Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla

firmware: arm_scmi: add common infrastructure and support for base protocol

2018-02-28T16:37:57Z

The base protocol describes the properties of the implementation and provide generic error management. The base protocol provides commands to describe protocol version, discover implementation specific attributes and vendor/sub-vendor identification, list of protocols implemented and the various agents are in the system including OSPM and the platform. It also supports registering for notifications of platform errors. This protocol is mandatory. This patch adds support for the same along with some basic infrastructure to add support for other protocols. Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla