wireguard-linux/drivers/infiniband/ulp/ipoib, branch jd/orphan-parallel

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2020-10-17T18:18:18Z

Pull rdma updates from Jason Gunthorpe: "A usual cycle for RDMA with a typical mix of driver and core subsystem updates: - Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma, hns, usnic, qib, qedr, cxgb4, hns, bnxt_re - Various rtrs fixes and updates - Bug fix for mlx4 CM emulation for virtualization scenarios where MRA wasn't working right - Use tracepoints instead of pr_debug in the CM code - Scrub the locking in ucma and cma to close more syzkaller bugs - Use tasklet_setup in the subsystem - Revert the idea that 'destroy' operations are not allowed to fail at the driver level. This proved unworkable from a HW perspective. - Revise how the umem API works so drivers make fewer mistakes using it - XRC support for qedr - Convert uverbs objects RWQ and MW to new the allocation scheme - Large queue entry sizes for hns - Use hmm_range_fault() for mlx5 On Demand Paging - uverbs APIs to inspect the GID table instead of sysfs - Move some of the RDMA code for building large page SGLs into lib/scatterlist" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits) RDMA/ucma: Fix use after free in destroy id flow RDMA/rxe: Handle skb_clone() failure in rxe_recv.c RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI RDMA: Explicitly pass in the dma_device to ib_register_device lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values IB/mlx4: Convert rej_tmout radix-tree to XArray RDMA/rxe: Fix bug rejecting all multicast packets RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt() RDMA/rxe: Remove duplicate entries in struct rxe_mr IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS IB/rdmavt: Fix sizeof mismatch MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl. RDMA/bnxt_re: Use rdma_umem_for_each_dma_block() RDMA/umem: Move to allocate SG table from pages lib/scatterlist: Add support in dynamic allocation of SG table from pages tools/testing/scatterlist: Show errors in human readable form tools/testing/scatterlist: Rejuvenate bit-rotten test RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces RDMA/uverbs: Expose the new GID query API to user space ...

RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces

2020-10-05T18:05:45Z

Report the "ipoib pkey", "mode" and "umcast" netlink attributes for every IPoiB interface type, not just children created with 'ip link add'. After setting the rtnl_link_ops for the parent interface, implement the dellink() callback to block users from trying to remove it. Fixes: 862096a8bbf8 ("IB/ipoib: Add more rtnl_link_ops callbacks") Link: https://lore.kernel.org/r/20201004132948.26669-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib Signed-off-by: Jason Gunthorpe

net: core: introduce struct netdev_nested_priv for nested interface infrastructure

2020-09-28T22:00:15Z

Functions related to nested interface infrastructure such as netdev_walk_all_{ upper | lower }_dev() pass both private functions and "data" pointer to handle their own things. At this point, the data pointer type is void *. In order to make it easier to expand common variables and functions, this new netdev_nested_priv structure is added. In the following patch, a new member variable will be added into this struct to fix the lockdep issue. Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

RDMA/ipoib: Convert to use DEFINE_SEQ_ATTRIBUTE macro

2020-09-16T16:46:18Z

Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Link: https://lore.kernel.org/r/20200916025022.3992627-1-liushixin2@huawei.com Signed-off-by: Liu Shixin Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe

RDMA: Restore ability to fail on SRQ destroy

2020-09-09T17:14:24Z

In similar way to other IB objects, restore the ability to return error on SRQ destroy. Strictly speaking, this change is not necessary, and provided here to ensure a symmetrical interface like other destroy functions. Fixes: 68e326dea1db ("RDMA: Handle SRQ allocations by IB/core") Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

Merge branch 'mlx5_ipoib_qpn' into rdma.git for-next

2020-07-06T17:29:58Z

Michael Guralnik says: ==================== This series handles IPoIB child interface creation with setting interface's HW address. In current implementation, lladdr requested by user is ignored and overwritten. Child interface gets the same GID as the parent interface and a QP number which is assigned by the underlying drivers. In this series we fix this behavior so that user's requested address is assigned to the newly created interface. As specific QP number request is not supported for all vendors, QP number requested by user will still be overwritten when this is not supported. Behavior of creation of child interfaces through the sysfs mechanism or without specifying a requested address, stays the same. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux due to dependencies. * branch 'mlx5_ipoib_qpn': RDMA/ipoib: Handle user-supplied address when creating child net/mlx5: Enable QP number request when creating IPoIB underlay QP Signed-off-by: Jason Gunthorpe

RDMA/ipoib: Handle user-supplied address when creating child

2020-07-06T15:57:58Z

Use the address supplied by user when creating a child interface. Previously, the address requested by the user was ignored and overridden with parent's GID and the random QP number assigned to the child. Link: https://lore.kernel.org/r/20200623110105.1225750-3-leon@kernel.org Signed-off-by: Michael Guralnik Reviewed-by: Feras Daoud Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

RDMA/ipoib: Fix ABBA deadlock with ipoib_reap_ah()

2020-07-02T13:46:06Z

ipoib_mcast_carrier_on_task() insanely open codes a rtnl_lock() such that the only time flush_workqueue() can be called is if it also clears IPOIB_FLAG_OPER_UP. Thus the flush inside ipoib_flush_ah() will deadlock if it gets unlucky enough, and lockdep doesn't help us to find it early: CPU0 CPU1 CPU2 __ipoib_ib_dev_flush() down_read(vlan_rwsem) ipoib_vlan_add() rtnl_trylock() down_write(vlan_rwsem) ipoib_mcast_carrier_on_task() while (!rtnl_trylock()) msleep(20); ipoib_flush_ah() flush_workqueue(priv->wq) Clean up the ah_reaper related functions and lifecycle to make sense: - Start/Stop of the reaper should only be done in open/stop NDOs, not in any other places - cancel and flush of the reaper should only happen in the stop NDO. cancel is only functional when combined with IPOIB_STOP_REAPER. - Non-stop places were flushing the AH's just need to flush out dead AH's synchronously and ignore the background task completely. It is fully locked and harmless to leave running. Which ultimately fixes the ABBA deadlock by removing the unnecessary flush_workqueue() from the problematic place under the vlan_rwsem. Fixes: efc82eeeae4e ("IB/ipoib: No longer use flush as a parameter") Link: https://lore.kernel.org/r/20200625174219.290842-1-kamalheib1@gmail.com Reported-by: Kamal Heib Tested-by: Kamal Heib Signed-off-by: Jason Gunthorpe

RDMA/ipoib: Return void from ipoib_ib_dev_stop()

2020-06-24T11:52:31Z

The return value from ipoib_ib_dev_stop() is always 0 - change it to be void. Link: https://lore.kernel.org/r/20200623105236.18683-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib Signed-off-by: Jason Gunthorpe