wireguard-linux/drivers/iommu/amd/init.c, branch jd/orphan-parallel

Merge branches 'arm/allwinner', 'arm/mediatek', 'arm/renesas', 'arm/tegra', 'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/amd', 'x86/vt-d' and 'core' into next

2020-10-07T09:51:59Z

iommu/amd: Fix the overwritten field in IVMD header

2020-10-01T12:11:36Z

Commit 387caf0b759a ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions") accidentally overwrites the 'flags' field in IVMD (struct ivmd_header) when the I/O virtualization memory definition is associated with the exclusion range entry. This leads to the corrupted IVMD table (incorrect checksum). The kdump kernel reports the invalid checksum: ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (20200717/tbprint-177) AMD-Vi: [Firmware Bug]: IVRS invalid checksum Fix the above-mentioned issue by modifying the 'struct unity_map_entry' member instead of the IVMD header. Cleanup: The *exclusion_range* functions are not used anymore, so get rid of them. Fixes: 387caf0b759a ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions") Reported-and-tested-by: Baoquan He Signed-off-by: Adrian Huang Cc: Jerry Snitselaar Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.com Signed-off-by: Joerg Roedel

iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB

2020-09-24T10:46:54Z

When the IOMMU SNP support bit is set in the IOMMU Extended Features register, hardware re-purposes the following registers: 1. IOMMU Exclusion Base register (MMIO offset 0020h) to Completion Wait Write-Back (CWWB) Base register 2. IOMMU Exclusion Range Limit (MMIO offset 0028h) to Completion Wait Write-Back (CWWB) Range Limit register and requires the IOMMU CWWB semaphore base and range to be programmed in the register offset 0020h and 0028h accordingly. Signed-off-by: Suravee Suthikulpanit Cc: Brijesh Singh Link: https://lore.kernel.org/r/20200923121347.25365-4-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel

iommu/amd: Use 4K page for completion wait write-back semaphore

2020-09-24T10:46:40Z

IOMMU SNP support requires the completion wait write-back semaphore to be implemented using a 4K-aligned page, where the page address is to be programmed into the newly introduced MMIO base/range registers. This new scheme uses a per-iommu atomic variable to store the current semaphore value, which is incremented for every completion wait command. Since this new scheme is also compatible with non-SNP mode, generalize the driver to use 4K page for completion-wait semaphore in both modes. Signed-off-by: Suravee Suthikulpanit Cc: Brijesh Singh Link: https://lore.kernel.org/r/20200923121347.25365-2-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel

iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE

2020-09-04T09:53:18Z

When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode), current driver disables interrupt remapping when it updates the IRTE so that the upper and lower 64-bit values can be updated safely. However, this creates a small window, where the interrupt could arrive and result in IO_PAGE_FAULT (for interrupt) as shown below. IOMMU Driver Device IRQ ============ =========== irte.RemapEn=0 ... change IRTE IRQ from device ==> IO_PAGE_FAULT !! ... irte.RemapEn=1 This scenario has been observed when changing irq affinity on a system running I/O-intensive workload, in which the destination APIC ID in the IRTE is updated. Instead, use cmpxchg_double() to update the 128-bit IRTE at once without disabling the interrupt remapping. However, this means several features, which require GA (128-bit IRTE) support will also be affected if cmpxchg16b is not supported (which is unprecedented for AMD processors w/ IOMMU). Fixes: 880ac60e2538 ("iommu/amd: Introduce interrupt remapping ops structure") Reported-by: Sean Osborne Signed-off-by: Suravee Suthikulpanit Tested-by: Erik Rockstrom Reviewed-by: Joao Martins Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel

iommu/amd: Fix kerneldoc comments

2020-09-04T08:44:16Z

Fix W=1 compile warnings (invalid kerneldoc): drivers/iommu/amd/init.c:1586: warning: Function parameter or member 'ivrs' not described in 'get_highest_supported_ivhd_type' drivers/iommu/amd/init.c:1938: warning: Function parameter or member 'iommu' not described in 'iommu_update_intcapxt' Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200728170859.28143-1-krzk@kernel.org Signed-off-by: Joerg Roedel

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

iommu/amd: Remove double zero check

2020-07-22T13:26:15Z

The free_pages() does zero check, therefore remove double zero check here. Signed-off-by: Libing Zhou Link: https://lore.kernel.org/r/20200722064450.GA63618@hzling02.china.nsn-net.net Signed-off-by: Joerg Roedel

iommu/amd: Print extended features in one line to fix divergent log levels

2020-06-30T09:52:18Z

Currently, Linux logs the two messages below. [ 0.979142] pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada): [ 0.979546] PPR NX GT IA GA PC GA_vAPIC The log level of these lines differs though. The first one has level *info*, while the second has level *warn*, which is confusing. $ dmesg -T --level=info | grep "Extended features" [Tue Jun 16 21:46:58 2020] pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada): $ dmesg -T --level=warn | grep "PPR" [Tue Jun 16 21:46:58 2020] PPR NX GT IA GA PC GA_vAPIC The problem is, that commit 3928aa3f57 ("iommu/amd: Detect and enable guest vAPIC support") introduced a newline, causing `pr_cont()`, used to print the features, to default back to the default log level. /** * pr_cont - Continues a previous log message in the same line. * @fmt: format string * @...: arguments for the format string * * This macro expands to a printk with KERN_CONT loglevel. It should only be * used when continuing a log message with no newline ('\n') enclosed. Otherwise * it defaults back to KERN_DEFAULT loglevel. */ #define pr_cont(fmt, ...) \ printk(KERN_CONT fmt, ##__VA_ARGS__) So, remove the line break, so only one line is logged. Fixes: 3928aa3f57 ("iommu/amd: Detect and enable guest vAPIC support") Signed-off-by: Paul Menzel Reviewed-by: Suravee Suthikulpanit Cc: Suravee Suthikulpanit Cc: iommu@lists.linux-foundation.org Link: https://lore.kernel.org/r/20200616220420.19466-1-pmenzel@molgen.mpg.de Signed-off-by: Joerg Roedel

iommu/amd: Move AMD IOMMU driver into subdirectory

2020-06-10T15:46:42Z

Move all files related to the AMD IOMMU driver into its own subdirectory. Signed-off-by: Joerg Roedel Reviewed-by: Suravee Suthikulpanit Reviewed-by: Jerry Snitselaar Link: https://lore.kernel.org/r/20200609130303.26974-2-joro@8bytes.org