wireguard-linux/drivers/firmware, branch stable

Merge tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

2025-10-23T20:30:01Z

Arm SCMI fixes for v6.18 This series contains a set of small, focused fixes that address robustness and lifecycle issues in the Arm SCMI core and debug support, ensuring safer handling of debug initialization failures, correct flag management in raw mode, and consistent inflight counter tracking. Brief summary: - Fix raw xfer flag clearing - Skip RAW debug initialization on failure - Make inflight counter helpers null-safe, preventing crashes if debug initialization fails - Account for failed debug initialization globally There is no functional change for standard SCMI operation, but these fixes improve stability in debug and raw modes, particularly in error paths. * tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode firmware: arm_scmi: Skip RAW initialization on failure include: trace: Fix inflight count helper on failed initialization firmware: arm_scmi: Account for failed debug initialization Signed-off-by: Arnd Bergmann

firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode

2025-10-15T14:28:49Z

The SCMI_XFER_FLAG_IS_RAW flag was being cleared prematurely in scmi_xfer_raw_put() before the transfer completion was properly acknowledged by the raw message handlers. Move the clearing of SCMI_XFER_FLAG_IS_RAW and SCMI_XFER_FLAG_CHAN_SET from scmi_xfer_raw_put() to __scmi_xfer_put() to ensure the flags remain set throughout the entire raw message processing pipeline until the transfer is returned to the free pool. Fixes: 3095a3e25d8f ("firmware: arm_scmi: Add xfer helpers to provide raw access") Suggested-by: Cristian Marussi Signed-off-by: Artem Shimko Reviewed-by: Cristian Marussi Message-Id: <20251008091057.1969260-1-a.shimko.dev@gmail.com> Signed-off-by: Sudeep Holla

firmware: arm_scmi: Skip RAW initialization on failure

2025-10-15T14:28:01Z

Avoid attempting to initialize RAW mode when the debug subsystem itself has failed to initialize, since doing so is pointless and emits misleading error messages. Signed-off-by: Cristian Marussi Message-Id: <20251014115346.2391418-3-cristian.marussi@arm.com> Signed-off-by: Sudeep Holla

include: trace: Fix inflight count helper on failed initialization

2025-10-15T14:26:41Z

Add a check to the scmi_inflight_count() helper to handle the case when the SCMI debug subsystem fails to initialize. Fixes: f8e656382b4a ("include: trace: Add tracepoint support for inflight xfer count") Signed-off-by: Cristian Marussi Message-Id: <20251014115346.2391418-2-cristian.marussi@arm.com> Signed-off-by: Sudeep Holla

firmware: arm_scmi: Account for failed debug initialization

2025-10-15T14:24:29Z

When the SCMI debug subsystem fails to initialize, the related debug root will be missing, and the underlying descriptor will be NULL. Handle this fault condition in the SCMI debug helpers that maintain metrics counters. Fixes: 0b3d48c4726e ("firmware: arm_scmi: Track basic SCMI communication debug metrics") Signed-off-by: Cristian Marussi Message-Id: <20251014115346.2391418-1-cristian.marussi@arm.com> Signed-off-by: Sudeep Holla

firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor

2025-10-13T09:34:46Z

FF-A v1.2 introduced 16 byte IMPLEMENTATION DEFINED value in the endpoint memory access descriptor to allow any sender could to specify an its any custom value for each receiver. Also this value must be specified by the receiver when retrieving the memory region. The sender must ensure it informs the receiver of this value via an IMPLEMENTATION DEFINED mechanism such as a partition message. So the FF-A driver can use the message interfaces to communicate the value and set the same in the ffa_mem_region_attributes structures when using the memory interfaces. The driver ensure that the size of the endpoint memory access descriptors is set correctly based on the FF-A version. Fixes: 9fac08d9d985 ("firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver") Reported-by: Lixiang Mao Tested-by: Lixiang Mao Message-Id: <20250923150927.1218364-1-sudeep.holla@arm.com> Signed-off-by: Sudeep Holla

Merge tag 'efi-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi

2025-10-05T19:08:14Z

Pull EFI updates from Ard Biesheuvel: - Document what OVMF stands for (Open Virtual Machine Firmware) - Clear NX restrictions also from 'more reliable' type memory when using the DXE service API * tag 'efi-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/x86: Memory protection on EfiGcdMemoryTypeMoreReliable efi: Explain OVMF acronym in OVMF_DEBUG_LOG help text

Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-10-03T01:44:54Z

Pull non-MM updates from Andrew Morton: - "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet completes the removal of this legacy IDR API - "panic: introduce panic status function family" from Jinchao Wang provides a number of cleanups to the panic code and its various helpers, which were rather ad-hoc and scattered all over the place - "tools/delaytop: implement real-time keyboard interaction support" from Fan Yu adds a few nice user-facing usability changes to the delaytop monitoring tool - "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos Petrongonas fixes a panic which was happening with the combination of EFI and KHO - "Squashfs: performance improvement and a sanity check" from Phillip Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen microbenchmark - plus another 50-odd singleton patches all over the place * tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits) Squashfs: reject negative file sizes in squashfs_read_inode() kallsyms: use kmalloc_array() instead of kmalloc() MAINTAINERS: update Sibi Sankar's email address Squashfs: add SEEK_DATA/SEEK_HOLE support Squashfs: add additional inode sanity checking lib/genalloc: fix device leak in of_gen_pool_get() panic: remove CONFIG_PANIC_ON_OOPS_VALUE ocfs2: fix double free in user_cluster_connect() checkpatch: suppress strscpy warnings for userspace tools cramfs: fix incorrect physical page address calculation kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit Squashfs: fix uninit-value in squashfs_get_parent kho: only fill kimage if KHO is finalized ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name() kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock coccinelle: platform_no_drv_owner: handle also built-in drivers coccinelle: of_table: handle SPI device ID tables lib/decompress: use designated initializers for struct compress_format efi: support booting with kexec handover (KHO) ...

Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-10-02T00:32:51Z

Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ...

Merge tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2025-09-30T20:40:35Z

Pull x86 SEV and apic updates from Borislav Petkov: - Add functionality to provide runtime firmware updates for the non-x86 parts of an AMD platform like the security processor (ASP) firmware, modules etc, for example. The intent being that these updates are interim, live fixups before a proper BIOS update can be attempted - Add guest support for AMD's Secure AVIC feature which gives encrypted guests the needed protection against a malicious hypervisor generating unexpected interrupts and injecting them into such guest, thus interfering with its operation in an unexpected and negative manner. The advantage of this scheme is that the guest determines which interrupts and when to accept them vs leaving that to the benevolence (or not) of the hypervisor - Strictly separate the startup code from the rest of the kernel where former is executed from the initial 1:1 mapping of memory. The problem was that the toolchain-generated version of the code was being executed from a different mapping of memory than what was "assumed" during code generation, needing an ever-growing pile of fixups for absolute memory references which are invalid in the early, 1:1 memory mapping during boot. The major advantage of this is that there's no need to check the 1:1 mapping portion of the code for absolute relocations anymore and get rid of the RIP_REL_REF() macro sprinkling all over the place. For more info, see Ard's very detailed writeup on this [1] - The usual cleanups and fixes Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1] * tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits) x86/boot: Drop erroneous __init annotation from early_set_pages_state() crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver crypto: ccp - Add new HV-Fixed page allocation/free API x86/sev: Add new dump_rmp parameter to snp_leak_pages() API x86/startup/sev: Document the CPUID flow in the boot #VC handler objtool: Ignore __pi___cfi_ prefixed symbols x86/sev: Zap snp_abort() x86/apic/savic: Do not use snp_abort() x86/boot: Get rid of the .head.text section x86/boot: Move startup code out of __head section efistub/x86: Remap inittext read-execute when needed x86/boot: Create a confined code area for startup code x86/kbuild: Incorporate boot/startup/ via Kbuild makefile x86/boot: Revert "Reject absolute references in .head.text" x86/boot: Check startup code for absence of absolute relocations objtool: Add action to check for absence of absolute relocations x86/sev: Export startup routines for later use x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object x86/sev: Provide PIC aliases for SEV related data objects x86/boot: Provide PIC aliases for 5-level paging related constants ...