wireguard-linux/drivers/media/i2c/Makefile, branch jd/orphan-parallel

media: i2c: Add RDACM20 driver

2020-07-19T12:15:42Z

The RDACM20 is a GMSL camera supporting 1280x800 resolution images developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271 GMSL serializer. The GMSL link carries power, control (I2C) and video data over a single coax cable. Signed-off-by: Jacopo Mondi Signed-off-by: Laurent Pinchart Signed-off-by: Niklas Söderlund Signed-off-by: Kieran Bingham Reviewed-by: Rob Herring Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: Add MAX9286 driver

2020-07-19T12:13:51Z

The MAX9286 is a 4-channel GMSL deserializer with coax or STP input and CSI-2 output. The device supports multicamera streaming applications, and features the ability to synchronise the attached cameras. CSI-2 output can be configured with 1 to 4 lanes, and a control channel is supported over I2C, which implements an I2C mux to facilitate communications with connected cameras across the reverse control channel. Signed-off-by: Jacopo Mondi Signed-off-by: Kieran Bingham Signed-off-by: Laurent Pinchart Signed-off-by: Niklas Söderlund Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: dw9768: Add DW9768 VCM driver

2020-07-19T12:11:00Z

Add a V4L2 sub-device driver for DW9768 voice coil motor, providing control to set the desired focus via IIC serial interface. Signed-off-by: Dongchun Zhu Reviewed-by: Tomasz Figa Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: Add ov2740 image sensor driver

2020-05-25T13:43:14Z

OminiVision ov2740 is a 2 megapixels RAW RGB image sensor which can deliver 1920x1080@60fps frames. This driver add the support of vertical blanking, exposure, test pattern, digital and analog gain control for sensor. Signed-off-by: Bingbu Cao Signed-off-by: Shawn Tu Signed-off-by: Qiu, Tianshu Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: Add driver for Sony IMX219 sensor

2020-02-27T20:19:12Z

Adds a driver for the 8MPix Sony IMX219 CSI2 sensor. Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver currently only supports 2 lanes. 8MPix @ 15fps, 1080P @ 30fps (cropped FOV), and 1640x1232 (2x2 binned) @ 30fps are currently supported. [Sakari Ailus: make imx219_check_hwcfg static] Signed-off-by: Dave Stevenson Signed-off-by: Andrey Konovalov Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: hi556: Add support for Hi-556 sensor

2019-11-05T12:12:49Z

Add a V4L2 sub-device driver for Hynix Hi-556 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2592x1944 at 30FPS + 1296x972 at 30FPS [sakari.ailus@linux.intel.com: Remove MEDIA_CAMERA_SUPPORT from Kconfig dependencies] Signed-off-by: Shawn Tu Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: Add IMX290 CMOS image sensor driver

2019-10-24T21:48:03Z

Add driver for Sony IMX290 CMOS image sensor driver. The driver only supports I2C interface for programming and MIPI CSI-2 for sensor output. [Sakari Ailus: Rewrapped a few lines over 80 chars a little.] Signed-off-by: Manivannan Sadhasivam Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: ov5675: Add support for OV5675 sensor

2019-08-15T11:05:15Z

Add a V4L2 sub-device driver for Omnivision ov5675 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2592x1944 at 30FPS + 1296x972 at 30FPS [Sakari Ailus: Wrapped a few long lines.] [mchehab+samsung@kernel.org: fix a checkpatch warning] Signed-off-by: Shawn Tu Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: i2c: fix warning same module names

2019-06-21T20:38:08Z

When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511 enabled as loadable modules, we see the following warning: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko Rework so that the file is named adv7511-v4l2.c. Signed-off-by: Anders Roxell Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver

2019-04-22T15:39:20Z

This V4L2 subdev driver enables STMicroelectronics MIPID02 device. Signed-off-by: Mickael Guene Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab