wireguard-linux/drivers/i2c/busses/Kconfig, branch jd/unified-crypt-queue

i2c: exynos: Update Kconfig documentation

2020-01-23T11:15:18Z

Update the help text to reflect current support devices: 1. The Exynos high speed I2C driver supports Exynos5 (ARMv7), Exynos5433 and Exynos7 (both ARMv8) SoCs, 2. The S3C I2C driver supports S3C, S5Pv210 and Exynos{3,4,5} SoCs. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang

i2c: Enable compile testing for more drivers

2020-01-23T11:15:11Z

Some of the I2C bus drivers can be compile tested to increase build coverage. This requires also: 1. Adding dependencies on COMMON_CLK for BCM2835 and Meson I2C controllers, 2. Adding 'if' conditional to 'default y' so they will not get enabled by default on all other architectures, 3. Limiting few compile test options to supported architectures (which provide the readsX()/writesX() primitives). Signed-off-by: Krzysztof Kozlowski [wsa: revert chunk for ZX2967. it needs more preparation] Signed-off-by: Wolfram Sang

i2c: parport: simplify Kconfig description

2020-01-15T17:18:41Z

The driver is not 'new' anymore, so remove details from the driver it surpassed. Signed-off-by: Wolfram Sang Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang

i2c: parport-light: remove driver

2020-01-15T17:18:34Z

The justification of a light version of the parport driver was less overhead for embedded systems. Well, today, even if an embedded system still has a parport, it surely can handle the fully-fledged parport driver. Remove it to reduce the maintenance burden. Signed-off-by: Wolfram Sang Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang

i2c: Fix Kconfig indentation

2019-11-25T16:13:51Z

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Acked-by: Peter Rosin Signed-off-by: Wolfram Sang

i2c: i801: Correct Intel Jasper Lake SOC naming

2019-11-25T14:52:35Z

There is no suffix applied to Intel Jasper Lake SOC. Remove it from the comments and definitions. Besides that, it's a SOC, thus replace PCH with SOC where it appropriate. Fixes: e0c61c04791a ("i2c: i801: Add support for Intel Jasper Lake") Cc: Jarkko Nikula Signed-off-by: Andy Shevchenko Reviewed-by: Jarkko Nikula Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang

i2c: pxa: migrate to new i2c_slave APIs

2019-11-11T20:38:09Z

The i2c subsystem was enhanced circa 2015 to support operating as an i2c-slave device. Prior to that, the i2c-pxa driver supported an i2c-slave but had its own APIs. There are no existing in-kernel drivers or platforms that utilize the i2c-pxa APIs. Migrate the i2c-pxa driver to the general i2c-slave APIs so that existing drivers, such as the i2c-slave-eeprom, can be used. This has been tested with a Marvell EspressoBin, using i2c-pxa and i2c-slave-eeprom, acting as a slave, and a RaspeberryPi 3, using the at24 driver, acting as a master. Signed-off-by: Patrick Williams Signed-off-by: Wolfram Sang

i2c: i801: Add support for Intel Jasper Lake

2019-10-24T18:31:23Z

Add support for SMBus controller on Intel Jasper Lake PCH-N. Signed-off-by: Jarkko Nikula Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang

Merge branch 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2019-09-24T23:48:02Z

Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...

Merge tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

2019-09-19T21:14:28Z

Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver